[PATCH] drm/i915/gt: Disarm breadcrumbs if engines are already idle

Andrzej Hajda andrzej.hajda at intel.com
Thu May 9 12:41:19 UTC 2024


On 23.04.2024 18:23, Janusz Krzysztofik wrote:
> From: Chris Wilson <chris at chris-wilson.co.uk>
> 
> The breadcrumbs use a GT wakeref for guarding the interrupt, but are
> disarmed during release of the engine wakeref. This leaves a hole where
> we may attach a breadcrumb just as the engine is parking (after it has
> parked its breadcrumbs), execute the irq worker with some signalers still
> attached, but never be woken again.
> 
> That issue manifests itself in CI with IGT runner timeouts while tests
> are waiting indefinitely for release of all GT wakerefs.
> 
> <6> [209.151778] i915: Running live_engine_pm_selftests/live_engine_busy_stats
> <7> [209.231628] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_5
> <7> [209.231816] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_4
> <7> [209.231944] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_3
> <7> [209.232056] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling PW_2
> <7> [209.232166] i915 0000:00:02.0: [drm:intel_power_well_disable [i915]] disabling DC_off
> <7> [209.232270] i915 0000:00:02.0: [drm:skl_enable_dc6 [i915]] Enabling DC6
> <7> [209.232368] i915 0000:00:02.0: [drm:gen9_set_dc_state.part.0 [i915]] Setting DC state from 00 to 02
> <4> [299.356116] [IGT] Inactivity timeout exceeded. Killing the current test with SIGQUIT.
> ...
> <6> [299.356526] sysrq: Show State
> ...
> <6> [299.373964] task:i915_selftest   state:D stack:11784 pid:5578  tgid:5578  ppid:873    flags:0x00004002
> <6> [299.373967] Call Trace:
> <6> [299.373968]  <TASK>
> <6> [299.373970]  __schedule+0x3bb/0xda0
> <6> [299.373974]  schedule+0x41/0x110
> <6> [299.373976]  intel_wakeref_wait_for_idle+0x82/0x100 [i915]
> <6> [299.374083]  ? __pfx_var_wake_function+0x10/0x10
> <6> [299.374087]  live_engine_busy_stats+0x9b/0x500 [i915]
> <6> [299.374173]  __i915_subtests+0xbe/0x240 [i915]
> <6> [299.374277]  ? __pfx___intel_gt_live_setup+0x10/0x10 [i915]
> <6> [299.374369]  ? __pfx___intel_gt_live_teardown+0x10/0x10 [i915]
> <6> [299.374456]  intel_engine_live_selftests+0x1c/0x30 [i915]
> <6> [299.374547]  __run_selftests+0xbb/0x190 [i915]
> <6> [299.374635]  i915_live_selftests+0x4b/0x90 [i915]
> <6> [299.374717]  i915_pci_probe+0x10d/0x210 [i915]
> 
> At the end of the interrupt worker, if there are no more engines awake,
> disarm the breadcrumb and go to sleep.
> 
> Fixes: 9d5612ca165a ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission")
> Closes: https://gitlab.freedesktop.org/drm/intel/issues/10026
> Signed-off-by: Chris Wilson <chris at chris-wilson.co.uk>
> Cc: Andrzej Hajda <andrzej.hajda at intel.com>
> Cc: <stable at vger.kernel.org> # v5.12+
> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik at linux.intel.com>

Completely forgot this one.

Reviewed-by: Andrzej Hajda <andrzej.hajda at intel.com>

Regards
Andrzej


> ---
>   drivers/gpu/drm/i915/gt/intel_breadcrumbs.c | 15 +++++++--------
>   1 file changed, 7 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c b/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
> index d650beb8ed22f..20b9b04ec1e0b 100644
> --- a/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
> +++ b/drivers/gpu/drm/i915/gt/intel_breadcrumbs.c
> @@ -263,8 +263,13 @@ static void signal_irq_work(struct irq_work *work)
>   		i915_request_put(rq);
>   	}
>   
> +	/* Lazy irq enabling after HW submission */
>   	if (!READ_ONCE(b->irq_armed) && !list_empty(&b->signalers))
>   		intel_breadcrumbs_arm_irq(b);
> +
> +	/* And confirm that we still want irqs enabled before we yield */
> +	if (READ_ONCE(b->irq_armed) && !atomic_read(&b->active))
> +		intel_breadcrumbs_disarm_irq(b);
>   }
>   
>   struct intel_breadcrumbs *
> @@ -315,13 +320,7 @@ void __intel_breadcrumbs_park(struct intel_breadcrumbs *b)
>   		return;
>   
>   	/* Kick the work once more to drain the signalers, and disarm the irq */
> -	irq_work_sync(&b->irq_work);
> -	while (READ_ONCE(b->irq_armed) && !atomic_read(&b->active)) {
> -		local_irq_disable();
> -		signal_irq_work(&b->irq_work);
> -		local_irq_enable();
> -		cond_resched();
> -	}
> +	irq_work_queue(&b->irq_work);
>   }
>   
>   void intel_breadcrumbs_free(struct kref *kref)
> @@ -404,7 +403,7 @@ static void insert_breadcrumb(struct i915_request *rq)
>   	 * the request as it may have completed and raised the interrupt as
>   	 * we were attaching it into the lists.
>   	 */
> -	if (!b->irq_armed || __i915_request_is_complete(rq))
> +	if (!READ_ONCE(b->irq_armed) || __i915_request_is_complete(rq))
>   		irq_work_queue(&b->irq_work);
>   }
>   



More information about the dri-devel mailing list