[PATCH 3/3] drm: atmel-hlcdc: set LVDS PLL clock rate for LVDS Displays

[Manikandan Muralidharan]

From: Dharma Balasubiramani <dharma.b at microchip.com>

The LVDS PLL clock is 7x the Panel Pixel clock.
When using LVDS displays, the LVDS PLL clock rate is set using the
panel pixel clock, this skips the usage of 'assigned-clock-rates'
DT property for lvds_pll_clk clock for LCD node.

Signed-off-by: Dharma Balasubiramani <dharma.b at microchip.com>
Signed-off-by: Manikandan Muralidharan <manikandan.m at microchip.com>
---
 .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c    | 48 ++++++++++++++++---
 1 file changed, 42 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
index 0e709047369a..d11040d5cc5f 100644
--- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
+++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
@@ -99,9 +99,15 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
 		drm_connector_list_iter_end(&iter);
 	}
 
-	ret = clk_prepare_enable(crtc->dc->hlcdc->sys_clk);
-	if (ret)
-		return;
+	if (crtc->dc->hlcdc->lvds_pll_clk) {
+		ret = clk_prepare_enable(crtc->dc->hlcdc->lvds_pll_clk);
+		if (ret)
+			return;
+	} else {
+		ret = clk_prepare_enable(crtc->dc->hlcdc->sys_clk);
+		if (ret)
+			return;
+	}
 
 	vm.vfront_porch = adj->crtc_vsync_start - adj->crtc_vdisplay;
 	vm.vback_porch = adj->crtc_vtotal - adj->crtc_vsync_end;
@@ -186,7 +192,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
 			   ATMEL_XLCDC_DPI : ATMEL_HLCDC_MODE_MASK),
 			   cfg);
 
-	clk_disable_unprepare(crtc->dc->hlcdc->sys_clk);
+	if (crtc->dc->hlcdc->lvds_pll_clk)
+		clk_disable_unprepare(crtc->dc->hlcdc->lvds_pll_clk);
+	else
+		clk_disable_unprepare(crtc->dc->hlcdc->sys_clk);
 }
 
 static enum drm_mode_status
@@ -242,7 +251,11 @@ static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c,
 				    10, 1000))
 		dev_warn(dev->dev, "Atmel LCDC status register CLKSTS timeout\n");
 
-	clk_disable_unprepare(crtc->dc->hlcdc->sys_clk);
+	if (crtc->dc->hlcdc->lvds_pll_clk)
+		clk_disable_unprepare(crtc->dc->hlcdc->lvds_pll_clk);
+	else
+		clk_disable_unprepare(crtc->dc->hlcdc->sys_clk);
+
 	pinctrl_pm_select_sleep_state(dev->dev);
 
 	pm_runtime_allow(dev->dev);
@@ -255,15 +268,38 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
 {
 	struct drm_device *dev = c->dev;
 	struct atmel_hlcdc_crtc *crtc = drm_crtc_to_atmel_hlcdc_crtc(c);
+	struct drm_display_mode *adj = &c->state->adjusted_mode;
 	struct regmap *regmap = crtc->dc->hlcdc->regmap;
 	unsigned int status;
+	int ret;
 
 	pm_runtime_get_sync(dev->dev);
 
 	pm_runtime_forbid(dev->dev);
 
 	pinctrl_pm_select_default_state(dev->dev);
-	clk_prepare_enable(crtc->dc->hlcdc->sys_clk);
+
+	if (crtc->dc->hlcdc->lvds_pll_clk) {
+		/*
+		 * When using LVDS displays, fetch the pixel clock from the panel
+		 * and set the LVDS PLL clock rate.
+		 * As per the datasheet, LVDS PLL clock is 7x the pixel clock.
+		 */
+		ret = clk_set_rate(crtc->dc->hlcdc->lvds_pll_clk,
+				   (adj->clock * 7 * 1000));
+		if (ret) {
+			dev_err(dev->dev, "Failed to set LVDS PLL clk rate: %d\n", ret);
+			return;
+		}
+
+		ret = clk_prepare_enable(crtc->dc->hlcdc->lvds_pll_clk);
+		if (ret)
+			return;
+	} else {
+		ret = clk_prepare_enable(crtc->dc->hlcdc->sys_clk);
+		if (ret)
+			return;
+	}
 
 	regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_HLCDC_PIXEL_CLK);
 	if (regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
-- 
2.25.1