[PATCH v6 3/6] drm/display: Add missing aux less alpm wake related bits

[Nautiyal, Ankit K]

On 5/27/2024 1:56 PM, Animesh Manna wrote:
> From: Jouni Högander <jouni.hogander at intel.com>
>
> eDP1.5 adds some more bits into DP_RECEIVER_ALPM_CAP and
> DP_RECEIVER_ALPM_CONFIG registers. Add definitions for these.
>
> Signed-off-by: Jouni Högander <jouni.hogander at intel.com>
> ---
>   include/drm/display/drm_dp.h | 5 ++++-
>   1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/include/drm/display/drm_dp.h b/include/drm/display/drm_dp.h
> index 906949ca3cee..3317ff88ed59 100644
> --- a/include/drm/display/drm_dp.h
> +++ b/include/drm/display/drm_dp.h
> @@ -232,6 +232,8 @@
>   
>   #define DP_RECEIVER_ALPM_CAP		    0x02e   /* eDP 1.4 */
>   # define DP_ALPM_CAP			    (1 << 0)
> +# define DP_ALPM_PM_STATE_2A_SUPPORT	    (1 << 1) /* eDP 1.5 */
> +# define DP_ALPM_AUX_LESS_CAP		    (1 << 2) /* eDP 1.5 */

This bit seems to be derived from DP 2.1.

As per eDP1.5: Only bits [1 and 0] are eDP-specific. The register’s 
other bits are defined in DP Standard.

In any case, patch looks good to me.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>


Regards,

Ankit

>   
>   #define DP_SINK_DEVICE_AUX_FRAME_SYNC_CAP   0x02f   /* eDP 1.4 */
>   # define DP_AUX_FRAME_SYNC_CAP		    (1 << 0)
> @@ -683,7 +685,8 @@
>   
>   #define DP_RECEIVER_ALPM_CONFIG		    0x116   /* eDP 1.4 */
>   # define DP_ALPM_ENABLE			    (1 << 0)
> -# define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE  (1 << 1)
> +# define DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE  (1 << 1) /* eDP 1.5 */
> +# define DP_ALPM_MODE_AUX_LESS		    (1 << 2) /* eDP 1.5 */
>   
>   #define DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF  0x117   /* eDP 1.4 */
>   # define DP_AUX_FRAME_SYNC_ENABLE	    (1 << 0)