[PATCH RFC 4/8] drm/msm: adreno: dynamically generate GMU bw table
Neil Armstrong
neil.armstrong at linaro.org
Fri Nov 15 09:11:09 UTC 2024
On 15/11/2024 08:24, Dmitry Baryshkov wrote:
> On Wed, Nov 13, 2024 at 04:48:30PM +0100, Neil Armstrong wrote:
>> The Adreno GPU Management Unit (GMU) can also scale the ddr
>> bandwidth along the frequency and power domain level, but for
>> now we statically fill the bw_table with values from the
>> downstream driver.
>>
>> Only the first entry is used, which is a disable vote, so we
>> currently rely on scaling via the linux interconnect paths.
>>
>> Let's dynamically generate the bw_table with the vote values
>> previously calculated from the OPPs.
>
> Nice to see this being worked upon. I hope the code can is generic
> enough so that we can use it from other adreno_foo_build_bw_table()
> functions.
I would hope so, but I don't have the HW to properly test it on those
platforms.
>
>>
>> Those entried will then be used by the GMU when passing the
>> appropriate bandwidth level when voting for a gpu frequency.
>>
>> Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
>> ---
>> drivers/gpu/drm/msm/adreno/a6xx_hfi.c | 48 +++++++++++++++++++++++++++--------
>> 1 file changed, 37 insertions(+), 11 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
>> index cb8844ed46b29c4569d05eb7a24f7b27e173190f..9a89ba95843e7805d78f0e5ddbe328677b6431dd 100644
>> --- a/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
>> +++ b/drivers/gpu/drm/msm/adreno/a6xx_hfi.c
>> @@ -596,22 +596,48 @@ static void a730_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
>> msg->cnoc_cmds_data[1][0] = 0x60000001;
>> }
>>
>> -static void a740_build_bw_table(struct a6xx_hfi_msg_bw_table *msg)
>> +static void a740_generate_bw_table(struct adreno_gpu *adreno_gpu, struct a6xx_gmu *gmu,
>> + struct a6xx_hfi_msg_bw_table *msg)
>> {
>> - msg->bw_level_num = 1;
>> + const struct a6xx_info *info = adreno_gpu->info->a6xx;
>> + unsigned int i, j;
>>
>> - msg->ddr_cmds_num = 3;
>> msg->ddr_wait_bitmask = 0x7;
>>
>> - msg->ddr_cmds_addrs[0] = cmd_db_read_addr("SH0");
>> - msg->ddr_cmds_addrs[1] = cmd_db_read_addr("MC0");
>> - msg->ddr_cmds_addrs[2] = cmd_db_read_addr("ACV");
>> + for (i = 0; i < 3; i++) {
>> + if (!info->bcm[i].name)
>> + break;
>> + msg->ddr_cmds_addrs[i] = cmd_db_read_addr(info->bcm[i].name);
>> + }
>> + msg->ddr_cmds_num = i;
>>
>> - msg->ddr_cmds_data[0][0] = 0x40000000;
>> - msg->ddr_cmds_data[0][1] = 0x40000000;
>> - msg->ddr_cmds_data[0][2] = 0x40000000;
>> + for (i = 0; i < gmu->nr_gpu_bws; ++i)
>> + for (j = 0; j < msg->ddr_cmds_num; j++)
>> + msg->ddr_cmds_data[i][j] = gmu->gpu_bw_votes[i][j];
>> + msg->bw_level_num = gmu->nr_gpu_bws;
>> +}
>> +
>> +static void a740_build_bw_table(struct adreno_gpu *adreno_gpu, struct a6xx_gmu *gmu,
>> + struct a6xx_hfi_msg_bw_table *msg)
>> +{
>> + if ((adreno_gpu->info->quirks & ADRENO_QUIRK_GMU_BW_VOTE) && gmu->nr_gpu_bws) {
>> + a740_generate_bw_table(adreno_gpu, gmu, msg);
>> + } else {
>
> Why do we need a fallback code here?
Because at this particular commit, it would generate an invalid table, I should probably remove the fallback at the end
>
>> + msg->bw_level_num = 1;
>>
>> - /* TODO: add a proper dvfs table */
>> + msg->ddr_cmds_num = 3;
>> + msg->ddr_wait_bitmask = 0x7;
>> +
>> + msg->ddr_cmds_addrs[0] = cmd_db_read_addr("SH0");
>> + msg->ddr_cmds_addrs[1] = cmd_db_read_addr("MC0");
>> + msg->ddr_cmds_addrs[2] = cmd_db_read_addr("ACV");
>> +
>> + msg->ddr_cmds_data[0][0] = 0x40000000;
>> + msg->ddr_cmds_data[0][1] = 0x40000000;
>> + msg->ddr_cmds_data[0][2] = 0x40000000;
>> +
>> + /* TODO: add a proper dvfs table */
>
> I think TODO is unapplicable anymore.
>
>> + }
>>
>> msg->cnoc_cmds_num = 1;
>> msg->cnoc_wait_bitmask = 0x1;
>> @@ -691,7 +717,7 @@ static int a6xx_hfi_send_bw_table(struct a6xx_gmu *gmu)
>> else if (adreno_is_a730(adreno_gpu))
>> a730_build_bw_table(msg);
>> else if (adreno_is_a740_family(adreno_gpu))
>> - a740_build_bw_table(msg);
>> + a740_build_bw_table(adreno_gpu, gmu, msg);
>> else
>> a6xx_build_bw_table(msg);
>>
>>
>> --
>> 2.34.1
>>
>
More information about the dri-devel
mailing list