[PATCH v1 2/7] dt-bindings: display: mediatek: Add binding for MT8195 HDMI-TX v2

[Rob Herring (Arm)]

On Wed, 20 Nov 2024 13:45:07 +0100, AngeloGioacchino Del Regno wrote:
> Add a binding for the HDMI TX v2 Encoder found in MediaTek MT8195
> and MT8188 SoCs.
> 
> This fully supports the HDMI Specification 2.0b, hence it provides
> support for 3D-HDMI, Polarity inversion, up to 16 bits Deep Color,
> color spaces including RGB444, YCBCR420/422/444 (ITU601/ITU709) and
> xvYCC, with output resolutions up to 3840x2160p at 60Hz.
> 
> Moreover, it also supports HDCP 1.4 and 2.3, Variable Refresh Rate
> (VRR) and Consumer Electronics Control (CEC).
> 
> This IP also includes support for HDMI Audio, including IEC60958
> and IEC61937 SPDIF, 8-channel PCM, DSD, and other lossless audio
> according to HDMI 2.0.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> ---
>  .../mediatek/mediatek,mt8195-hdmi.yaml        | 150 ++++++++++++++++++
>  1 file changed, 150 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.example.dtb: hdmi-tx at 1c300000: Additional properties are not allowed ('#sound-dai-cells' was unexpected)
	from schema $id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241120124512.134278-3-angelogioacchino.delregno@collabora.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.