[RFC PATCH 6/6 6.6] libfs: fix infinite directory reads for offset dir
yangerkun
yangerkun at huaweicloud.com
Tue Nov 12 03:43:49 UTC 2024
在 2024/11/11 23:34, Chuck Lever III 写道:
>
>
>> On Nov 11, 2024, at 10:20 AM, yangerkun <yangerkun at huaweicloud.com> wrote:
>>
>>
>>
>> 在 2024/11/11 22:39, Chuck Lever III 写道:
>>>> On Nov 10, 2024, at 9:36 PM, Yu Kuai <yukuai1 at huaweicloud.com> wrote:
>>>>
>>>> Hi,
>>>>
>>>> 在 2024/11/11 8:52, cel at kernel.org 写道:
>>>>> From: yangerkun <yangerkun at huawei.com>
>>>>> [ Upstream commit 64a7ce76fb901bf9f9c36cf5d681328fc0fd4b5a ]
>>>>> After we switch tmpfs dir operations from simple_dir_operations to
>>>>> simple_offset_dir_operations, every rename happened will fill new dentry
>>>>> to dest dir's maple tree(&SHMEM_I(inode)->dir_offsets->mt) with a free
>>>>> key starting with octx->newx_offset, and then set newx_offset equals to
>>>>> free key + 1. This will lead to infinite readdir combine with rename
>>>>> happened at the same time, which fail generic/736 in xfstests(detail show
>>>>> as below).
>>>>> 1. create 5000 files(1 2 3...) under one dir
>>>>> 2. call readdir(man 3 readdir) once, and get one entry
>>>>> 3. rename(entry, "TEMPFILE"), then rename("TEMPFILE", entry)
>>>>> 4. loop 2~3, until readdir return nothing or we loop too many
>>>>> times(tmpfs break test with the second condition)
>>>>> We choose the same logic what commit 9b378f6ad48cf ("btrfs: fix infinite
>>>>> directory reads") to fix it, record the last_index when we open dir, and
>>>>> do not emit the entry which index >= last_index. The file->private_data
>>>>
>>>> Please notice this requires last_index should never overflow, otherwise
>>>> readdir will be messed up.
>>> It would help your cause if you could be more specific
>>> than "messed up".
>>>>> now used in offset dir can use directly to do this, and we also update
>>>>> the last_index when we llseek the dir file.
>>>>> Fixes: a2e459555c5f ("shmem: stable directory offsets")
>>>>> Signed-off-by: yangerkun <yangerkun at huawei.com>
>>>>> Link: https://lore.kernel.org/r/20240731043835.1828697-1-yangerkun@huawei.com
>>>>> Reviewed-by: Chuck Lever <chuck.lever at oracle.com>
>>>>> [brauner: only update last_index after seek when offset is zero like Jan suggested]
>>>>> Signed-off-by: Christian Brauner <brauner at kernel.org>
>>>>> Link: https://nvd.nist.gov/vuln/detail/CVE-2024-46701
>>>>> [ cel: adjusted to apply to origin/linux-6.6.y ]
>>>>> Signed-off-by: Chuck Lever <chuck.lever at oracle.com>
>>>>> ---
>>>>> fs/libfs.c | 37 +++++++++++++++++++++++++------------
>>>>> 1 file changed, 25 insertions(+), 12 deletions(-)
>>>>> diff --git a/fs/libfs.c b/fs/libfs.c
>>>>> index a87005c89534..b59ff0dfea1f 100644
>>>>> --- a/fs/libfs.c
>>>>> +++ b/fs/libfs.c
>>>>> @@ -449,6 +449,14 @@ void simple_offset_destroy(struct offset_ctx *octx)
>>>>> xa_destroy(&octx->xa);
>>>>> }
>>>>> +static int offset_dir_open(struct inode *inode, struct file *file)
>>>>> +{
>>>>> + struct offset_ctx *ctx = inode->i_op->get_offset_ctx(inode);
>>>>> +
>>>>> + file->private_data = (void *)ctx->next_offset;
>>>>> + return 0;
>>>>> +}
>>>>
>>>> Looks like xarray is still used.
>>> That's not going to change, as several folks have already
>>> explained.
>>>> I'm in the cc list ,so I assume you saw my set, then I don't know why
>>>> you're ignoring my concerns.
>>>> 1) next_offset is 32-bit and can overflow in a long-time running
>>>> machine.
>>>> 2) Once next_offset overflows, readdir will skip the files that offset
>>>> is bigger.
>>
>> I'm sorry, I'm a little busy these days, so I haven't responded to this
>> series of emails.
>>
>>> In that case, that entry won't be visible via getdents(3)
>>> until the directory is re-opened or the process does an
>>> lseek(fd, 0, SEEK_SET).
>>
>> Yes.
>>
>>> That is the proper and expected behavior. I suspect you
>>> will see exactly that behavior with ext4 and 32-bit
>>> directory offsets, for example.
>>
>> Emm...
>>
>> For this case like this:
>>
>> 1. mkdir /tmp/dir and touch /tmp/dir/file1 /tmp/dir/file2
>> 2. open /tmp/dir with fd1
>> 3. readdir and get /tmp/dir/file1
>> 4. rm /tmp/dir/file2
>> 5. touch /tmp/dir/file2
>> 4. loop 4~5 for 2^32 times
>> 5. readdir /tmp/dir with fd1
>>
>> For tmpfs now, we may see no /tmp/dir/file2, since the offset has been overflow, for ext4 it is ok... So we think this will be a problem.
>>
>>> Does that not directly address your concern? Or do you
>>> mean that Erkun's patch introduces a new issue?
>>
>> Yes, to be honest, my personal feeling is a problem. But for 64bit, it may never been trigger.
>
> Thanks for confirming.
>
> In that case, the preferred way to handle it is to fix
> the issue in upstream, and then backport that fix to LTS.
> Dependence on 64-bit offsets to avoid a failure case
> should be considered a workaround, not a real fix, IMHO.
Yes.
>
> Do you have a few moments to address it, or if not I
> will see to it.
You can try to do this, for the reason I am quite busy now until end of
this month... Sorry.
>
> I think reducing the xa_limit in simple_offset_add() to,
> say, 2..16 would make the reproducer fire almost
> immediately.
Yes.
>
>
>>> If there is a problem here, please construct a reproducer
>>> against this patch set and post it.
>>>> Thanks,
>>>> Kuai
>>>>
>>>>> +
>>>>> /**
>>>>> * offset_dir_llseek - Advance the read position of a directory descriptor
>>>>> * @file: an open directory whose position is to be updated
>>>>> @@ -462,6 +470,9 @@ void simple_offset_destroy(struct offset_ctx *octx)
>>>>> */
>>>>> static loff_t offset_dir_llseek(struct file *file, loff_t offset, int whence)
>>>>> {
>>>>> + struct inode *inode = file->f_inode;
>>>>> + struct offset_ctx *ctx = inode->i_op->get_offset_ctx(inode);
>>>>> +
>>>>> switch (whence) {
>>>>> case SEEK_CUR:
>>>>> offset += file->f_pos;
>>>>> @@ -475,8 +486,9 @@ static loff_t offset_dir_llseek(struct file *file, loff_t offset, int whence)
>>>>> }
>>>>> /* In this case, ->private_data is protected by f_pos_lock */
>>>>> - file->private_data = NULL;
>>>>> - return vfs_setpos(file, offset, U32_MAX);
>>>>> + if (!offset)
>>>>> + file->private_data = (void *)ctx->next_offset;
>>>>> + return vfs_setpos(file, offset, LONG_MAX);
>>>>> }
>>>>> static struct dentry *offset_find_next(struct xa_state *xas)
>>>>> @@ -505,7 +517,7 @@ static bool offset_dir_emit(struct dir_context *ctx, struct dentry *dentry)
>>>>> inode->i_ino, fs_umode_to_dtype(inode->i_mode));
>>>>> }
>>>>> -static void *offset_iterate_dir(struct inode *inode, struct dir_context *ctx)
>>>>> +static void offset_iterate_dir(struct inode *inode, struct dir_context *ctx, long last_index)
>>>>> {
>>>>> struct offset_ctx *so_ctx = inode->i_op->get_offset_ctx(inode);
>>>>> XA_STATE(xas, &so_ctx->xa, ctx->pos);
>>>>> @@ -514,17 +526,21 @@ static void *offset_iterate_dir(struct inode *inode, struct dir_context *ctx)
>>>>> while (true) {
>>>>> dentry = offset_find_next(&xas);
>>>>> if (!dentry)
>>>>> - return ERR_PTR(-ENOENT);
>>>>> + return;
>>>>> +
>>>>> + if (dentry2offset(dentry) >= last_index) {
>>>>> + dput(dentry);
>>>>> + return;
>>>>> + }
>>>>> if (!offset_dir_emit(ctx, dentry)) {
>>>>> dput(dentry);
>>>>> - break;
>>>>> + return;
>>>>> }
>>>>> dput(dentry);
>>>>> ctx->pos = xas.xa_index + 1;
>>>>> }
>>>>> - return NULL;
>>>>> }
>>>>> /**
>>>>> @@ -551,22 +567,19 @@ static void *offset_iterate_dir(struct inode *inode, struct dir_context *ctx)
>>>>> static int offset_readdir(struct file *file, struct dir_context *ctx)
>>>>> {
>>>>> struct dentry *dir = file->f_path.dentry;
>>>>> + long last_index = (long)file->private_data;
>>>>> lockdep_assert_held(&d_inode(dir)->i_rwsem);
>>>>> if (!dir_emit_dots(file, ctx))
>>>>> return 0;
>>>>> - /* In this case, ->private_data is protected by f_pos_lock */
>>>>> - if (ctx->pos == DIR_OFFSET_MIN)
>>>>> - file->private_data = NULL;
>>>>> - else if (file->private_data == ERR_PTR(-ENOENT))
>>>>> - return 0;
>>>>> - file->private_data = offset_iterate_dir(d_inode(dir), ctx);
>>>>> + offset_iterate_dir(d_inode(dir), ctx, last_index);
>>>>> return 0;
>>>>> }
>>>>> const struct file_operations simple_offset_dir_operations = {
>>>>> + .open = offset_dir_open,
>>>>> .llseek = offset_dir_llseek,
>>>>> .iterate_shared = offset_readdir,
>>>>> .read = generic_read_dir,
>>> --
>>> Chuck Lever
>
>
> --
> Chuck Lever
>
>
More information about the dri-devel
mailing list