[PATCH] drm/bridge: adv7511: Exit interrupt handling when necessary

[Liu Ying]

Commit f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
fails to consider the case where adv7511->i2c_main->irq is zero, i.e.,
no interrupt requested at all.

Without interrupt, adv7511_wait_for_edid() could return -EIO sometimes,
because it polls adv7511->edid_read flag by calling adv7511_irq_process()
a few times, but adv7511_irq_process() happens to refuse to handle
interrupt by returning -ENODATA.  Hence, EDID retrieval fails randomly.

Fix the issue by checking adv7511->i2c_main->irq before exiting interrupt
handling from adv7511_irq_process().

Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
Signed-off-by: Liu Ying <victor.liu at nxp.com>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 6089b0bb9321..2074fa3c1b7b 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -479,7 +479,8 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
 		return ret;
 
 	/* If there is no IRQ to handle, exit indicating no IRQ data */
-	if (!(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
+	if (adv7511->i2c_main->irq &&
+	    !(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
 	    !(irq1 & ADV7511_INT1_DDC_ERROR))
 		return -ENODATA;
 
-- 
2.37.1