[PATCH v2] drm/i915: Increase FLR timeout from 3s to 9s

[Rodrigo Vivi]

On Mon, May 27, 2024 at 04:00:25PM +0100, Andi Shyti wrote:
> On Mon, May 27, 2024 at 11:47:49AM +0100, Andi Shyti wrote:
> > On Fri, May 24, 2024 at 10:07:44AM -0400, Rodrigo Vivi wrote:
> > > On Fri, May 24, 2024 at 01:58:53AM +0200, Andi Shyti wrote:
> > > > Following the guidelines it takes 3 seconds to perform an FLR
> > > > reset. Let's give it a bit more slack because this time can
> > > > change depending on the platform and on the firmware
> > > 
> > > But did we see any issue with that?
> > 
> > yes, we have some FLR expiration timeouts that apparently are not
> > able to bring up the device and the memory is not accessible
> > anymore. It's worth giving it a bit more time.
> > 
> > > if that changes per platform and per firmware, shouldn't it all
> > > be explicit in the spec as well?
> > 
> > Is it always documented? We might anyway die after the FLR reset
> > failure, so that I see it quite safe to wait and pray a little
> > more.
> 
> if needed I can improve the log with the dmesg error print.

very good points indeed. I believe it would be worth some mentions
about the faced issues and good idea about dmesg as well. but up to you.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>

> 
> Andi