[PATCH v4 2/7] drm/panel: himax-hx83102: Break out as separate driver

[cong yang]

Hi,

Doug Anderson <dianders at chromium.org> 于2024年5月8日周三 07:35写道：
>
> Hi,
>
> On Tue, May 7, 2024 at 6:53 AM Cong Yang
> <yangcong5 at huaqin.corp-partner.google.com> wrote:
> >
> > +static int hx83102_enable_extended_cmds(struct hx83102 *ctx, bool enable)
> > +{
> > +       struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
> > +
> > +       if (enable)
> > +               mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETEXTC, 0x83, 0x10, 0x21, 0x55, 0x00);
> > +       else
> > +               mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETEXTC, 0x00, 0x00, 0x00);
> > +
> > +       return 0;
>
> You're throwing away the error codes returned by the
> mipi_dsi_dcs_write_seq_multi(), which you shouldn't do. You have two
> options:
>
> Option #1: return dsi_ctx.accum_err here and then check the return
> value in callers.
>
> Option #2: instead of having this function take "struct hx83102 *ctx",
> just have it take "struct mipi_dsi_multi_context *dsi_ctx". Then it
> can return void and everything will be fine.
>
> I'd prefer option #2 but either is OK w/ me.

Ok,I will fix in V4, thanks.

>
>
> > +static int starry_himax83102_j02_init(struct hx83102 *ctx)
> > +{
> > +       struct mipi_dsi_multi_context dsi_ctx = { .dsi = ctx->dsi };
> > +
> > +       hx83102_enable_extended_cmds(ctx, true);
> > +       mipi_dsi_dcs_write_seq_multi(&dsi_ctx, HX83102_SETPOWER, 0x2c, 0xb5, 0xb5, 0x31, 0xf1,
> > +                                        0x31, 0xd7, 0x2f, 0x36, 0x36, 0x36, 0x36, 0x1a, 0x8b, 0x11,
> > +                                        0x65, 0x00, 0x88, 0xfa, 0xff, 0xff, 0x8f, 0xff, 0x08, 0x74,
> > +                                        0x33);
>
> The indentation is still off here. You have 5 tabs followed by a
> space. To make things line up with the opening brace I think it should
> be 4 tabs followed by 5 spaces.

Sorry, my  editor 'Visual Studio Code' It seems that the correct indentation
is not recognized. I have checked it through the 'vim' editor in the V4 version.
Thanks.

>
>
> > +static int hx83102_enable(struct drm_panel *panel)
> > +{
> > +       struct hx83102 *ctx = panel_to_hx83102(panel);
> > +       struct mipi_dsi_device *dsi = ctx->dsi;
> > +       struct device *dev = &dsi->dev;
> > +       int ret;
> > +
> > +       ret = ctx->desc->init(ctx);
> > +       if (ret)
> > +               return ret;
>
> You're still changing behavior here. In the old boe-tv101wum-nl6
> driver the init() function was invoked at the end of prepare(). Now
> you've got it at the beginning of enable(). If this change is
> important it should be in a separate commit and explained.
>
>
> > +       ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> > +       if (ret) {
> > +               dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
> > +               return ret;
> > +       }
> > +
> > +       msleep(120);
> > +
> > +       ret = mipi_dsi_dcs_set_display_on(dsi);
> > +       if (ret) {
> > +               dev_err(dev, "Failed to turn on the display: %d\n", ret);
> > +       }
>
> The old boe-tv101wum-nl6 driver didn't call
> mipi_dsi_dcs_exit_sleep_mode() nor mipi_dsi_dcs_set_display_on() in
> its enable routine, did it? If this change is important please put it
> in a separate change and justify it.

In the old boe-tv101wum-nl6 driver inital cmds was invoked at the end of
prepare() function , and call 0x11 and 0x29 at end of inital. For
himax-hx83102 driver, we move inital cmds invoked at enable() function.
For panel timing, I think there is no much difference. They are
all initial cmds executed after meeting the power-on sequence.
I will update these in the v4 commit message.

>
>
> -Doug