[RFT PATCH v2 27/48] drm/panel: simple: Add a comment about unprepare+disable at shutdown/remove

Douglas Anderson dianders at chromium.org
Fri May 3 21:33:08 UTC 2024


It's the responsibility of a correctly written DRM modeset driver to
call drm_atomic_helper_shutdown() at shutdown time and that should be
disabling / unpreparing the panel if needed. Panel drivers shouldn't
be calling these functions themselves.

A recent effort was made to fix as many DRM modeset drivers as
possible [1] [2] [3] and most drivers are fixed now.

Unfortunately, it's very difficult to know exactly which DRM modeset
drivers are using panel-simple due to the sheer number of panels it
handles. For now, we'll leave the calls and just add a comment to keep
people from copying this code.

[1] https://lore.kernel.org/r/20230901234015.566018-1-dianders@chromium.org
[2] https://lore.kernel.org/r/20230901234202.566951-1-dianders@chromium.org
[3] https://lore.kernel.org/r/20230921192749.1542462-1-dianders@chromium.org

Signed-off-by: Douglas Anderson <dianders at chromium.org>
---

Changes in v2:
- Only handle 1 panel per patch.
- Split removal of prepared/enabled from handling of remove/shutdown.
- panel-edp and panel-simple just get a comment now.

 drivers/gpu/drm/panel/panel-simple.c | 33 +++++++++++++++++++---------
 1 file changed, 23 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 42d902d2bbbe..f39122ffdead 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -716,26 +716,39 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
 	return err;
 }
 
-static void panel_simple_remove(struct device *dev)
+static void panel_simple_shutdown(struct device *dev)
 {
 	struct panel_simple *panel = dev_get_drvdata(dev);
 
-	drm_panel_remove(&panel->base);
+	/*
+	 * NOTE: the following two calls don't really belong here. It is the
+	 * responsibility of a correctly written DRM modeset driver to call
+	 * drm_atomic_helper_shutdown() at shutdown time and that should
+	 * cause the panel to be disabled / unprepared if needed. For now,
+	 * however, we'll keep these calls due to the sheer number of
+	 * different DRM modeset drivers used with panel-simple. The fact that
+	 * we're calling these and _also_ the drm_atomic_helper_shutdown()
+	 * will try to disable/unprepare means that we can get a warning about
+	 * trying to disable/unprepare an already disabled/unprepared panel,
+	 * but that's something we'll have to live with until we've confirmed
+	 * that all DRM modeset drivers are properly calling
+	 * drm_atomic_helper_shutdown().
+	 */
 	drm_panel_disable(&panel->base);
 	drm_panel_unprepare(&panel->base);
-
-	pm_runtime_dont_use_autosuspend(dev);
-	pm_runtime_disable(dev);
-	if (panel->ddc)
-		put_device(&panel->ddc->dev);
 }
 
-static void panel_simple_shutdown(struct device *dev)
+static void panel_simple_remove(struct device *dev)
 {
 	struct panel_simple *panel = dev_get_drvdata(dev);
 
-	drm_panel_disable(&panel->base);
-	drm_panel_unprepare(&panel->base);
+	drm_panel_remove(&panel->base);
+	panel_simple_shutdown(dev);
+
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_disable(dev);
+	if (panel->ddc)
+		put_device(&panel->ddc->dev);
 }
 
 static const struct drm_display_mode ampire_am_1280800n3tzqw_t00h_mode = {
-- 
2.45.0.rc1.225.g2a3ae87e7f-goog



More information about the dri-devel mailing list