[PATCH v2 3/3] drm/stm: dsi: use drm_mode_validate_mode() helper function
Sean Nyekjaer
sean at geanix.com
Mon Nov 25 13:49:28 UTC 2024
When using the DSI interface via DSI2LVDS bridge, it seems a bit harsh
to reguire the requested and the actual px clock to be within
50Hz. A typical LVDS display requires the px clock to be within +-10%.
In case for HDMI .5% tolerance is required.
Signed-off-by: Sean Nyekjaer <sean at geanix.com>
---
drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
index b20123854c4ad7b3a2cc973a26fc10fd433e8d09..7b32abe0d4f582eea1fbbacad48c84199be3fa23 100644
--- a/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
+++ b/drivers/gpu/drm/stm/dw_mipi_dsi-stm.c
@@ -484,8 +484,6 @@ dw_mipi_dsi_phy_get_timing(void *priv_data, unsigned int lane_mbps,
return 0;
}
-#define CLK_TOLERANCE_HZ 50
-
static enum drm_mode_status
dw_mipi_dsi_stm_mode_valid(void *priv_data,
const struct drm_display_mode *mode,
@@ -525,7 +523,7 @@ dw_mipi_dsi_stm_mode_valid(void *priv_data,
}
if (!(mode_flags & MIPI_DSI_MODE_VIDEO_BURST)) {
- unsigned int px_clock_hz, target_px_clock_hz, lane_mbps;
+ unsigned int px_clock_hz, lane_mbps;
int dsi_short_packet_size_px, hfp, hsync, hbp, delay_to_lp;
struct dw_mipi_dsi_dphy_timing dphy_timing;
@@ -533,14 +531,14 @@ dw_mipi_dsi_stm_mode_valid(void *priv_data,
pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
px_clock_hz = DIV_ROUND_CLOSEST_ULL(1000ULL * pll_out_khz * lanes, bpp);
- target_px_clock_hz = mode->clock * 1000;
/*
* Filter modes according to the clock value, particularly useful for
* hdmi modes that require precise pixel clocks.
*/
- if (px_clock_hz < target_px_clock_hz - CLK_TOLERANCE_HZ ||
- px_clock_hz > target_px_clock_hz + CLK_TOLERANCE_HZ)
- return MODE_CLOCK_RANGE;
+
+ ret = drm_mode_validate_mode(mode, px_clock_hz);
+ if (ret)
+ return ret;
/* sync packets are codes as DSI short packets (4 bytes) */
dsi_short_packet_size_px = DIV_ROUND_UP(4 * BITS_PER_BYTE, bpp);
--
2.46.2
More information about the dri-devel
mailing list