[PATCH v4 0/3] Asus vivobook s15 improvements

[Maud Spierings via B4 Relay]

Improves several parts of the devicetree:
1. The eDP panel bindings
2. Add a lid switch
3. Add bluetooth and describe wlan (depends on [1])

[1]: https://lore.kernel.org/all/20241007-x1e80100-pwrseq-qcp-v1-0-f7166510ab17@linaro.org/

---
I seem to get a warning that the pci17cb vendor is undocumented (wlan)
I can find this compatible in
Documentation/devicetree/bindings/net/wireless/qcom,ath12k.yaml
But pci17cb doesn't really seem like a vendor name to me, I have ignored
this warning for now.

Changes in v4:
- Fixed the pin parameters for the backlight enable pin
- Fixed the wcn_sw_en drive-strength, this was not in the acpi table I
  checked.
- Fixed the ordering of several nodes in the bluetooth/wifi patch
- Link to v3: https://lore.kernel.org/r/20241124-asus_qcom_display-v3-0-002b723b1920@hotmail.com

Changes in v3:
- Fixed commit message formatting (line wrapping)
- Fixed bad indentation (lid switch pinctrl)
- Fixed bluetooth addition and added wifi description
- Link to v2: https://lore.kernel.org/r/20241123-asus_qcom_display-v2-0-a0bff8576024@hotmail.com

Changes in v2:
- Add missing gpiokeys include in the lid switch patch
- Add depends on for the bluetooth patch
- Link to v1: https://lore.kernel.org/r/20241123-asus_qcom_display-v1-0-85a9ff9240aa@hotmail.com

---
Maud Spierings (3):
      arm64: dts: qcom: x1e80100-vivobook-s15: Use the samsung,atna33xc20 panel driver
      arm64: dts: qcom: x1e80100-vivobook-s15: Add lid switch
      arm64: dts: qcom: x1e80100-vivobook-s15: Add bluetooth

 .../boot/dts/qcom/x1e80100-asus-vivobook-s15.dts   | 203 ++++++++++++++++++++-
 1 file changed, 202 insertions(+), 1 deletion(-)
---
base-commit: 5f48de798324665d18f539ee09a61de1a9221f33
change-id: 20241116-asus_qcom_display-ce5ff7293340

Best regards,
-- 
Maud Spierings <maud_spierings at hotmail.com>