[PATCH v3 0/7] Add DSI support for RK3128

[Alex Bee]

This series aims to add support for the DesignWare MIPI DSI controller and
the Innoslicon D-PHY found in RK3128 SoCs. The code additions are rather
tiny: It only need some code in the Rockchip dw-mipi-dsi glue layer for
this SoC and do some changes in the SoC's clock driver. Support for the phy
was already added when the Innosilicon D-PHY driver was initially
submitted. I tested it with a 800x1280 DSI panel where all 4 lanes that are
supported are used.

changes in v2:
  To improve power-efficiency when the DSI controller is not in use, I
  dropped the patch which made hclk_vio_h2p a critical clock and instead
  added support for an AHB clock to the DSI controller driver and updated
  the bindings and the addition to the SoC DT accordingly.

Link to v1:
https://lore.kernel.org/linux-kernel/20240506194343.282119-1-knaerzche@gmail.com/

changes in v3:
 Dropped the changes for the additional AHB clock for the DSI controller,
 as it's not part of the IP block. (Heiko)

Link to v2:
https://lore.kernel.org/linux-kernel/20240509120715.86694-1-knaerzche@gmail.com/

Please see individual patches for details about the changes.

Alex Bee (7):
  dt-bindings: display: rockchip,dw-mipi-dsi: Document RK3128 DSI
  dt-bindings: clock: rk3128: Add PCLK_MIPIPHY
  clk: rockchip: rk3128: Export PCLK_MIPIPHY
  clk: rockchip: rk3128: Add hclk_vio_h2p to critical clocks
  drm/rockchip: dsi: Add support for RK3128
  ARM: dts: rockchip: Add D-PHY for RK3128
  ARM: dts: rockchip: Add DSI for RK3128

 .../rockchip/rockchip,dw-mipi-dsi.yaml        |  2 +
 arch/arm/boot/dts/rockchip/rk3128.dtsi        | 50 +++++++++++++++++++
 drivers/clk/rockchip/clk-rk3128.c             |  3 +-
 .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c   | 20 ++++++++
 include/dt-bindings/clock/rk3128-cru.h        |  1 +
 5 files changed, 75 insertions(+), 1 deletion(-)

-- 
2.43.2