[PATCH] drm/bridge: tc358767: Check if fully initialized before signalling HPD event via IRQ

[Marek Vasut]

Make sure the connector is fully initialized before signalling any
HPD events via drm_kms_helper_hotplug_event(), otherwise this may
lead to NULL pointer dereference.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Andrzej Hajda <andrzej.hajda at intel.com>
Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: David Airlie <airlied at gmail.com>
Cc: Jernej Skrabec <jernej.skrabec at gmail.com>
Cc: Jonas Karlman <jonas at kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
Cc: Lucas Stach <l.stach at pengutronix.de>
Cc: Maarten Lankhorst <maarten.lankhorst at linux.intel.com>
Cc: Maxime Ripard <mripard at kernel.org>
Cc: Neil Armstrong <neil.armstrong at linaro.org>
Cc: Robert Foss <rfoss at kernel.org>
Cc: Thomas Zimmermann <tzimmermann at suse.de>
Cc: dri-devel at lists.freedesktop.org
Cc: kernel at dh-electronics.com
---
 drivers/gpu/drm/bridge/tc358767.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c
index eab3a529e8c4f..029002938a5e8 100644
--- a/drivers/gpu/drm/bridge/tc358767.c
+++ b/drivers/gpu/drm/bridge/tc358767.c
@@ -2217,7 +2217,7 @@ static irqreturn_t tc_irq_handler(int irq, void *arg)
 		dev_err(tc->dev, "syserr %x\n", stat);
 	}
 
-	if (tc->hpd_pin >= 0 && tc->bridge.dev) {
+	if (tc->hpd_pin >= 0 && tc->bridge.dev && tc->aux.drm_dev) {
 		/*
 		 * H is triggered when the GPIO goes high.
 		 *
-- 
2.43.0