[PATCH v3 1/3] gpu: ipu-v3: pre: move state into struct
Lucas Stach
l.stach at pengutronix.de
Fri May 17 10:45:47 UTC 2024
Move the variables tracking the current dynamic state into a struct
to separate it a bit better from the static device properties.
Signed-off-by: Lucas Stach <l.stach at pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel at pengutronix.de>
---
v2/v3: no changes
---
drivers/gpu/ipu-v3/ipu-pre.c | 27 +++++++++++++++------------
1 file changed, 15 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-pre.c b/drivers/gpu/ipu-v3/ipu-pre.c
index aef984a43190..0d4e882fe8f1 100644
--- a/drivers/gpu/ipu-v3/ipu-pre.c
+++ b/drivers/gpu/ipu-v3/ipu-pre.c
@@ -96,9 +96,12 @@ struct ipu_pre {
dma_addr_t buffer_paddr;
void *buffer_virt;
- bool in_use;
- unsigned int safe_window_end;
- unsigned int last_bufaddr;
+
+ struct {
+ bool in_use;
+ unsigned int safe_window_end;
+ unsigned int bufaddr;
+ } cur;
};
static DEFINE_MUTEX(ipu_pre_list_mutex);
@@ -138,7 +141,7 @@ int ipu_pre_get(struct ipu_pre *pre)
{
u32 val;
- if (pre->in_use)
+ if (pre->cur.in_use)
return -EBUSY;
/* first get the engine out of reset and remove clock gating */
@@ -151,7 +154,7 @@ int ipu_pre_get(struct ipu_pre *pre)
IPU_PRE_CTRL_SDW_UPDATE;
writel(val, pre->regs + IPU_PRE_CTRL);
- pre->in_use = true;
+ pre->cur.in_use = true;
return 0;
}
@@ -159,7 +162,7 @@ void ipu_pre_put(struct ipu_pre *pre)
{
writel(IPU_PRE_CTRL_SFTRST, pre->regs + IPU_PRE_CTRL);
- pre->in_use = false;
+ pre->cur.in_use = false;
}
void ipu_pre_configure(struct ipu_pre *pre, unsigned int width,
@@ -172,13 +175,13 @@ void ipu_pre_configure(struct ipu_pre *pre, unsigned int width,
/* calculate safe window for ctrl register updates */
if (modifier == DRM_FORMAT_MOD_LINEAR)
- pre->safe_window_end = height - 2;
+ pre->cur.safe_window_end = height - 2;
else
- pre->safe_window_end = DIV_ROUND_UP(height, 4) - 1;
+ pre->cur.safe_window_end = DIV_ROUND_UP(height, 4) - 1;
writel(bufaddr, pre->regs + IPU_PRE_CUR_BUF);
writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
- pre->last_bufaddr = bufaddr;
+ pre->cur.bufaddr = bufaddr;
val = IPU_PRE_PREF_ENG_CTRL_INPUT_PIXEL_FORMAT(0) |
IPU_PRE_PREF_ENG_CTRL_INPUT_ACTIVE_BPP(active_bpp) |
@@ -236,11 +239,11 @@ void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr)
unsigned short current_yblock;
u32 val;
- if (bufaddr == pre->last_bufaddr)
+ if (bufaddr == pre->cur.bufaddr)
return;
writel(bufaddr, pre->regs + IPU_PRE_NEXT_BUF);
- pre->last_bufaddr = bufaddr;
+ pre->cur.bufaddr = bufaddr;
do {
if (time_after(jiffies, timeout)) {
@@ -252,7 +255,7 @@ void ipu_pre_update(struct ipu_pre *pre, unsigned int bufaddr)
current_yblock =
(val >> IPU_PRE_STORE_ENG_STATUS_STORE_BLOCK_Y_SHIFT) &
IPU_PRE_STORE_ENG_STATUS_STORE_BLOCK_Y_MASK;
- } while (current_yblock == 0 || current_yblock >= pre->safe_window_end);
+ } while (current_yblock == 0 || current_yblock >= pre->cur.safe_window_end);
writel(IPU_PRE_CTRL_SDW_UPDATE, pre->regs + IPU_PRE_CTRL_SET);
}
--
2.39.2
More information about the dri-devel
mailing list