[PATCH] drm/bridge: adv7511: Exit interrupt handling when necessary

Liu Ying victor.liu at nxp.com
Mon May 20 09:26:05 UTC 2024


On 5/20/24 17:08, Dmitry Baryshkov wrote:
> On Mon, 20 May 2024 at 06:29, Liu Ying <victor.liu at nxp.com> wrote:
>>
>> On 5/20/24 06:11, Dmitry Baryshkov wrote:
>>> On Thu, May 16, 2024 at 06:10:06PM +0800, Liu Ying wrote:
>>>> Commit f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
>>>> fails to consider the case where adv7511->i2c_main->irq is zero, i.e.,
>>>> no interrupt requested at all.
>>>>
>>>> Without interrupt, adv7511_wait_for_edid() could return -EIO sometimes,
>>>> because it polls adv7511->edid_read flag by calling adv7511_irq_process()
>>>> a few times, but adv7511_irq_process() happens to refuse to handle
>>>> interrupt by returning -ENODATA.  Hence, EDID retrieval fails randomly.
>>>>
>>>> Fix the issue by checking adv7511->i2c_main->irq before exiting interrupt
>>>> handling from adv7511_irq_process().
>>>>
>>>> Fixes: f3d9683346d6 ("drm/bridge: adv7511: Allow IRQ to share GPIO pins")
>>>> Signed-off-by: Liu Ying <victor.liu at nxp.com>
>>>> ---
>>>>  drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 3 ++-
>>>>  1 file changed, 2 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>>> index 6089b0bb9321..2074fa3c1b7b 100644
>>>> --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>>> +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
>>>> @@ -479,7 +479,8 @@ static int adv7511_irq_process(struct adv7511 *adv7511, bool process_hpd)
>>>>              return ret;
>>>>
>>>>      /* If there is no IRQ to handle, exit indicating no IRQ data */
>>>> -    if (!(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
>>>> +    if (adv7511->i2c_main->irq &&
>>>> +        !(irq0 & (ADV7511_INT0_HPD | ADV7511_INT0_EDID_READY)) &&
>>>>          !(irq1 & ADV7511_INT1_DDC_ERROR))
>>>>              return -ENODATA;
>>>
>>> I think it might be better to handle -ENODATA in adv7511_wait_for_edid()
>>> instead. WDYT?
>>
>> Then, adv7511_cec_irq_process() will have less chance to be called from
>> adv7511_irq_process() (assuming CONFIG_DRM_I2C_ADV7511_CEC is defined)
>> if adv7511->i2c_main->irq is zero.
>>
>> But, anyway, it seems that commit f3d9683346d6 ("drm/bridge: adv7511:
>> Allow IRQ to share GPIO pins") is even more broken to handle the CEC case,
>> as adv7511_cec_adap_enable() may enable some interrupts for CEC.
>>
>> This is a bit complicated.  Thoughts?
> 
> Send a revert and do it properly?

Good idea.  Adam, can you do that?


More information about the dri-devel mailing list