[PATCH v4] dt-bindings: display: atmel,lcdc: convert to dtschema

[Rob Herring]

On Mon, 18 Mar 2024 11:10:13 +0530, Dharma Balasubiramani wrote:
> Convert the atmel,lcdc bindings to DT schema.
> Changes during conversion: add missing clocks and clock-names properties.
> 
> Signed-off-by: Dharma Balasubiramani <dharma.b at microchip.com>
> ---
> This patch converts the existing lcdc display text binding to JSON schema.
> The binding is split into two namely
> lcdc.yaml
> - Holds the frame buffer properties
> lcdc-display.yaml
> - Holds the display panel properties which is a phandle to the display
> property in lcdc fb node.
> 
> These bindings are tested using the following command.
> 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> ---
> Changes in v4:
> - Add maximum for atmel,guard-time property.
> - Add constraints for bits-per-pixel property.
> - Update the atmel,lcd-wiring-mode property's ref to point single string
>   rather than an array.
> - Add constraints for atmel,lcd-wiring-mode property.
> - Add maxItems to the atmel,power-control-gpio property.
> - Link to v3: https://lore.kernel.org/r/20240304-lcdc-fb-v3-1-8b616fbb0199@microchip.com
> 
> Changes in v3:
> - Remove the generic property "bits-per-pixel"
> - Link to v2: https://lore.kernel.org/r/20240304-lcdc-fb-v2-1-a14b463c157a@microchip.com
> 
> Changes in v2:
> - Run checkpatch and remove whitespace errors.
> - Add the standard interrupt flags.
> - Split the binding into two, namely lcdc.yaml and lcdc-display.yaml.
> - Link to v1: https://lore.kernel.org/r/20240223-lcdc-fb-v1-1-4c64cb6277df@microchip.com
> ---
>  .../bindings/display/atmel,lcdc-display.yaml       | 103 +++++++++++++++++++++
>  .../devicetree/bindings/display/atmel,lcdc.txt     |  87 -----------------
>  .../devicetree/bindings/display/atmel,lcdc.yaml    |  70 ++++++++++++++
>  3 files changed, 173 insertions(+), 87 deletions(-)
> 

Applied, thanks!