[RFC 05/13] acpi/x86: s2idle: add modern standby transition function
Antheas Kapenekakis
lkml at antheas.dev
Thu Nov 21 17:22:30 UTC 2024
Add a new function to transition modern standby states and call it
as part of the suspend sequence to make sure it begins under the
Modern Standby "Sleep" state.
Signed-off-by: Antheas Kapenekakis <lkml at antheas.dev>
---
include/linux/suspend.h | 11 ++++
kernel/power/power.h | 1 +
kernel/power/suspend.c | 127 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 139 insertions(+)
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index 01ee64321cda..b8fe781d8026 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -40,6 +40,15 @@ typedef int __bitwise suspend_state_t;
#define PM_SUSPEND_MIN PM_SUSPEND_TO_IDLE
#define PM_SUSPEND_MAX ((__force suspend_state_t) 4)
+typedef int __bitwise standby_state_t;
+
+#define PM_STANDBY_ACTIVE ((__force standby_state_t) 0)
+#define PM_STANDBY_SCREEN_OFF ((__force standby_state_t) 1)
+#define PM_STANDBY_SLEEP ((__force standby_state_t) 2)
+#define PM_STANDBY_RESUME ((__force standby_state_t) 3)
+#define PM_STANDBY_MIN PM_STANDBY_ACTIVE
+#define PM_STANDBY_MAX ((__force standby_state_t) 4)
+
/**
* struct platform_suspend_ops - Callbacks for managing platform dependent
* system sleep states.
@@ -281,6 +290,8 @@ extern void arch_suspend_enable_irqs(void);
extern int pm_suspend(suspend_state_t state);
extern bool sync_on_suspend_enabled;
+extern int pm_standby_transition(standby_state_t state);
+extern int pm_standby_state(void);
#else /* !CONFIG_SUSPEND */
#define suspend_valid_only_mem NULL
diff --git a/kernel/power/power.h b/kernel/power/power.h
index de0e6b1077f2..4ee067cd0d4d 100644
--- a/kernel/power/power.h
+++ b/kernel/power/power.h
@@ -207,6 +207,7 @@ extern void swsusp_show_speed(ktime_t, ktime_t, unsigned int, char *);
extern const char * const pm_labels[];
extern const char *pm_states[];
extern const char *mem_sleep_states[];
+extern const char *standby_states[];
extern int suspend_devices_and_enter(suspend_state_t state);
#else /* !CONFIG_SUSPEND */
diff --git a/kernel/power/suspend.c b/kernel/power/suspend.c
index a42e8514ee7a..1865db71a0c2 100644
--- a/kernel/power/suspend.c
+++ b/kernel/power/suspend.c
@@ -45,12 +45,21 @@ static const char * const mem_sleep_labels[] = {
[PM_SUSPEND_MEM] = "deep",
};
const char *mem_sleep_states[PM_SUSPEND_MAX];
+static const char * const standby_labels[] = {
+ [PM_STANDBY_ACTIVE] = "active",
+ [PM_STANDBY_SCREEN_OFF] = "screen_off",
+ [PM_STANDBY_SLEEP] = "sleep",
+ [PM_STANDBY_RESUME] = "resume",
+};
+const char *standby_states[PM_STANDBY_MAX];
suspend_state_t mem_sleep_current = PM_SUSPEND_TO_IDLE;
suspend_state_t mem_sleep_default = PM_SUSPEND_MAX;
suspend_state_t pm_suspend_target_state;
EXPORT_SYMBOL_GPL(pm_suspend_target_state);
+standby_state_t standby_current = PM_STANDBY_ACTIVE;
+
unsigned int pm_suspend_global_flags;
EXPORT_SYMBOL_GPL(pm_suspend_global_flags);
@@ -188,6 +197,16 @@ void __init pm_states_init(void)
* initialize mem_sleep_states[] accordingly here.
*/
mem_sleep_states[PM_SUSPEND_TO_IDLE] = mem_sleep_labels[PM_SUSPEND_TO_IDLE];
+ /* All systems support the "active" state. */
+ standby_states[PM_STANDBY_ACTIVE] = standby_labels[PM_STANDBY_ACTIVE];
+ /*
+ * Not all systems support these states, where they will have increased
+ * power consumption. If deemed necessary, they should be gated to not
+ * mislead userspace.
+ */
+ standby_states[PM_STANDBY_SCREEN_OFF] = standby_labels[PM_STANDBY_SCREEN_OFF];
+ standby_states[PM_STANDBY_SLEEP] = standby_labels[PM_STANDBY_SLEEP];
+ standby_states[PM_STANDBY_RESUME] = standby_labels[PM_STANDBY_RESUME];
}
static int __init mem_sleep_default_setup(char *str)
@@ -354,6 +373,108 @@ static bool platform_suspend_again(suspend_state_t state)
suspend_ops->suspend_again() : false;
}
+static int platform_standby_transition_internal(standby_state_t state)
+{
+ int error;
+
+ if (state == standby_current)
+ return 0;
+ if (state > PM_STANDBY_MAX)
+ return -EINVAL;
+
+ pm_pr_dbg("Transitioning from standby state %s to %s\n",
+ standby_states[standby_current], standby_states[state]);
+
+ /* Resume can only be entered if we are on the sleep state. */
+ if (state == PM_STANDBY_RESUME) {
+ if (standby_current != PM_STANDBY_SLEEP)
+ return -EINVAL;
+ standby_current = PM_STANDBY_RESUME;
+ return platform_standby_turn_on_display();
+ }
+
+ /*
+ * The system should not be able to re-enter Sleep from resume as it
+ * is undefined behavior. As part of setting the state to "Resume",
+ * were promised a transition to "Screen Off" or "Active".
+ */
+ if (standby_current == PM_STANDBY_RESUME && state == PM_STANDBY_SLEEP)
+ return -EINVAL;
+
+ /* Resume is the Sleep state logic-wise. */
+ if (standby_current == PM_STANDBY_RESUME)
+ standby_current = PM_STANDBY_SLEEP;
+
+ if (standby_current < state) {
+ for (; standby_current < state; standby_current++) {
+ switch (standby_current + 1) {
+ case PM_STANDBY_SCREEN_OFF:
+ error = platform_standby_display_off();
+ break;
+ case PM_STANDBY_SLEEP:
+ error = platform_standby_sleep_entry();
+ break;
+ }
+
+ if (error)
+ return error;
+ }
+ } else if (standby_current > state) {
+ for (; standby_current > state; standby_current--) {
+ switch (standby_current) {
+ case PM_STANDBY_SLEEP:
+ error = platform_standby_sleep_exit();
+ break;
+ case PM_STANDBY_SCREEN_OFF:
+ error = platform_standby_display_on();
+ break;
+ }
+
+ if (error)
+ return error;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * pm_standby_transition - Transition between Modern Standby states
+ *
+ * Fires the appropriate firmware notifications to transition to the requested
+ * state. Returns an error if the transition fails. The function does not
+ * rollback. It is up to userspace to handle the error and re-transition when
+ * appropriate.
+ */
+int pm_standby_transition(standby_state_t state)
+{
+ unsigned int sleep_flags;
+ int error;
+
+ sleep_flags = lock_system_sleep();
+ error = platform_standby_transition_internal(state);
+ unlock_system_sleep(sleep_flags);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(pm_standby_transition);
+
+/**
+ * pm_standby_state - Returns the current standby state
+ */
+int pm_standby_state(void)
+{
+ unsigned int sleep_flags;
+ int state;
+
+ sleep_flags = lock_system_sleep();
+ state = standby_current;
+ unlock_system_sleep(sleep_flags);
+
+ return state;
+}
+EXPORT_SYMBOL_GPL(pm_standby_state);
+
#ifdef CONFIG_PM_DEBUG
static unsigned int pm_test_delay = 5;
module_param(pm_test_delay, uint, 0644);
@@ -586,6 +707,7 @@ static void suspend_finish(void)
static int enter_state(suspend_state_t state)
{
int error;
+ standby_state_t standby_prior;
trace_suspend_resume(TPS("suspend_enter"), state, true);
if (state == PM_SUSPEND_TO_IDLE) {
@@ -601,6 +723,9 @@ static int enter_state(suspend_state_t state)
if (!mutex_trylock(&system_transition_mutex))
return -EBUSY;
+ standby_prior = standby_current;
+ platform_standby_transition_internal(PM_STANDBY_SLEEP);
+
if (state == PM_SUSPEND_TO_IDLE)
s2idle_begin();
@@ -630,6 +755,8 @@ static int enter_state(suspend_state_t state)
pm_pr_dbg("Finishing wakeup.\n");
suspend_finish();
Unlock:
+ platform_standby_transition_internal(standby_prior);
+
mutex_unlock(&system_transition_mutex);
return error;
}
--
2.47.0
More information about the dri-devel
mailing list