[PATCH] drm/bridge: adv7511: Attach next bridge without creating connector

[Liu Ying]

The connector is created by either this ADV7511 bridge driver or
any DRM device driver/previous bridge driver, so this ADV7511
bridge driver should not let the next bridge driver create connector.

If the next bridge is a HDMI connector, the next bridge driver
would fail to attach bridge from display_connector_attach() without
the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.

Add that flag to drm_bridge_attach() function call in
adv7511_bridge_attach() to fix the issue.

This fixes the issue where the HDMI connector bridge fails to attach
to the previous ADV7535 bridge on i.MX8MP EVK platform:

[    2.216442] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /hdmi-connector to encoder None-37: -22
[    2.220675] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using ADMA
[    2.226262] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc at 0/bus at 30800000/i2c at 30a30000/hdmi at 3d to encoder None-37: -22
[    2.245204] [drm:drm_bridge_attach] *ERROR* failed to attach bridge /soc at 0/bus at 32c00000/dsi at 32e60000 to encoder None-37: -22
[    2.256445] imx-lcdif 32e80000.display-controller: error -EINVAL: Failed to attach bridge for endpoint0
[    2.265850] imx-lcdif 32e80000.display-controller: error -EINVAL: Cannot connect bridge
[    2.274009] imx-lcdif 32e80000.display-controller: probe with driver imx-lcdif failed with error -22

Fixes: 14b3cdbd0e5b ("drm/bridge: adv7511: make it honour next bridge in DT")
Signed-off-by: Liu Ying <victor.liu at nxp.com>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index dd21b81bd28f..66ccb61e2a66 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -953,7 +953,8 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge,
 	int ret = 0;
 
 	if (adv->next_bridge) {
-		ret = drm_bridge_attach(bridge->encoder, adv->next_bridge, bridge, flags);
+		ret = drm_bridge_attach(bridge->encoder, adv->next_bridge, bridge,
+					flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR);
 		if (ret)
 			return ret;
 	}
-- 
2.34.1