[PATCH v1 1/7] dt-bindings: display: mediatek: Add binding for HDMIv2 DDC

[AngeloGioacchino Del Regno]

Il 21/11/24 22:02, Rob Herring ha scritto:
> On Wed, Nov 20, 2024 at 01:45:06PM +0100, AngeloGioacchino Del Regno wrote:
>> Add a binding for the Display Data Channel (DDC) IP in MediaTek
>> SoCs with version 2 HDMI TX IP.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
>> ---
>>   .../mediatek/mediatek,mt8195-hdmi-ddc.yaml    | 41 +++++++++++++++++++
>>   1 file changed, 41 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
>> new file mode 100644
>> index 000000000000..d85e8ed2ffa7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml
>> @@ -0,0 +1,41 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi-ddc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: MediaTek HDMI Display Data Channel (DDC) v2
>> +
>> +maintainers:
>> +  - AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
>> +  - CK Hu <ck.hu at mediatek.com>
>> +
>> +properties:
>> +  compatible:
>> +    oneOf:
>> +      - const: mediatek,mt8195-hdmi-ddc
>> +      - items:
>> +          - const: mediatek,mt8188-hdmi-ddc
>> +          - const: mediatek,mt8195-hdmi-ddc
>> +
>> +  clocks:
>> +    maxItems: 1
>> +
>> +  power-domains:
>> +    maxItems: 1
>> +
>> +required:
>> +  - compatible
>> +  - clocks
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    hdmi {
>> +        hdmi_ddc: i2c {
>> +            compatible = "mediatek,mt8195-hdmi-ddc";
>> +            clocks = <&clk26m>;
> 
> Is this really a separate block? Doesn't really look like it. You don't
> even have registers to interact with it.
> 

MTK DDCv2, subnode of HDMI, uses registers from the iospace of its parent, so,
from the HDMI controller.

That one is a separate block, it's just that some of its registers are mixed inside
of the register space of the HDMI controller itself... MediaTek likes to do that a
lot... in this case, that is because of some hotplug detection bits (and some MCU
related ones too) being shared between the DDC controller and the HDMI one, but
then - apart from that - the DDC controller is the DDC controller and the HDMI one
is... the HDMI one. :-)

Cheers,
Angelo

>> +        };
>> +    };
>> +...
>> -- 
>> 2.47.0
>>