[PATCH] drm/msm/dp: Remove now unused connector_type from desc
Bjorn Andersson
quic_bjorande at quicinc.com
Fri Mar 29 04:02:14 UTC 2024
Now that the connector_type is dynamically determined, the
connector_type of the struct msm_dp_desc is unused. Clean it up.
Signed-off-by: Bjorn Andersson <quic_bjorande at quicinc.com>
---
This cleans up after, and hence depends on,
https://lore.kernel.org/all/20240324-x1e80100-display-refactor-connector-v4-1-e0ebaea66a78@linaro.org/
---
drivers/gpu/drm/msm/dp/dp_display.c | 41 ++++++++++++++++++-------------------
1 file changed, 20 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 521cba76d2a0..a18fb8b32c16 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -119,55 +119,54 @@ struct dp_display_private {
struct msm_dp_desc {
phys_addr_t io_start;
unsigned int id;
- unsigned int connector_type;
bool wide_bus_supported;
};
static const struct msm_dp_desc sc7180_dp_descs[] = {
- { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0 },
{}
};
static const struct msm_dp_desc sc7280_dp_descs[] = {
- { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_supported = true },
- { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_supported = true },
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .wide_bus_supported = true },
+ { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_1, .wide_bus_supported = true },
{}
};
static const struct msm_dp_desc sc8180x_dp_descs[] = {
- { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
- { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
- { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP },
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0 },
+ { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1 },
+ { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2 },
{}
};
static const struct msm_dp_desc sc8280xp_dp_descs[] = {
- { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_supported = true },
- { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_supported = true },
- { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_supported = true },
- { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_supported = true },
- { .io_start = 0x22090000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_supported = true },
- { .io_start = 0x22098000, .id = MSM_DP_CONTROLLER_1, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_supported = true },
- { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_supported = true },
- { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_DisplayPort, .wide_bus_supported = true },
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .wide_bus_supported = true },
+ { .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .wide_bus_supported = true },
+ { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .wide_bus_supported = true },
+ { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .wide_bus_supported = true },
+ { .io_start = 0x22090000, .id = MSM_DP_CONTROLLER_0, .wide_bus_supported = true },
+ { .io_start = 0x22098000, .id = MSM_DP_CONTROLLER_1, .wide_bus_supported = true },
+ { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .wide_bus_supported = true },
+ { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .wide_bus_supported = true },
{}
};
static const struct msm_dp_desc sc8280xp_edp_descs[] = {
- { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_supported = true },
- { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_supported = true },
- { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_supported = true },
- { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .connector_type = DRM_MODE_CONNECTOR_eDP, .wide_bus_supported = true },
+ { .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .wide_bus_supported = true },
+ { .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .wide_bus_supported = true },
+ { .io_start = 0x2209a000, .id = MSM_DP_CONTROLLER_2, .wide_bus_supported = true },
+ { .io_start = 0x220a0000, .id = MSM_DP_CONTROLLER_3, .wide_bus_supported = true },
{}
};
static const struct msm_dp_desc sm8350_dp_descs[] = {
- { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ { .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0 },
{}
};
static const struct msm_dp_desc sm8650_dp_descs[] = {
- { .io_start = 0x0af54000, .id = MSM_DP_CONTROLLER_0, .connector_type = DRM_MODE_CONNECTOR_DisplayPort },
+ { .io_start = 0x0af54000, .id = MSM_DP_CONTROLLER_0 },
{}
};
---
base-commit: 8780048e8c13990129e67c097ef580c3ae456650
change-id: 20240328-dp-connector-type-cleanup-af6501e374b3
Best regards,
--
Bjorn Andersson <quic_bjorande at quicinc.com>
More information about the dri-devel
mailing list