[PATCH] drm/msm/dpu: fix x1e80100 intf_6 underrun/vsync interrupt

[Stephan Gerhold]

The IRQ indexes for the intf_6 underrun/vsync interrupts are swapped.
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16) is the actual underrun interrupt and
DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17) is the vsync interrupt.

This causes timeout errors when using the DP2 controller, e.g.
  [dpu error]enc37 frame done timeout
  *ERROR* irq timeout id=37, intf_mode=INTF_MODE_VIDEO intf=6 wb=-1, pp=2, intr=0
  *ERROR* wait disable failed: id:37 intf:6 ret:-110

Correct them to fix these errors and make DP2 work properly.

Cc: stable at vger.kernel.org
Fixes: e3b1f369db5a ("drm/msm/dpu: Add X1E80100 support")
Signed-off-by: Stephan Gerhold <stephan.gerhold at linaro.org>
---
 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h
index a3e60ac70689..d61895bb396f 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h
+++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h
@@ -389,8 +389,8 @@ static const struct dpu_intf_cfg x1e80100_intf[] = {
 		.type = INTF_DP,
 		.controller_id = MSM_DP_CONTROLLER_2,
 		.prog_fetch_lines_worst_case = 24,
-		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17),
-		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16),
+		.intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16),
+		.intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17),
 	}, {
 		.name = "intf_7", .id = INTF_7,
 		.base = 0x3b000, .len = 0x280,

---
base-commit: 744cf71b8bdfcdd77aaf58395e068b7457634b2c
change-id: 20241115-x1e80100-dp2-fix-beb12c6dcac9

Best regards,
-- 
Stephan Gerhold <stephan.gerhold at linaro.org>