[PATCH 2/7] drm/tidss: Remove unused OCP error flag

[Devarsh Thakkar]

On 21/10/24 19:37, Tomi Valkeinen wrote:
> We never use the DSS_IRQ_DEVICE_OCP_ERR flag, and the HW doesn't even
> have such a bit... So remove it.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen at ideasonboard.com>

Reviewed-by: Devarsh Thakkar <devarsht at ti.com>

Regards
Devarsh
> ---
>  drivers/gpu/drm/tidss/tidss_irq.c | 5 +----
>  drivers/gpu/drm/tidss/tidss_irq.h | 4 +---
>  2 files changed, 2 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/tidss/tidss_irq.c b/drivers/gpu/drm/tidss/tidss_irq.c
> index 604334ef526a..91498ff664a2 100644
> --- a/drivers/gpu/drm/tidss/tidss_irq.c
> +++ b/drivers/gpu/drm/tidss/tidss_irq.c
> @@ -78,9 +78,6 @@ static irqreturn_t tidss_irq_handler(int irq, void *arg)
>  			tidss_crtc_error_irq(crtc, irqstatus);
>  	}
>  
> -	if (irqstatus & DSS_IRQ_DEVICE_OCP_ERR)
> -		dev_err_ratelimited(tidss->dev, "OCP error\n");
> -
>  	return IRQ_HANDLED;
>  }
>  
> @@ -105,7 +102,7 @@ int tidss_irq_install(struct drm_device *ddev, unsigned int irq)
>  	if (ret)
>  		return ret;
>  
> -	tidss->irq_mask = DSS_IRQ_DEVICE_OCP_ERR;
> +	tidss->irq_mask = 0;
>  
>  	for (unsigned int i = 0; i < tidss->num_crtcs; ++i) {
>  		struct tidss_crtc *tcrtc = to_tidss_crtc(tidss->crtcs[i]);
> diff --git a/drivers/gpu/drm/tidss/tidss_irq.h b/drivers/gpu/drm/tidss/tidss_irq.h
> index b512614d5863..dd61f645f662 100644
> --- a/drivers/gpu/drm/tidss/tidss_irq.h
> +++ b/drivers/gpu/drm/tidss/tidss_irq.h
> @@ -19,15 +19,13 @@
>   * bit use   |D  |fou|FEOL|FEOL|FEOL|FEOL|  UUUU  |          |
>   * bit number|0  |1-3|4-7 |8-11|  12-19  | 20-23  |  24-31   |
>   *
> - * device bits:	D = OCP error
> + * device bits:	D = Unused
>   * WB bits:	f = frame done wb, o = wb buffer overflow,
>   *		u = wb buffer uncomplete
>   * vp bits:	F = frame done, E = vsync even, O = vsync odd, L = sync lost
>   * plane bits:	U = fifo underflow
>   */
>  
> -#define DSS_IRQ_DEVICE_OCP_ERR			BIT(0)
> -
>  #define DSS_IRQ_DEVICE_FRAMEDONEWB		BIT(1)
>  #define DSS_IRQ_DEVICE_WBBUFFEROVERFLOW		BIT(2)
>  #define DSS_IRQ_DEVICE_WBUNCOMPLETEERROR	BIT(3)
>