[PATCH 3/8] drm/panel: boe-tv101wum-nl6: Check for errors on the NOP in prepare()

Douglas Anderson dianders at chromium.org
Fri May 17 21:36:38 UTC 2024


The mipi_dsi_dcs_nop() function returns an error but we weren't
checking it in boe_panel_prepare(). Add a check. This is highly
unlikely to matter in practice. If the NOP failed then likely later
MIPI commands would fail too.

Found by code inspection.

Fixes: 812562b8d881 ("drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence")
Signed-off-by: Douglas Anderson <dianders at chromium.org>
---

 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
index 028625d2d37d..f7beace455c3 100644
--- a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -1456,7 +1456,11 @@ static int boe_panel_prepare(struct drm_panel *panel)
 	usleep_range(10000, 11000);
 
 	if (boe->desc->lp11_before_reset) {
-		mipi_dsi_dcs_nop(boe->dsi);
+		ret = mipi_dsi_dcs_nop(boe->dsi);
+		if (ret < 0) {
+			dev_err(&boe->dsi->dev, "Failed to send NOP: %d\n", ret);
+			goto poweroff;
+		}
 		usleep_range(1000, 2000);
 	}
 	gpiod_set_value(boe->enable_gpio, 1);
-- 
2.45.0.rc1.225.g2a3ae87e7f-goog



More information about the dri-devel mailing list