[PATCH v2] drm/etnaviv: add optional reset support
LECOINTRE Philippe
philippe.lecointre at thalesgroup.com
Fri Nov 8 14:00:03 UTC 2024
Add optional reset support which is mentioned in vivante,gc.yaml to
allow the driver to work on SoCs whose reset signal is asserted by default
Avoid enabling the interrupt until everything is ready
Signed-off-by: Philippe Lecointre <philippe.lecointre at thalesgroup.com>
Reviewed-by: Simon Lenain <simon.lenain at thalesgroup.com>
---
v2:
- Add missing include of irq.h
---
drivers/gpu/drm/etnaviv/etnaviv_gpu.c | 30 +++++++++++++++++++++++++++
drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 2 ++
2 files changed, 32 insertions(+)
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
index 7c7f97793ddd..3e0c5dd9f74b 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2015-2018 Etnaviv Project
+ * Copyright (C) 2024 Thales
*/
#include <linux/clk.h>
@@ -8,11 +9,13 @@
#include <linux/delay.h>
#include <linux/dma-fence.h>
#include <linux/dma-mapping.h>
+#include <linux/irq.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
#include <linux/thermal.h>
#include "etnaviv_cmdbuf.h"
@@ -1629,8 +1632,24 @@ static int etnaviv_gpu_clk_enable(struct etnaviv_gpu *gpu)
if (ret)
goto disable_clk_core;
+ /* 32 core clock cycles (slowest clock) required before deassertion. */
+ /* 1 microsecond might match all implementations */
+ usleep_range(1, 2);
+
+ ret = reset_control_deassert(gpu->rst);
+ if (ret)
+ goto disable_clk_shader;
+
+ /* 128 core clock cycles (slowest clock) required before any activity on AHB. */
+ /* 1 microsecond might match all implementations */
+ usleep_range(1, 2);
+
+ enable_irq(gpu->irq);
+
return 0;
+disable_clk_shader:
+ clk_disable_unprepare(gpu->clk_shader);
disable_clk_core:
clk_disable_unprepare(gpu->clk_core);
disable_clk_bus:
@@ -1643,6 +1662,8 @@ static int etnaviv_gpu_clk_enable(struct etnaviv_gpu *gpu)
static int etnaviv_gpu_clk_disable(struct etnaviv_gpu *gpu)
{
+ disable_irq(gpu->irq);
+ reset_control_assert(gpu->rst);
clk_disable_unprepare(gpu->clk_shader);
clk_disable_unprepare(gpu->clk_core);
clk_disable_unprepare(gpu->clk_bus);
@@ -1876,6 +1897,9 @@ static int etnaviv_gpu_platform_probe(struct platform_device *pdev)
if (gpu->irq < 0)
return gpu->irq;
+ /* Avoid enabling the interrupt until everything is ready */
+ irq_set_status_flags(gpu->irq, IRQ_NOAUTOEN);
+
err = devm_request_irq(&pdev->dev, gpu->irq, irq_handler, 0,
dev_name(gpu->dev), gpu);
if (err) {
@@ -1883,6 +1907,12 @@ static int etnaviv_gpu_platform_probe(struct platform_device *pdev)
return err;
}
+ /* Get Reset: */
+ gpu->rst = devm_reset_control_get_optional(&pdev->dev, NULL);
+ if (IS_ERR(gpu->rst))
+ return dev_err_probe(dev, PTR_ERR(gpu->rst),
+ "failed to get reset\n");
+
/* Get Clocks: */
gpu->clk_reg = devm_clk_get_optional(&pdev->dev, "reg");
DBG("clk_reg: %p", gpu->clk_reg);
diff --git a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
index 31322195b9e4..8c181191755e 100644
--- a/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
+++ b/drivers/gpu/drm/etnaviv/etnaviv_gpu.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2015-2018 Etnaviv Project
+ * Copyright (C) 2024 Thales
*/
#ifndef __ETNAVIV_GPU_H__
@@ -157,6 +158,7 @@ struct etnaviv_gpu {
struct clk *clk_reg;
struct clk *clk_core;
struct clk *clk_shader;
+ struct reset_control *rst;
unsigned int freq_scale;
unsigned int fe_waitcycles;
--
2.19.1
More information about the dri-devel
mailing list