[PATCH v9 1/8] x86/vmware: Move common macros to vmware.h
Alexey Makhalov
alexey.makhalov at broadcom.com
Mon May 6 21:52:58 UTC 2024
Move VMware hypercall macros to vmware.h. This is a prerequisite for
the introduction of vmware_hypercall API. No functional changes besides
exporting vmware_hypercall_mode symbol.
Signed-off-by: Alexey Makhalov <alexey.makhalov at broadcom.com>
Reviewed-by: Nadav Amit <nadav.amit at gmail.com>
---
arch/x86/include/asm/vmware.h | 72 +++++++++++++++++++++++++++++------
arch/x86/kernel/cpu/vmware.c | 49 +-----------------------
2 files changed, 62 insertions(+), 59 deletions(-)
diff --git a/arch/x86/include/asm/vmware.h b/arch/x86/include/asm/vmware.h
index ac9fc51e2b18..de2533337611 100644
--- a/arch/x86/include/asm/vmware.h
+++ b/arch/x86/include/asm/vmware.h
@@ -8,25 +8,34 @@
/*
* The hypercall definitions differ in the low word of the %edx argument
- * in the following way: the old port base interface uses the port
- * number to distinguish between high- and low bandwidth versions.
+ * in the following way: the old I/O port based interface uses the port
+ * number to distinguish between high- and low bandwidth versions, and
+ * uses IN/OUT instructions to define transfer direction.
*
* The new vmcall interface instead uses a set of flags to select
* bandwidth mode and transfer direction. The flags should be loaded
* into %dx by any user and are automatically replaced by the port
- * number if the VMWARE_HYPERVISOR_PORT method is used.
- *
- * In short, new driver code should strictly use the new definition of
- * %dx content.
+ * number if the I/O port method is used.
*/
-/* Old port-based version */
-#define VMWARE_HYPERVISOR_PORT 0x5658
-#define VMWARE_HYPERVISOR_PORT_HB 0x5659
+#define VMWARE_HYPERVISOR_HB BIT(0)
+#define VMWARE_HYPERVISOR_OUT BIT(1)
+
+#define VMWARE_HYPERVISOR_PORT 0x5658
+#define VMWARE_HYPERVISOR_PORT_HB (VMWARE_HYPERVISOR_PORT | \
+ VMWARE_HYPERVISOR_HB)
+
+#define VMWARE_HYPERVISOR_MAGIC 0x564d5868U
+
+#define VMWARE_CMD_GETVERSION 10
+#define VMWARE_CMD_GETHZ 45
+#define VMWARE_CMD_GETVCPU_INFO 68
+#define VMWARE_CMD_STEALCLOCK 91
+
+#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
+#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
-/* Current vmcall / vmmcall version */
-#define VMWARE_HYPERVISOR_HB BIT(0)
-#define VMWARE_HYPERVISOR_OUT BIT(1)
+extern u8 vmware_hypercall_mode;
/* The low bandwidth call. The low word of edx is presumed clear. */
#define VMWARE_HYPERCALL \
@@ -54,4 +63,43 @@
"rep insb", \
"vmcall", X86_FEATURE_VMCALL, \
"vmmcall", X86_FEATURE_VMW_VMMCALL)
+
+#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
+ __asm__("inl (%%dx), %%eax" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
+ __asm__("vmmcall" : \
+ "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
+ "a"(VMWARE_HYPERVISOR_MAGIC), \
+ "c"(VMWARE_CMD_##cmd), \
+ "d"(0), "b"(UINT_MAX) : \
+ "memory")
+
+#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
+ switch (vmware_hypercall_mode) { \
+ case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
+ VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
+ VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
+ break; \
+ default: \
+ VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
+ break; \
+ } \
+ } while (0)
+
#endif
diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c
index 11f83d07925e..68d812e12e52 100644
--- a/arch/x86/kernel/cpu/vmware.c
+++ b/arch/x86/kernel/cpu/vmware.c
@@ -41,60 +41,14 @@
#define CPUID_VMWARE_INFO_LEAF 0x40000000
#define CPUID_VMWARE_FEATURES_LEAF 0x40000010
-#define CPUID_VMWARE_FEATURES_ECX_VMMCALL BIT(0)
-#define CPUID_VMWARE_FEATURES_ECX_VMCALL BIT(1)
-#define VMWARE_HYPERVISOR_MAGIC 0x564D5868
-
-#define VMWARE_CMD_GETVERSION 10
-#define VMWARE_CMD_GETHZ 45
-#define VMWARE_CMD_GETVCPU_INFO 68
#define VMWARE_CMD_LEGACY_X2APIC 3
#define VMWARE_CMD_VCPU_RESERVED 31
-#define VMWARE_CMD_STEALCLOCK 91
#define STEALCLOCK_NOT_AVAILABLE (-1)
#define STEALCLOCK_DISABLED 0
#define STEALCLOCK_ENABLED 1
-#define VMWARE_PORT(cmd, eax, ebx, ecx, edx) \
- __asm__("inl (%%dx), %%eax" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(VMWARE_HYPERVISOR_PORT), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx) \
- __asm__("vmmcall" : \
- "=a"(eax), "=c"(ecx), "=d"(edx), "=b"(ebx) : \
- "a"(VMWARE_HYPERVISOR_MAGIC), \
- "c"(VMWARE_CMD_##cmd), \
- "d"(0), "b"(UINT_MAX) : \
- "memory")
-
-#define VMWARE_CMD(cmd, eax, ebx, ecx, edx) do { \
- switch (vmware_hypercall_mode) { \
- case CPUID_VMWARE_FEATURES_ECX_VMCALL: \
- VMWARE_VMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- case CPUID_VMWARE_FEATURES_ECX_VMMCALL: \
- VMWARE_VMMCALL(cmd, eax, ebx, ecx, edx); \
- break; \
- default: \
- VMWARE_PORT(cmd, eax, ebx, ecx, edx); \
- break; \
- } \
- } while (0)
-
struct vmware_steal_time {
union {
uint64_t clock; /* stolen time counter in units of vtsc */
@@ -108,7 +62,8 @@ struct vmware_steal_time {
};
static unsigned long vmware_tsc_khz __ro_after_init;
-static u8 vmware_hypercall_mode __ro_after_init;
+u8 vmware_hypercall_mode __ro_after_init;
+EXPORT_SYMBOL_GPL(vmware_hypercall_mode);
static inline int __vmware_platform(void)
{
--
2.39.0
More information about the dri-devel
mailing list