[PATCH v4 07/19] dt-bindings: interrupt-controller: Add i.MX8qxp Display Controller interrupt controller
Liu Ying
victor.liu at nxp.com
Mon Nov 25 09:33:04 UTC 2024
i.MX8qxp Display Controller has a built-in interrupt controller to support
Enable/Status/Preset/Clear interrupt bit.
Signed-off-by: Liu Ying <victor.liu at nxp.com>
Reviewed-by: Rob Herring (Arm) <robh at kernel.org>
---
v4:
* No change.
v3:
* Collect Rob's R-b tag.
v2:
* Drop unneeded "|". (Krzysztof)
.../fsl,imx8qxp-dc-intc.yaml | 318 ++++++++++++++++++
1 file changed, 318 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml
new file mode 100644
index 000000000000..6985ee644a25
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,imx8qxp-dc-intc.yaml
@@ -0,0 +1,318 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/fsl,imx8qxp-dc-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller interrupt controller
+
+description: |
+ The Display Controller has a built-in interrupt controller with the following
+ features for all relevant HW events:
+
+ * Enable bit (mask)
+ * Status bit (set by an HW event)
+ * Preset bit (can be used by SW to set status)
+ * Clear bit (used by SW to reset the status)
+
+ Each interrupt can be connected as IRQ (maskable) and/or NMI (non-maskable).
+ Alternatively the un-masked trigger signals for all HW events are provided,
+ allowing it to use a global interrupt controller instead.
+
+ Each interrupt can be protected against SW running in user mode. In that case,
+ only privileged AHB access can control the interrupt status.
+
+maintainers:
+ - Liu Ying <victor.liu at nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8qxp-dc-intc
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ "#interrupt-cells":
+ const: 1
+
+ interrupts:
+ items:
+ - description: store9 shadow load interrupt(blit engine)
+ - description: store9 frame complete interrupt(blit engine)
+ - description: store9 sequence complete interrupt(blit engine)
+ - description:
+ extdst0 shadow load interrupt
+ (display controller, content stream 0)
+ - description:
+ extdst0 frame complete interrupt
+ (display controller, content stream 0)
+ - description:
+ extdst0 sequence complete interrupt
+ (display controller, content stream 0)
+ - description:
+ extdst4 shadow load interrupt
+ (display controller, safety stream 0)
+ - description:
+ extdst4 frame complete interrupt
+ (display controller, safety stream 0)
+ - description:
+ extdst4 sequence complete interrupt
+ (display controller, safety stream 0)
+ - description:
+ extdst1 shadow load interrupt
+ (display controller, content stream 1)
+ - description:
+ extdst1 frame complete interrupt
+ (display controller, content stream 1)
+ - description:
+ extdst1 sequence complete interrupt
+ (display controller, content stream 1)
+ - description:
+ extdst5 shadow load interrupt
+ (display controller, safety stream 1)
+ - description:
+ extdst5 frame complete interrupt
+ (display controller, safety stream 1)
+ - description:
+ extdst5 sequence complete interrupt
+ (display controller, safety stream 1)
+ - description:
+ disengcfg0 shadow load interrupt
+ (display controller, display stream 0)
+ - description:
+ disengcfg0 frame complete interrupt
+ (display controller, display stream 0)
+ - description:
+ disengcfg0 sequence complete interrupt
+ (display controller, display stream 0)
+ - description:
+ framegen0 programmable interrupt0
+ (display controller, display stream 0)
+ - description:
+ framegen0 programmable interrupt1
+ (display controller, display stream 0)
+ - description:
+ framegen0 programmable interrupt2
+ (display controller, display stream 0)
+ - description:
+ framegen0 programmable interrupt3
+ (display controller, display stream 0)
+ - description:
+ signature0 shadow load interrupt
+ (display controller, display stream 0)
+ - description:
+ signature0 measurement valid interrupt
+ (display controller, display stream 0)
+ - description:
+ signature0 error condition interrupt
+ (display controller, display stream 0)
+ - description:
+ disengcfg1 shadow load interrupt
+ (display controller, display stream 1)
+ - description:
+ disengcfg1 frame complete interrupt
+ (display controller, display stream 1)
+ - description:
+ disengcfg1 sequence complete interrupt
+ (display controller, display stream 1)
+ - description:
+ framegen1 programmable interrupt0
+ (display controller, display stream 1)
+ - description:
+ framegen1 programmable interrupt1
+ (display controller, display stream 1)
+ - description:
+ framegen1 programmable interrupt2
+ (display controller, display stream 1)
+ - description:
+ framegen1 programmable interrupt3
+ (display controller, display stream 1)
+ - description:
+ signature1 shadow load interrupt
+ (display controller, display stream 1)
+ - description:
+ signature1 measurement valid interrupt
+ (display controller, display stream 1)
+ - description:
+ signature1 error condition interrupt
+ (display controller, display stream 1)
+ - description: reserved
+ - description:
+ command sequencer error condition interrupt(command sequencer)
+ - description:
+ common control software interrupt0(common control)
+ - description:
+ common control software interrupt1(common control)
+ - description:
+ common control software interrupt2(common control)
+ - description:
+ common control software interrupt3(common control)
+ - description:
+ framegen0 synchronization status activated interrupt
+ (display controller, safety stream 0)
+ - description:
+ framegen0 synchronization status deactivated interrupt
+ (display controller, safety stream 0)
+ - description:
+ framegen0 synchronization status activated interrupt
+ (display controller, content stream 0)
+ - description:
+ framegen0 synchronization status deactivated interrupt
+ (display controller, content stream 0)
+ - description:
+ framegen1 synchronization status activated interrupt
+ (display controller, safety stream 1)
+ - description:
+ framegen1 synchronization status deactivated interrupt
+ (display controller, safety stream 1)
+ - description:
+ framegen1 synchronization status activated interrupt
+ (display controller, content stream 1)
+ - description:
+ framegen1 synchronization status deactivated interrupt
+ (display controller, content stream 1)
+ minItems: 49
+
+ interrupt-names:
+ items:
+ - const: store9_shdload
+ - const: store9_framecomplete
+ - const: store9_seqcomplete
+ - const: extdst0_shdload
+ - const: extdst0_framecomplete
+ - const: extdst0_seqcomplete
+ - const: extdst4_shdload
+ - const: extdst4_framecomplete
+ - const: extdst4_seqcomplete
+ - const: extdst1_shdload
+ - const: extdst1_framecomplete
+ - const: extdst1_seqcomplete
+ - const: extdst5_shdload
+ - const: extdst5_framecomplete
+ - const: extdst5_seqcomplete
+ - const: disengcfg_shdload0
+ - const: disengcfg_framecomplete0
+ - const: disengcfg_seqcomplete0
+ - const: framegen0_int0
+ - const: framegen0_int1
+ - const: framegen0_int2
+ - const: framegen0_int3
+ - const: sig0_shdload
+ - const: sig0_valid
+ - const: sig0_error
+ - const: disengcfg_shdload1
+ - const: disengcfg_framecomplete1
+ - const: disengcfg_seqcomplete1
+ - const: framegen1_int0
+ - const: framegen1_int1
+ - const: framegen1_int2
+ - const: framegen1_int3
+ - const: sig1_shdload
+ - const: sig1_valid
+ - const: sig1_error
+ - const: reserved
+ - const: cmdseq_error
+ - const: comctrl_sw0
+ - const: comctrl_sw1
+ - const: comctrl_sw2
+ - const: comctrl_sw3
+ - const: framegen0_primsync_on
+ - const: framegen0_primsync_off
+ - const: framegen0_secsync_on
+ - const: framegen0_secsync_off
+ - const: framegen1_primsync_on
+ - const: framegen1_primsync_off
+ - const: framegen1_secsync_on
+ - const: framegen1_secsync_off
+ minItems: 49
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupt-controller
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-lpcg.h>
+
+ interrupt-controller at 56180040 {
+ compatible = "fsl,imx8qxp-dc-intc";
+ reg = <0x56180040 0x60>;
+ clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+ interrupt-controller;
+ interrupt-parent = <&dc0_irqsteer>;
+ #interrupt-cells = <1>;
+ interrupts = <448>, <449>, <450>, <64>,
+ <65>, <66>, <67>, <68>,
+ <69>, <70>, <193>, <194>,
+ <195>, <196>, <197>, <72>,
+ <73>, <74>, <75>, <76>,
+ <77>, <78>, <79>, <80>,
+ <81>, <199>, <200>, <201>,
+ <202>, <203>, <204>, <205>,
+ <206>, <207>, <208>, <5>,
+ <0>, <1>, <2>, <3>,
+ <4>, <82>, <83>, <84>,
+ <85>, <209>, <210>, <211>,
+ <212>;
+ interrupt-names = "store9_shdload",
+ "store9_framecomplete",
+ "store9_seqcomplete",
+ "extdst0_shdload",
+ "extdst0_framecomplete",
+ "extdst0_seqcomplete",
+ "extdst4_shdload",
+ "extdst4_framecomplete",
+ "extdst4_seqcomplete",
+ "extdst1_shdload",
+ "extdst1_framecomplete",
+ "extdst1_seqcomplete",
+ "extdst5_shdload",
+ "extdst5_framecomplete",
+ "extdst5_seqcomplete",
+ "disengcfg_shdload0",
+ "disengcfg_framecomplete0",
+ "disengcfg_seqcomplete0",
+ "framegen0_int0",
+ "framegen0_int1",
+ "framegen0_int2",
+ "framegen0_int3",
+ "sig0_shdload",
+ "sig0_valid",
+ "sig0_error",
+ "disengcfg_shdload1",
+ "disengcfg_framecomplete1",
+ "disengcfg_seqcomplete1",
+ "framegen1_int0",
+ "framegen1_int1",
+ "framegen1_int2",
+ "framegen1_int3",
+ "sig1_shdload",
+ "sig1_valid",
+ "sig1_error",
+ "reserved",
+ "cmdseq_error",
+ "comctrl_sw0",
+ "comctrl_sw1",
+ "comctrl_sw2",
+ "comctrl_sw3",
+ "framegen0_primsync_on",
+ "framegen0_primsync_off",
+ "framegen0_secsync_on",
+ "framegen0_secsync_off",
+ "framegen1_primsync_on",
+ "framegen1_primsync_off",
+ "framegen1_secsync_on",
+ "framegen1_secsync_off";
+ };
--
2.34.1
More information about the dri-devel
mailing list