[PATCH v15 21/29] drm/tests: Add RGB Quantization tests

[Maxime Ripard]

The previous commit added the infrastructure to the connector state to
track what RGB Quantization should be used in a given state for an HDMI
connector.

Let's add some kunit tests to make sure it works as expected.

Reviewed-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Maxime Ripard <mripard at kernel.org>
---
 drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c | 355 +++++++++++++++++++++
 1 file changed, 355 insertions(+)

diff --git a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
index ff9a882201eb..da5c3d9a80bb 100644
--- a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
+++ b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
@@ -353,10 +353,354 @@ static void drm_test_check_broadcast_rgb_crtc_mode_not_changed(struct kunit *tes
 	crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
 	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
 	KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
 }
 
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to auto with a mode that isn't the
+ * VIC-1 mode, we will get a limited RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_auto_cea_mode(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_atomic_state *state;
+	struct drm_display_mode *preferred;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB),
+						     8);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+	KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	KUNIT_ASSERT_EQ(test,
+			conn_state->hdmi.broadcast_rgb,
+			DRM_HDMI_BROADCAST_RGB_AUTO);
+
+	ret = drm_atomic_check_only(state);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_limited_range);
+}
+
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to auto with a VIC-1 mode, we will get
+ * a full RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_auto_cea_mode_vic_1(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_atomic_state *state;
+	struct drm_display_mode *mode;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB),
+						     8);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	drm = &priv->drm;
+	conn = &priv->connector;
+	KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	mode = drm_display_mode_from_cea_vic(drm, 1);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	KUNIT_ASSERT_EQ(test,
+			conn_state->hdmi.broadcast_rgb,
+			DRM_HDMI_BROADCAST_RGB_AUTO);
+
+	ret = drm_atomic_check_only(state);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_limited_range);
+}
+
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to full with a mode that isn't the
+ * VIC-1 mode, we will get a full RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_full_cea_mode(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_atomic_state *state;
+	struct drm_display_mode *preferred;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB),
+						     8);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+	KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_FULL;
+
+	ret = drm_atomic_check_only(state);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	KUNIT_ASSERT_EQ(test,
+			conn_state->hdmi.broadcast_rgb,
+			DRM_HDMI_BROADCAST_RGB_FULL);
+
+	KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_limited_range);
+}
+
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to full with a VIC-1 mode, we will get
+ * a full RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_full_cea_mode_vic_1(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_atomic_state *state;
+	struct drm_display_mode *mode;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB),
+						     8);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	drm = &priv->drm;
+	conn = &priv->connector;
+	KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	mode = drm_display_mode_from_cea_vic(drm, 1);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_FULL;
+
+	ret = drm_atomic_check_only(state);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	KUNIT_ASSERT_EQ(test,
+			conn_state->hdmi.broadcast_rgb,
+			DRM_HDMI_BROADCAST_RGB_FULL);
+
+	KUNIT_EXPECT_FALSE(test, conn_state->hdmi.is_limited_range);
+}
+
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to limited with a mode that isn't the
+ * VIC-1 mode, we will get a limited RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_limited_cea_mode(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_atomic_state *state;
+	struct drm_display_mode *preferred;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB),
+						     8);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+	KUNIT_ASSERT_NE(test, drm_match_cea_mode(preferred), 1);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_LIMITED;
+
+	ret = drm_atomic_check_only(state);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	KUNIT_ASSERT_EQ(test,
+			conn_state->hdmi.broadcast_rgb,
+			DRM_HDMI_BROADCAST_RGB_LIMITED);
+
+	KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_limited_range);
+}
+
+/*
+ * Test that for an HDMI connector, with an HDMI monitor, if the
+ * Broadcast RGB property is set to limited with a VIC-1 mode, we will
+ * get a limited RGB Quantization Range.
+ */
+static void drm_test_check_broadcast_rgb_limited_cea_mode_vic_1(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *conn_state;
+	struct drm_atomic_state *state;
+	struct drm_display_mode *mode;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test,
+						     BIT(HDMI_COLORSPACE_RGB),
+						     8);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	drm = &priv->drm;
+	conn = &priv->connector;
+	KUNIT_ASSERT_TRUE(test, conn->display_info.is_hdmi);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	mode = drm_display_mode_from_cea_vic(drm, 1);
+	KUNIT_ASSERT_NOT_NULL(test, mode);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, mode, ctx);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	conn_state->hdmi.broadcast_rgb = DRM_HDMI_BROADCAST_RGB_LIMITED;
+
+	ret = drm_atomic_check_only(state);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	KUNIT_ASSERT_EQ(test,
+			conn_state->hdmi.broadcast_rgb,
+			DRM_HDMI_BROADCAST_RGB_LIMITED);
+
+	KUNIT_EXPECT_TRUE(test, conn_state->hdmi.is_limited_range);
+}
+
 /*
  * Test that if we change the maximum bpc property to a different value,
  * we trigger a mode change on the connector's CRTC, which will in turn
  * disable/enable the connector.
  */
@@ -1192,10 +1536,21 @@ static void drm_test_check_output_bpc_format_display_8bpc_only(struct kunit *tes
 	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 8);
 	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_format, HDMI_COLORSPACE_RGB);
 }
 
 static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
+	KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode),
+	KUNIT_CASE(drm_test_check_broadcast_rgb_auto_cea_mode_vic_1),
+	KUNIT_CASE(drm_test_check_broadcast_rgb_full_cea_mode),
+	KUNIT_CASE(drm_test_check_broadcast_rgb_full_cea_mode_vic_1),
+	KUNIT_CASE(drm_test_check_broadcast_rgb_limited_cea_mode),
+	KUNIT_CASE(drm_test_check_broadcast_rgb_limited_cea_mode_vic_1),
+	/*
+	 * TODO: When we'll have YUV output support, we need to check
+	 * that the limited range is always set to limited no matter
+	 * what the value of Broadcast RGB is.
+	 */
 	KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_changed),
 	KUNIT_CASE(drm_test_check_broadcast_rgb_crtc_mode_not_changed),
 	KUNIT_CASE(drm_test_check_hdmi_funcs_reject_rate),
 	KUNIT_CASE(drm_test_check_max_tmds_rate_bpc_fallback),
 	KUNIT_CASE(drm_test_check_max_tmds_rate_format_fallback),

-- 
2.45.0