[RFT PATCH v2 00/48] drm/panel: Remove most store/double-check of prepared/enabled state
Douglas Anderson
dianders at chromium.org
Fri May 3 21:32:41 UTC 2024
As talked about in commit d2aacaf07395 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
This series attempts to do just that. While the original grep, AKA:
git grep 'if.*>prepared' -- drivers/gpu/drm/panel
git grep 'if.*>enabled' -- drivers/gpu/drm/panel
...still produces a few hits after my series, they are _mostly_ all
gone. The ones that are left are less trivial to fix.
One of the main reasons that many panels probably needed to store and
double-check their prepared/enabled appears to have been to handle
shutdown and/or remove. Panels drivers often wanted to force the power
off for panels in these cases and this was a good reason for the
double-check.
In response to my V1 series [1] we had much discussion of what to
do. The conclusion was that as long as DRM modeset drivers properly
called drm_atomic_helper_shutdown() that we should be able to remove
the explicit shutdown/remove handling in the panel drivers. Most of
the patches to improve DRM modeset drivers [2] [3] [4] have now
landed.
In contrast to my V1 series, I broke the V2 series up a lot
more. Since a few of the panel drivers in V1 already landed, we had
fewer total drivers and so we could devote a patch to each panel.
Also, since we were now relying on DRM modeset drivers I felt like we
should split the patches for each panel into two: one that's
definitely safe and one that could be reverted if we found a
problematic DRM modeset driver that we couldn't fix.
Sorry for the large number of patches. I've set things to mostly just
CC people on the cover letter and the patches that are relevant to
them. I've tried to CC people on the whole series that have shown
interest in this TODO item.
As patches in this series are reviewed and/or tested they could be
landed. There's really no ordering requirement for the series unless
patches touch the same driver.
NOTE: this touches _a lot_ of drivers, is repetitive, and is not
really possible to generate automatically. That means it's entirely
possible that my eyes glazed over and I did something wrong. Please
double-check me and don't assume that I got everything perfect, though
I did my best. I have at least confirmed that "allmodconfig" for arm64
doesn't fall on its face with this series. I haven't done a ton of
other testing.
[1] https://lore.kernel.org/r/20230804140605.RFC.4.I930069a32baab6faf46d6b234f89613b5cec0f14@changeid
[2] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[4] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org
Changes in v2:
- ("drm/panel: raydium-rm692e5: Stop tracking prepared") new for v2.
- Only handle 1 panel per patch.
- Split removal of prepared/enabled from handling of remove/shutdown.
- panel-edp and panel-simple just get a comment now.
Douglas Anderson (48):
drm/panel: raydium-rm692e5: Stop tracking prepared
drm/panel: boe-himax8279d: Stop tracking prepared/enabled
drm/panel: boe-himax8279d: Don't call unprepare+disable at
shutdown/remove
drm/panel: boe-tv101wum-nl6: Stop tracking prepared
drm/panel: boe-tv101wum-nl6: Don't call unprepare+disable at
shutdown/remove
drm/panel: edp: Stop tracking prepared/enabled
drm/panel: edp: Add a comment about unprepare+disable at
shutdown/remove
drm/panel: innolux-p079zca: Stop tracking prepared/enabled
drm/panel: innolux-p079zca: Don't call unprepare+disable at
shutdown/remove
drm/panel: khadas-ts050: Stop tracking prepared/enabled
drm/panel: khadas-ts050: Don't call unprepare+disable at
shutdown/remove
drm/panel: kingdisplay-kd097d04: Stop tracking prepared/enabled
drm/panel: kingdisplay-kd097d04: Don't call unprepare+disable at
shutdown/remove
drm/panel: ltk050h3146w: Stop tracking prepared
drm/panel: ltk050h3146w: Don't call unprepare+disable at
shutdown/remove
drm/panel: ltk500hd1829: Stop tracking prepared
drm/panel: ltk500hd1829: Don't call unprepare+disable at
shutdown/remove
drm/panel: novatek-nt36672a: Stop tracking prepared
drm/panel: novatek-nt36672a: Don't call unprepare+disable at
shutdown/remove
drm/panel: olimex-lcd-olinuxino: Stop tracking prepared/enabled
drm/panel: olimex-lcd-olinuxino: Don't call unprepare+disable at
remove
drm/panel: osd-osd101t2587-53ts: Stop tracking prepared/enabled
drm/panel: osd-osd101t2587-53ts: Don't call unprepare+disable at
shutdown/remove
drm/panel: samsung-atna33xc20: Stop tracking prepared/enabled
drm/panel: samsung-atna33xc20: Don't call unprepare+disable at
shutdown/remove
drm/panel: simple: Stop tracking prepared/enabled
drm/panel: simple: Add a comment about unprepare+disable at
shutdown/remove
drm/panel: tdo-tl070wsh30: Stop tracking prepared
drm/panel: tdo-tl070wsh30: Don't call unprepare+disable at
shutdown/remove
drm/panel: xinpeng-xpp055c272: Stop tracking prepared
drm/panel: xinpeng-xpp055c272: Don't call unprepare+disable at
shutdown/remove
drm/panel: jdi-lt070me05000: Stop tracking prepared/enabled
drm/panel: jdi-lt070me05000: Don't call disable at shutdown/remove
drm/panel: panasonic-vvx10f034n00: Stop tracking prepared/enabled
drm/panel: panasonic-vvx10f034n00: Don't call disable at
shutdown/remove
drm/panel: seiko-43wvf1g: Stop tracking prepared/enabled
drm/panel: seiko-43wvf1g: Don't call disable at shutdown/remove
drm/panel: sharp-lq101r1sx01: Stop tracking prepared/enabled
drm/panel: sharp-lq101r1sx01: Don't call disable at shutdown/remove
drm/panel: sharp-ls043t1le01: Stop tracking prepared
drm/panel: sharp-ls043t1le01: Don't call disable at shutdown/remove
drm/panel: sitronix-st7703: Stop tracking prepared
drm/panel: sitronix-st7703: Don't call disable at shutdown/remove
drm/panel: raydium-rm67191: Stop tracking enabled
drm/panel: raydium-rm67191: Don't call unprepare+disable at shutdown
drm/panel: sony-acx565akm: Don't double-check enabled state in disable
drm/panel: sony-acx565akm: Don't call disable at remove
drm/panel: Update TODO list item for cleaning up prepared/enabled
tracking
Documentation/gpu/todo.rst | 47 +++++++-------
drivers/gpu/drm/panel/panel-boe-himax8279d.c | 40 ------------
.../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 23 -------
drivers/gpu/drm/panel/panel-edp.c | 60 +++++++-----------
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 55 ----------------
.../gpu/drm/panel/panel-jdi-lt070me05000.c | 35 -----------
drivers/gpu/drm/panel/panel-khadas-ts050.c | 39 ------------
.../drm/panel/panel-kingdisplay-kd097d04.c | 48 --------------
.../drm/panel/panel-leadtek-ltk050h3146w.c | 28 ---------
.../drm/panel/panel-leadtek-ltk500hd1829.c | 28 ---------
.../gpu/drm/panel/panel-novatek-nt36672a.c | 29 ---------
.../drm/panel/panel-olimex-lcd-olinuxino.c | 44 -------------
.../drm/panel/panel-osd-osd101t2587-53ts.c | 41 +-----------
.../drm/panel/panel-panasonic-vvx10f034n00.c | 47 +-------------
drivers/gpu/drm/panel/panel-raydium-rm67191.c | 26 --------
drivers/gpu/drm/panel/panel-raydium-rm692e5.c | 10 ---
.../gpu/drm/panel/panel-samsung-atna33xc20.c | 36 -----------
drivers/gpu/drm/panel/panel-seiko-43wvf1g.c | 49 ---------------
.../gpu/drm/panel/panel-sharp-lq101r1sx01.c | 63 +------------------
.../gpu/drm/panel/panel-sharp-ls043t1le01.c | 24 -------
drivers/gpu/drm/panel/panel-simple.c | 60 +++++++-----------
drivers/gpu/drm/panel/panel-sitronix-st7703.c | 35 +++--------
drivers/gpu/drm/panel/panel-sony-acx565akm.c | 6 --
drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c | 23 -------
.../gpu/drm/panel/panel-xinpeng-xpp055c272.c | 28 ---------
25 files changed, 83 insertions(+), 841 deletions(-)
--
2.45.0.rc1.225.g2a3ae87e7f-goog
More information about the dri-devel
mailing list