[PATCH v7 07/10] drm/bridge: it6505: fix HDCP CTS KSV list read with UNIGRAF DPR-100.
Hermes Wu via B4 Relay
devnull+Hermes.wu.ite.com.tw at kernel.org
Mon Nov 4 06:43:37 UTC 2024
From: Hermes Wu <Hermes.wu at ite.com.tw>
When running the HDCP CTS test with UNIGRAF DPR-100.
KSV list must be read from DP_AUX_HDCP_KSV_FIFO in an AUX request,
and can not separate with multiple read requests.
The AUX operation command "CMD_AUX_GET_KSV_LIST" reads the KSV list
with AUX FIFO and is able to read DP_AUX_HDCP_KSV_FIFO in an AUX request.
Add it6505_get_ksvlist() which uses CMD_AUX_GET_KSV_LIST operation
to read the KSV list.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
Signed-off-by: Hermes Wu <hermes.wu at ite.com.tw>
---
drivers/gpu/drm/bridge/ite-it6505.c | 48 +++++++++++++++++++++++++++----------
1 file changed, 36 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/bridge/ite-it6505.c b/drivers/gpu/drm/bridge/ite-it6505.c
index 614fbb6295237708aa5b692de87ab5548c499da5..4ed4899227602a4574a13ffa22442dcc4a5c2092 100644
--- a/drivers/gpu/drm/bridge/ite-it6505.c
+++ b/drivers/gpu/drm/bridge/ite-it6505.c
@@ -1189,6 +1189,37 @@ static int it6505_get_edid_block(void *data, u8 *buf, unsigned int block,
return 0;
}
+static int it6505_get_ksvlist(struct it6505 *it6505, u8 *buf, size_t len)
+{
+ struct device *dev = it6505->dev;
+ enum aux_cmd_reply reply;
+ int request_size, ret;
+ int i = 0;
+
+ do {
+ request_size = min_t(int, (int)len - i, 15);
+
+ ret = it6505_aux_do_transfer(it6505, CMD_AUX_GET_KSV_LIST,
+ DP_AUX_HDCP_KSV_FIFO,
+ buf + i, request_size, &reply);
+
+ DRM_DEV_DEBUG_DRIVER(dev, "request_size = %d, ret =%d", request_size, ret);
+ if (ret < 0)
+ return ret;
+
+ i += request_size;
+ } while (i < len);
+
+ DRM_DEV_DEBUG_DRIVER(dev, "ksv read cnt = %d down_stream_cnt=%d ", i, i / 5);
+
+ for (i = 0 ; i < len; i += 5) {
+ DRM_DEV_DEBUG_DRIVER(dev, "ksv[%d] = %02X%02X%02X%02X%02X",
+ i / 5, buf[i], buf[i + 1], buf[i + 2], buf[i + 3], buf[i + 4]);
+ }
+
+ return len;
+}
+
static void it6505_variable_config(struct it6505 *it6505)
{
it6505->link_rate_bw_code = HBR;
@@ -1970,7 +2001,7 @@ static int it6505_setup_sha1_input(struct it6505 *it6505, u8 *sha1_input)
{
struct device *dev = it6505->dev;
u8 binfo[2];
- int down_stream_count, i, err, msg_count = 0;
+ int down_stream_count, err, msg_count = 0;
err = it6505_get_dpcd(it6505, DP_AUX_HDCP_BINFO, binfo,
ARRAY_SIZE(binfo));
@@ -1995,18 +2026,11 @@ static int it6505_setup_sha1_input(struct it6505 *it6505, u8 *sha1_input)
down_stream_count);
return 0;
}
+ err = it6505_get_ksvlist(it6505, sha1_input, down_stream_count * 5);
+ if (err < 0)
+ return err;
- for (i = 0; i < down_stream_count; i++) {
- err = it6505_get_dpcd(it6505, DP_AUX_HDCP_KSV_FIFO +
- (i % 3) * DRM_HDCP_KSV_LEN,
- sha1_input + msg_count,
- DRM_HDCP_KSV_LEN);
-
- if (err < 0)
- return err;
-
- msg_count += 5;
- }
+ msg_count += down_stream_count * 5;
it6505->hdcp_down_stream_count = down_stream_count;
sha1_input[msg_count++] = binfo[0];
--
2.34.1
More information about the dri-devel
mailing list