[PATCH v3] drm/vkms: Remove index parameter from init_vkms_output
Maíra Canal
mcanal at igalia.com
Wed Nov 20 10:02:39 UTC 2024
On 19/11/24 10:56, Louis Chauvet wrote:
> On 19/11/24 - 14:34, Louis Chauvet wrote:
>> VKMS currently supports only one CRTC, so it make no sense to have this
>> index configurable. To avoid issues, replace this hardcoded index by
>> drm_crtc_mask when applicable.
>>
>> There is no need to manually set a crtc mask on primary and cursor plane
>> as it is automatically set by drmm_crtc_alloc_with_planes.
>>
>> In addition, this will remove the use of an uninitialized structure in
>> vkms_add_overlay_plane. This currently works by chance because two things:
>> - vkms_plane_init always set a possible_crtcs value, so the problematic
>> branch is never used;
>> - drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
>> always have this id.
>>
>> Signed-off-by: Louis Chauvet <louis.chauvet at bootlin.com>
>
> Hi Maíra, José,
>
> You told me "LGTM" for the v2, but without leaving a Acked/Reviewed-by,
> should I add them? Or maybe you prefer to formally send them now?
Reviewed-by: Maíra Canal <mcanal at igalia.com>
Best Regards,
- Maíra
>
> Thanks,
> Louis Chauvet
>
>> ---
>> Changes in v3:
>> - Rebased on drm-misc-next
>> - Link to v2: https://lore.kernel.org/r/20241010-vkms-remove-index-v2-1-6b8d6cfd5a15@bootlin.com
>>
>> Changes in v2:
>> - Applied comments from José
>> - Link to v1: https://lore.kernel.org/r/20240906-vkms-remove-index-v1-1-3cfedd8ccb2f@bootlin.com
>> ---
>> drivers/gpu/drm/vkms/vkms_drv.c | 2 +-
>> drivers/gpu/drm/vkms/vkms_drv.h | 8 ++-----
>> drivers/gpu/drm/vkms/vkms_output.c | 49 +++++++++++++-------------------------
>> drivers/gpu/drm/vkms/vkms_plane.c | 4 ++--
>> 4 files changed, 21 insertions(+), 42 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
>> index bab13943d8e0085bed85092d7bc8727d834768a9..e4ae69d9ef871c9ce436ad0bd8c6551d8fe7f55c 100644
>> --- a/drivers/gpu/drm/vkms/vkms_drv.c
>> +++ b/drivers/gpu/drm/vkms/vkms_drv.c
>> @@ -174,7 +174,7 @@ static int vkms_modeset_init(struct vkms_device *vkmsdev)
>> dev->mode_config.preferred_depth = 0;
>> dev->mode_config.helper_private = &vkms_mode_config_helpers;
>>
>> - return vkms_output_init(vkmsdev, 0);
>> + return vkms_output_init(vkmsdev);
>> }
>>
>> static int vkms_create(struct vkms_config *config)
>> diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
>> index 672fe191e239c03e7358d43eb19215361417a781..036101ee4ea1cb0a335cd2ea78a8ca9da87fbe93 100644
>> --- a/drivers/gpu/drm/vkms/vkms_drv.h
>> +++ b/drivers/gpu/drm/vkms/vkms_drv.h
>> @@ -212,21 +212,17 @@ int vkms_crtc_init(struct drm_device *dev, struct drm_crtc *crtc,
>> * vkms_output_init() - Initialize all sub-components needed for a VKMS device.
>> *
>> * @vkmsdev: VKMS device to initialize
>> - * @index: CRTC which can be attached to the planes. The caller must ensure that
>> - * @index is positive and less or equals to 31.
>> */
>> -int vkms_output_init(struct vkms_device *vkmsdev, int index);
>> +int vkms_output_init(struct vkms_device *vkmsdev);
>>
>> /**
>> * vkms_plane_init() - Initialize a plane
>> *
>> * @vkmsdev: VKMS device containing the plane
>> * @type: type of plane to initialize
>> - * @index: CRTC which can be attached to the plane. The caller must ensure that
>> - * @index is positive and less or equals to 31.
>> */
>> struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
>> - enum drm_plane_type type, int index);
>> + enum drm_plane_type type);
>>
>> /* CRC Support */
>> const char *const *vkms_get_crc_sources(struct drm_crtc *crtc,
>> diff --git a/drivers/gpu/drm/vkms/vkms_output.c b/drivers/gpu/drm/vkms/vkms_output.c
>> index 25a99fde126c7402941954015287ab0887484139..8f4bd5aef087b459d37d0cbbf90fe0145090917a 100644
>> --- a/drivers/gpu/drm/vkms/vkms_output.c
>> +++ b/drivers/gpu/drm/vkms/vkms_output.c
>> @@ -32,29 +32,14 @@ static const struct drm_connector_helper_funcs vkms_conn_helper_funcs = {
>> .get_modes = vkms_conn_get_modes,
>> };
>>
>> -static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
>> - struct drm_crtc *crtc)
>> -{
>> - struct vkms_plane *overlay;
>> -
>> - overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
>> - if (IS_ERR(overlay))
>> - return PTR_ERR(overlay);
>> -
>> - if (!overlay->base.possible_crtcs)
>> - overlay->base.possible_crtcs = drm_crtc_mask(crtc);
>> -
>> - return 0;
>> -}
>> -
>> -int vkms_output_init(struct vkms_device *vkmsdev, int index)
>> +int vkms_output_init(struct vkms_device *vkmsdev)
>> {
>> struct vkms_output *output = &vkmsdev->output;
>> struct drm_device *dev = &vkmsdev->drm;
>> struct drm_connector *connector = &output->connector;
>> struct drm_encoder *encoder = &output->encoder;
>> struct drm_crtc *crtc = &output->crtc;
>> - struct vkms_plane *primary, *cursor = NULL;
>> + struct vkms_plane *primary, *overlay, *cursor = NULL;
>> int ret;
>> int writeback;
>> unsigned int n;
>> @@ -65,29 +50,31 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
>> * The overlay and cursor planes are not mandatory, but can be used to perform complex
>> * composition.
>> */
>> - primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
>> + primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY);
>> if (IS_ERR(primary))
>> return PTR_ERR(primary);
>>
>> - if (vkmsdev->config->overlay) {
>> - for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
>> - ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
>> - if (ret)
>> - return ret;
>> - }
>> - }
>> -
>> if (vkmsdev->config->cursor) {
>> - cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
>> + cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR);
>> if (IS_ERR(cursor))
>> return PTR_ERR(cursor);
>> }
>>
>> - /* [1]: Allocation of a CRTC, its index will be BIT(0) = 1 */
>> ret = vkms_crtc_init(dev, crtc, &primary->base, &cursor->base);
>> if (ret)
>> return ret;
>>
>> + if (vkmsdev->config->overlay) {
>> + for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
>> + overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY);
>> + if (IS_ERR(overlay)) {
>> + DRM_DEV_ERROR(dev->dev, "Failed to init vkms plane\n");
>> + return PTR_ERR(overlay);
>> + }
>> + overlay->base.possible_crtcs = drm_crtc_mask(crtc);
>> + }
>> + }
>> +
>> ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
>> DRM_MODE_CONNECTOR_VIRTUAL);
>> if (ret) {
>> @@ -103,11 +90,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int index)
>> DRM_ERROR("Failed to init encoder\n");
>> goto err_encoder;
>> }
>> - /*
>> - * This is a hardcoded value to select crtc for the encoder.
>> - * BIT(0) here designate the first registered CRTC, the one allocated in [1]
>> - */
>> - encoder->possible_crtcs = BIT(0);
>> + encoder->possible_crtcs = drm_crtc_mask(crtc);
>>
>> ret = drm_connector_attach_encoder(connector, encoder);
>> if (ret) {
>> diff --git a/drivers/gpu/drm/vkms/vkms_plane.c b/drivers/gpu/drm/vkms/vkms_plane.c
>> index e5c625ab8e3e06cb95f468c59bc3b06ef85eab6f..ad137c9a75f5e9ee3bb62e7bb2c5e3684a6ecbb6 100644
>> --- a/drivers/gpu/drm/vkms/vkms_plane.c
>> +++ b/drivers/gpu/drm/vkms/vkms_plane.c
>> @@ -198,12 +198,12 @@ static const struct drm_plane_helper_funcs vkms_plane_helper_funcs = {
>> };
>>
>> struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
>> - enum drm_plane_type type, int index)
>> + enum drm_plane_type type)
>> {
>> struct drm_device *dev = &vkmsdev->drm;
>> struct vkms_plane *plane;
>>
>> - plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 << index,
>> + plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 0,
>> &vkms_plane_funcs,
>> vkms_formats, ARRAY_SIZE(vkms_formats),
>> NULL, type, NULL);
>>
>> ---
>> base-commit: 7d2faa8dbb7055a115fe0cd6068d7090094a573d
>> change-id: 20240906-vkms-remove-index-3a6e04c38e02
>>
>> Best regards,
>> --
>> Louis Chauvet <louis.chauvet at bootlin.com>
>>
More information about the dri-devel
mailing list