[PATCH 0/7] drm/msm/dpu: handle non-default TE source pins

[Abhinav Kumar]

On 5/22/2024 12:59 PM, Dmitry Baryshkov wrote:
> On Wed, 22 May 2024 at 21:39, Abhinav Kumar <quic_abhinavk at quicinc.com> wrote:
>>
>>
>>
>> On 5/20/2024 5:12 AM, Dmitry Baryshkov wrote:
>>> Command-mode DSI panels need to signal the display controlller when
>>> vsync happens, so that the device can start sending the next frame. Some
>>> devices (Google Pixel 3) use a non-default pin, so additional
>>> configuration is required. Add a way to specify this information in DT
>>> and handle it in the DSI and DPU drivers.
>>>
>>
>> Which pin is the pixel 3 using? Just wanted to know .. is it gpio0 or gpio1?
> 
> gpio2. If it was gpio0 then there were no issues at all.
> 

Got it. Instead of asking gpio1 or gpio2, I mistyped and asked gpio0 or 
gpio1.

While reviewing the code , I think the function 
dpu_hw_setup_vsync_source is poorly named . It really doesnt configured 
vsync_source. It actually configured watchdog timer.

Can you pls include one more patch in this series to rename 
dpu_hw_setup_vsync_source ---> dpu_hw_setup_wd_timer()

>>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
>>> ---
>>> Dmitry Baryshkov (7):
>>>         dt-bindings: display/msm/dsi: allow specifying TE source
>>>         drm/msm/dpu: convert vsync source defines to the enum
>>>         drm/msm/dsi: drop unused GPIOs handling
>>>         drm/msm/dpu: pull the is_cmd_mode out of _dpu_encoder_update_vsync_source()
>>>         drm/msm/dpu: rework vsync_source handling
>>>         drm/msm/dsi: parse vsync source from device tree
>>>         drm/msm/dpu: support setting the TE source
>>>
>>>    .../bindings/display/msm/dsi-controller-main.yaml  | 16 ++++++++
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c        | 11 ++---
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.h        |  5 +--
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c        |  2 +-
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h        |  2 +-
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h        | 26 ++++++------
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_hw_top.h         |  2 +-
>>>    drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c            | 44 ++++++++++++++++++++
>>>    drivers/gpu/drm/msm/dsi/dsi.h                      |  1 +
>>>    drivers/gpu/drm/msm/dsi/dsi_host.c                 | 48 +++++-----------------
>>>    drivers/gpu/drm/msm/dsi/dsi_manager.c              |  5 +++
>>>    drivers/gpu/drm/msm/msm_drv.h                      |  6 +++
>>>    12 files changed, 106 insertions(+), 62 deletions(-)
>>> ---
>>> base-commit: 75fa778d74b786a1608d55d655d42b480a6fa8bd
>>> change-id: 20240514-dpu-handle-te-signal-82663c0211bd
>>>
>>> Best regards,
> 
> 
>