[PATCH v4 02/10] drm/bridge: add common api for inno hdmi
Alex Bee
knaerzche at gmail.com
Tue May 21 15:36:43 UTC 2024
Hi Keith,
thanks a lot for working on this. See some general remarks below
Am 21.05.24 um 12:58 schrieb keith:
> Add INNO common api so that it can be used by vendor
> drivers which implement vendor specific extensions to Innosilicon HDMI.
>
> Signed-off-by: keith <keith.zhao at starfivetech.com>
> ---
> MAINTAINERS | 2 +
> drivers/gpu/drm/bridge/Kconfig | 2 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/innosilicon/Kconfig | 6 +
> drivers/gpu/drm/bridge/innosilicon/Makefile | 2 +
> .../gpu/drm/bridge/innosilicon/inno-hdmi.c | 587 ++++++++++++++++++
> .../gpu/drm/bridge/innosilicon/inno-hdmi.h | 97 +++
> include/drm/bridge/inno_hdmi.h | 69 ++
> 8 files changed, 766 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/innosilicon/Kconfig
> create mode 100644 drivers/gpu/drm/bridge/innosilicon/Makefile
> create mode 100644 drivers/gpu/drm/bridge/innosilicon/inno-hdmi.c
> create mode 100644 drivers/gpu/drm/bridge/innosilicon/inno-hdmi.h
> create mode 100644 include/drm/bridge/inno_hdmi.h
>
....
> + drm_encoder_helper_add(encoder, pdata->helper_private);
> +
> + hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
> +
> + drm_connector_helper_add(&hdmi->connector,
> + &inno_hdmi_connector_helper_funcs);
> +
> + drmm_connector_init(drm, &hdmi->connector,
> + &inno_hdmi_connector_funcs,
> + DRM_MODE_CONNECTOR_HDMIA,
> + hdmi->ddc);
> +
I really don't want to anticipate bridge maintainer's feedback, but new
bridge drivers must not contain connector creation. That must happen
somewhere else.
Also I'm neither seeing any drm_brige struct nor drm_bridge_funcs, which
are both essential for a bridge driver. I don't think moving a part of a
driver to .../drm/bridge/ makes it a bridge driver.
Regeards,
Alex
> + drm_connector_attach_encoder(&hdmi->connector, encoder);
> +
> + return 0;
> +}
> +
....
More information about the dri-devel
mailing list