[PATCH v3 1/2] dt-bindings: display: panel: Add WL-355608-A8 panel
Ryan Walklin
ryan at testtoast.com
Thu May 30 21:12:14 UTC 2024
The WL-355608-A8 is a 3.5" 640x480 at 60Hz RGB LCD display used in a
number of handheld gaming devices made by Anbernic. By consensus a
vendor prefix is not provided as the panel OEM is unknown.
Add a device tree binding for the panel.
Signed-off-by: Ryan Walklin <ryan at testtoast.com>
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
---
Changelog v1..v2:
- Correct compatible string and filename
- Note #dri-devel discussion regarding vendor prefix
- Remove unnecessary node names, spi-gpio compatible string and GPIOs from example
Changelog v2..v3:
- Remove errant tab and un-needed spi node label from example
- Add Reviewed-by tag
---
.../bindings/display/panel/wl-355608-a8.yaml | 60 +++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml b/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml
new file mode 100644
index 0000000000..e552d01b52
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/wl-355608-a8.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: WL-355608-A8 3.5" (640x480 pixels) 24-bit IPS LCD panel
+
+maintainers:
+ - Ryan Walklin <ryan at testtoast.com>
+
+allOf:
+ - $ref: panel-common.yaml#
+ - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: wl-355608-a8
+
+ reg:
+ maxItems: 1
+
+ spi-3wire: true
+
+required:
+ - compatible
+ - reg
+ - port
+ - power-supply
+ - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ spi {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ panel at 0 {
+ compatible = "wl-355608-a8";
+ reg = <0>;
+
+ spi-3wire;
+ spi-max-frequency = <3125000>;
+
+ reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14
+
+ backlight = <&backlight>;
+ power-supply = <®_lcd>;
+
+ port {
+ endpoint {
+ remote-endpoint = <&tcon_lcd0_out_lcd>;
+ };
+ };
+ };
+ };
--
2.45.1
More information about the dri-devel
mailing list