[PATCH AUTOSEL 6.11 15/87] drm/amd/display: Block UHBR Based On USB-C PD Cable ID

[Sasha Levin]

From: Michael Strauss <michael.strauss at amd.com>

[ Upstream commit 4f01a68751194d05280d659a65758c09e4af04d6 ]

[WHY]
Currently the absence of UHBR cable ID caps from USB-C PD does not block UHBR
rates. In situations where DPCD reports valid UHBR capability but USB-C PD
does not, such as using a USB-C to DP1.4 dongle connected to a native DP2.1
cable, link loss and lightup failures can be seen as a result.

Additionally, in edge cases where a platform supports cable ID but DMUB
doesn't correctly return cable ID caps, driver currently also allows UHBR.

[HOW]
Block UHBR rates over DP alt mode if cable id indicates no UHBR support.
Additionally, block UHBR rates if a cable ID supported platform receives no
reply from a DMUB cable id query.

Reviewed-by: Wenjing Liu <wenjing.liu at amd.com>
Reviewed-by: Ovidiu Bunea <ovidiu.bunea at amd.com>
Signed-off-by: Michael Strauss <michael.strauss at amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai at amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 .../dc/link/protocols/link_dp_capability.c    | 22 ++++++++++++++-----
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c
index 60015e94c4aa8..ae6d7e3d117e2 100644
--- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c
+++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_capability.c
@@ -1402,7 +1402,8 @@ static bool get_usbc_cable_id(struct dc_link *link, union dp_cable_id *cable_id)
 
 	if (!link->ctx->dmub_srv ||
 			link->ep_type != DISPLAY_ENDPOINT_PHY ||
-			link->link_enc->features.flags.bits.DP_IS_USB_C == 0)
+			link->link_enc->features.flags.bits.DP_IS_USB_C == 0 ||
+			link->link_enc->features.flags.bits.IS_DP2_CAPABLE == 0)
 		return false;
 
 	memset(&cmd, 0, sizeof(cmd));
@@ -1415,7 +1416,9 @@ static bool get_usbc_cable_id(struct dc_link *link, union dp_cable_id *cable_id)
 		cable_id->raw = cmd.cable_id.data.output_raw;
 		DC_LOG_DC("usbc_cable_id = %d.\n", cable_id->raw);
 	}
-	return cmd.cable_id.header.ret_status == 1;
+
+	ASSERT(cmd.cable_id.header.ret_status);
+	return true;
 }
 
 static void retrieve_cable_id(struct dc_link *link)
@@ -2087,6 +2090,8 @@ struct dc_link_settings dp_get_max_link_cap(struct dc_link *link)
 	/* get max link encoder capability */
 	if (link_enc)
 		link_enc->funcs->get_max_link_cap(link_enc, &max_link_cap);
+	else
+		return max_link_cap;
 
 	/* Lower link settings based on sink's link cap */
 	if (link->reported_link_cap.lane_count < max_link_cap.lane_count)
@@ -2120,10 +2125,15 @@ struct dc_link_settings dp_get_max_link_cap(struct dc_link *link)
 	 */
 	cable_max_link_rate = get_cable_max_link_rate(link);
 
-	if (!link->dc->debug.ignore_cable_id &&
-			cable_max_link_rate != LINK_RATE_UNKNOWN) {
-		if (cable_max_link_rate < max_link_cap.link_rate)
-			max_link_cap.link_rate = cable_max_link_rate;
+	if (!link->dc->debug.ignore_cable_id) {
+		if (cable_max_link_rate != LINK_RATE_UNKNOWN)
+			// cable max link rate known
+			max_link_cap.link_rate = MIN(max_link_cap.link_rate, cable_max_link_rate);
+		else if (link_enc->funcs->is_in_alt_mode && link_enc->funcs->is_in_alt_mode(link_enc))
+			// cable max link rate ambiguous, DP alt mode, limit to HBR3
+			max_link_cap.link_rate = MIN(max_link_cap.link_rate, LINK_RATE_HIGH3);
+		//else {}
+			// cable max link rate ambiguous, DP, do nothing
 
 		if (!link->dpcd_caps.cable_id.bits.UHBR13_5_CAPABILITY &&
 				link->dpcd_caps.cable_id.bits.CABLE_TYPE >= 2)
-- 
2.43.0