[PATCH 4/8] drm/panel: ilitek-ili9882t: If prepare fails, disable GPIO before regulators
Douglas Anderson
dianders at chromium.org
Fri May 17 21:36:39 UTC 2024
The enable GPIO should clearly be set low before turning off
regulators. That matches both the inverse order that things were
enabled and also the order in unprepare().
Fixes: e2450d32e5fb ("drm/panel: ili9882t: Break out as separate driver")
Signed-off-by: Douglas Anderson <dianders at chromium.org>
---
drivers/gpu/drm/panel/panel-ilitek-ili9882t.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9882t.c b/drivers/gpu/drm/panel/panel-ilitek-ili9882t.c
index 830d7cfbe857..a2ea25bb6624 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9882t.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9882t.c
@@ -495,13 +495,13 @@ static int ili9882t_prepare(struct drm_panel *panel)
return 0;
poweroff:
+ gpiod_set_value(ili->enable_gpio, 0);
regulator_disable(ili->avee);
poweroffavdd:
regulator_disable(ili->avdd);
poweroff1v8:
usleep_range(5000, 7000);
regulator_disable(ili->pp1800);
- gpiod_set_value(ili->enable_gpio, 0);
return ret;
}
--
2.45.0.rc1.225.g2a3ae87e7f-goog
More information about the dri-devel
mailing list