[PATCH v5 drm-dp 3/5] drm/hisilicon/hibmc: add dp hw moduel in hibmc

Dmitry Baryshkov dmitry.baryshkov at linaro.org
Fri Nov 22 02:18:16 UTC 2024


On Mon, Nov 18, 2024 at 10:28:03PM +0800, Yongbang Shi wrote:
> From: baihan li <libaihan at huawei.com>
> 
> Build a dp level that hibmc driver can enable dp by
> calling their functions.
> 
> Signed-off-by: Baihan Li <libaihan at huawei.com>
> Signed-off-by: Yongbang Shi <shiyongbang at huawei.com>
> ---
> ChangeLog:
> v3 -> v4:
>   - changed the type of train_set to array, suggested by Dmitry Baryshkov.
>   - using actual link rate instead of magic num, suggested by Dmitry Baryshkov.
>   - deleting hibmc_dp_hw_uninit(), suggested by Dmitry Baryshkov.
> v2 -> v3:
>   - fix build errors reported by kernel test robot <lkp at intel.com>
>     Closes: https://lore.kernel.org/oe-kbuild-all/202410250931.UDQ9s66H-lkp@intel.com/
> v1 -> v2:
>   - changed some defines and functions to former patch, suggested by Dmitry Baryshkov.
>   - sorting the headers including in dp_hw.h and hibmc_drm_drv.c files, suggested by Dmitry Baryshkov.
>   - deleting struct dp_mode and dp_mode_cfg function, suggested by Dmitry Baryshkov.
>   - fix build errors reported by kernel test robot <lkp at intel.com>
>     Closes: https://lore.kernel.org/oe-kbuild-all/202410040328.VeVxM9yB-lkp@intel.com/
>   v1:https://lore.kernel.org/all/20240930100610.782363-1-shiyongbang@huawei.com/
> ---
>  drivers/gpu/drm/hisilicon/hibmc/Makefile      |   2 +-
>  .../gpu/drm/hisilicon/hibmc/dp/dp_config.h    |  19 ++
>  drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.c    | 217 ++++++++++++++++++
>  drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h    |  28 +++
>  drivers/gpu/drm/hisilicon/hibmc/dp/dp_reg.h   |  41 ++++
>  5 files changed, 306 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h
>  create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.c
>  create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h
> 
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
> index 94d77da88bbf..214228052ccf 100644
> --- a/drivers/gpu/drm/hisilicon/hibmc/Makefile
> +++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
> @@ -1,5 +1,5 @@
>  # SPDX-License-Identifier: GPL-2.0-only
>  hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_drm_i2c.o \
> -	       dp/dp_aux.o dp/dp_link.o
> +	       dp/dp_aux.o dp/dp_link.o dp/dp_hw.o
>  
>  obj-$(CONFIG_DRM_HISI_HIBMC) += hibmc-drm.o
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h
> new file mode 100644
> index 000000000000..74dd9956144e
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_config.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/* Copyright (c) 2024 Hisilicon Limited. */
> +
> +#ifndef DP_CONFIG_H
> +#define DP_CONFIG_H
> +
> +#define HIBMC_DP_BPP			24
> +#define HIBMC_DP_SYMBOL_PER_FCLK	4
> +#define HIBMC_DP_MSA1			0x20
> +#define HIBMC_DP_MSA2			0x845c00
> +#define HIBMC_DP_OFFSET			0x1e0000
> +#define HIBMC_DP_HDCP			0x2
> +#define HIBMC_DP_INT_RST		0xffff
> +#define HIBMC_DP_DPTX_RST		0x3ff
> +#define HIBMC_DP_CLK_EN			0x7
> +#define HIBMC_DP_SYNC_EN_MASK		0x3
> +#define HIBMC_DP_LINK_RATE_CAL		27
> +
> +#endif
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.c b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.c
> new file mode 100644
> index 000000000000..9d7337cd9309
> --- /dev/null
> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.c
> @@ -0,0 +1,217 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright (c) 2024 Hisilicon Limited.
> +
> +#include <linux/io.h>
> +#include <linux/delay.h>
> +#include "dp_config.h"
> +#include "dp_comm.h"
> +#include "dp_reg.h"
> +#include "dp_hw.h"
> +
> +static void hibmc_dp_set_tu(struct hibmc_dp_dev *dp, struct drm_display_mode *mode)
> +{
> +	u32 tu_symbol_frac_size;
> +	u32 tu_symbol_size;
> +	u32 rate_ks;
> +	u8 lane_num;
> +	u32 value;
> +	u32 bpp;
> +
> +	lane_num = dp->link.cap.lanes;
> +	if (lane_num == 0) {
> +		drm_err(dp->dev, "set tu failed, lane num cannot be 0!\n");
> +		return;
> +	}
> +
> +	bpp = HIBMC_DP_BPP;
> +	rate_ks = dp->link.cap.link_rate * HIBMC_DP_LINK_RATE_CAL;
> +	value = (mode->clock * bpp * 5) / (61 * lane_num * rate_ks);
> +
> +	if (value % 10 == 9) { /* 9 carry */
> +		tu_symbol_size = value / 10 + 1;
> +		tu_symbol_frac_size = 0;
> +	} else {
> +		tu_symbol_size = value / 10;
> +		tu_symbol_frac_size = value % 10 + 1;
> +	}
> +
> +	drm_info(dp->dev, "tu value: %u.%u value: %u\n",
> +		 tu_symbol_size, tu_symbol_frac_size, value);

drm_dbg_driver()

> +
> +	hibmc_dp_reg_write_field(dp, HIBMC_DP_VIDEO_PACKET,
> +				 HIBMC_DP_CFG_STREAM_TU_SYMBOL_SIZE, tu_symbol_size);
> +	hibmc_dp_reg_write_field(dp, HIBMC_DP_VIDEO_PACKET,
> +				 HIBMC_DP_CFG_STREAM_TU_SYMBOL_FRAC_SIZE, tu_symbol_frac_size);
> +}
> +
> +static void hibmc_dp_set_sst(struct hibmc_dp_dev *dp, struct drm_display_mode *mode)
> +{
> +	u32 hblank_size;
> +	u32 htotal_size;
> +	u32 htotal_int;
> +	u32 hblank_int;
> +	u32 fclk; /* flink_clock */
> +
> +	fclk = dp->link.cap.link_rate * HIBMC_DP_LINK_RATE_CAL;
> +
> +	htotal_int = mode->htotal * 9947 / 10000;
> +	htotal_size = htotal_int * fclk / (HIBMC_DP_SYMBOL_PER_FCLK * (mode->clock / 1000));
> +
> +	hblank_int = mode->htotal - mode->hdisplay - mode->hdisplay * 53 / 10000;
> +	hblank_size = hblank_int * fclk * 9947 /

Still no idea, what 0.9947 is.

> +		      (mode->clock * 10 * HIBMC_DP_SYMBOL_PER_FCLK);
> +
> +	drm_info(dp->dev, "h_active %u v_active %u htotal_size %u hblank_size %u",
> +		 mode->hdisplay, mode->vdisplay, htotal_size, hblank_size);
> +	drm_info(dp->dev, "flink_clock %u pixel_clock %d", fclk, mode->clock / 1000);

And here. Please review the driver not to output any debug information
by default.

> +
> +	hibmc_dp_reg_write_field(dp, HIBMC_DP_VIDEO_HORIZONTAL_SIZE,
> +				 HIBMC_DP_CFG_STREAM_HTOTAL_SIZE, htotal_size);
> +	hibmc_dp_reg_write_field(dp, HIBMC_DP_VIDEO_HORIZONTAL_SIZE,
> +				 HIBMC_DP_CFG_STREAM_HBLANK_SIZE, hblank_size);
> +}
> +

Other than that LGTM

-- 
With best wishes
Dmitry


More information about the dri-devel mailing list