[PATCH RFC 1/3] drm/msm/adreno: Add support for ACD

neil.armstrong at linaro.org neil.armstrong at linaro.org
Thu Nov 7 08:55:53 UTC 2024


On 06/11/2024 02:44, Akhil P Oommen wrote:
> On 11/4/2024 9:14 PM, neil.armstrong at linaro.org wrote:
>> On 11/10/2024 22:29, Akhil P Oommen wrote:
>>> ACD a.k.a Adaptive Clock Distribution is a feature which helps to reduce
>>> the power consumption. In some chipsets, it is also a requirement to
>>> support higher GPU frequencies. This patch adds support for GPU ACD by
>>> sending necessary data to GMU and AOSS. The feature support for the
>>> chipset is detected based on devicetree data.
>>>
>>> Signed-off-by: Akhil P Oommen <quic_akhilpo at quicinc.com>
>>> ---
>>>    drivers/gpu/drm/msm/adreno/a6xx_gmu.c | 81 +++++++++++++++++++++++++
>>> +++-------
>>>    drivers/gpu/drm/msm/adreno/a6xx_gmu.h |  1 +
>>>    drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 36 ++++++++++++++++
>>>    drivers/gpu/drm/msm/adreno/a6xx_hfi.h | 21 +++++++++
>>>    4 files changed, 124 insertions(+), 15 deletions(-)
>>>
>>
>> <snip>
>>
>>> +
>>> +static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu)
>>> +{
>>> +    struct a6xx_hfi_acd_table *acd_table = &gmu->acd_table;
>>> +    struct a6xx_hfi_msg_feature_ctrl msg = {
>>> +        .feature = HFI_FEATURE_ACD,
>>> +        .enable = 1,
>>> +        .data = 0,
>>> +    };
>>> +    int ret;
>>> +
>>> +    if (!acd_table->enable_by_level)
>>> +        return 0;
>>> +
>>> +    /* Enable ACD feature at GMU */
>>> +    ret = a6xx_hfi_send_msg(gmu, HFI_H2F_FEATURE_CTRL, &msg,
>>> sizeof(msg), NULL, 0);
>>> +    if (ret) {
>>> +        DRM_DEV_ERROR(gmu->dev, "Unable to enable ACD (%d)\n", ret);
>>> +        return ret;
>>> +    }
>>> +
>>> +    /* Send ACD table to GMU */
>>> +    ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &msg, sizeof(msg),
>>> NULL, 0);
>>
>> This looks wrong, in this exact code, you never use the acd_table...
>> perhaps it should be acd_table here
> 
> Whoops! Weirdly gmu didn't explode when I tested.
> 
> Thanks for your keen eye.

You're welcome !

I've been trying to enable this on SM8650, but HFI_H2F_MSG_ACD fails.

My changes:
================><================================
diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
index 7c96d6f8aaa9..bd9d586f245e 100644
--- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
+++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
@@ -682,7 +682,7 @@ static int a6xx_hfi_enable_acd(struct a6xx_gmu *gmu)
         }

         /* Send ACD table to GMU */
-       ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &acd_table, sizeof(*acd_table), NULL, 0);
+       ret = a6xx_hfi_send_msg(gmu, HFI_H2F_MSG_ACD, &acd_table, sizeof(struct a6xx_hfi_acd_table), NULL, 0);
         if (ret) {
                 DRM_DEV_ERROR(gmu->dev, "Unable to send ACD table (%d)\n", ret);
                 return ret;
================><================================

with the appropriate qcom,opp-acd-level in DT taken from downstream, I get:
[    6.946184] platform 3d6a000.gmu: [drm:a6xx_hfi_send_msg.constprop.0 [msm]] *ERROR* Message (null) id 4 timed out waiting for response
[    6.958697] platform 3d6a000.gmu: [drm:a6xx_hfi_start [msm]] *ERROR* Unable to send ACD table (-110)

is there something missing ?

Neil

> 
> -Akhil.
> 
>>
>>> +    if (ret) {
>>> +        DRM_DEV_ERROR(gmu->dev, "Unable to ACD table (%d)\n", ret);
>>> +        return ret;
>>> +    }
>>> +
>>> +    return 0;
>>> +}
>>> +
>>>    static int a6xx_hfi_send_test(struct a6xx_gmu *gmu)
>>>    {
>>>        struct a6xx_hfi_msg_test msg = { 0 };
>>> @@ -756,6 +788,10 @@ int a6xx_hfi_start(struct a6xx_gmu *gmu, int
>>> boot_state)
>>>        if (ret)
>>>            return ret;
>>>    +    ret = a6xx_hfi_enable_acd(gmu);
>>> +    if (ret)
>>> +        return ret;
>>> +
>>>        ret = a6xx_hfi_send_core_fw_start(gmu);
>>>        if (ret)
>>>            return ret;
>>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h b/drivers/gpu/drm/
>>> msm/adreno/a6xx_hfi.h
>>> index 528110169398..51864c8ad0e6 100644
>>> --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.h
>>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.h
>>> @@ -151,12 +151,33 @@ struct a6xx_hfi_msg_test {
>>>        u32 header;
>>>    };
>>>    +#define HFI_H2F_MSG_ACD 7
>>> +#define MAX_ACD_STRIDE 2
>>> +
>>> +struct a6xx_hfi_acd_table {
>>> +    u32 header;
>>> +    u32 version;
>>> +    u32 enable_by_level;
>>> +    u32 stride;
>>> +    u32 num_levels;
>>> +    u32 data[16 * MAX_ACD_STRIDE];
>>> +};
>>> +
>>>    #define HFI_H2F_MSG_START 10
>>>      struct a6xx_hfi_msg_start {
>>>        u32 header;
>>>    };
>>>    +#define HFI_H2F_FEATURE_CTRL 11
>>> +
>>> +struct a6xx_hfi_msg_feature_ctrl {
>>> +    u32 header;
>>> +    u32 feature;
>>> +    u32 enable;
>>> +    u32 data;
>>> +};
>>> +
>>>    #define HFI_H2F_MSG_CORE_FW_START 14
>>>      struct a6xx_hfi_msg_core_fw_start {
>>>
>>
>> Thanks,
>> Neil
> 



More information about the dri-devel mailing list