[PATCH v2 2/4] drm/i915/dp_mst: Expose a connector to kernel users after it's properly initialized

[Imre Deak]

After a connector is added to the drm_mode_config::connector_list, it's
visible to any in-kernel users looking up connectors via the above list.
Make sure that the connector is properly initialized before such
look-ups.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 29 ++++++++-------------
 1 file changed, 11 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
index c59c2c14679c4..3c21805f5d1eb 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
@@ -1700,6 +1700,8 @@ mst_topology_add_connector(struct drm_dp_mst_topology_mgr *mgr,
 	if (!intel_connector)
 		return NULL;
 
+	connector = &intel_connector->base;
+
 	intel_connector->get_hw_state = mst_connector_get_hw_state;
 	intel_connector->sync_state = intel_dp_connector_sync_state;
 	intel_connector->mst_port = intel_dp;
@@ -1708,30 +1710,19 @@ mst_topology_add_connector(struct drm_dp_mst_topology_mgr *mgr,
 
 	intel_dp_init_modeset_retry_work(intel_connector);
 
-	/*
-	 * TODO: The following drm_connector specific initialization belongs
-	 * to DRM core, however it happens atm too late in
-	 * drm_connector_init(). That function will also expose the connector
-	 * to in-kernel users, so it can't be called until the connector is
-	 * sufficiently initialized; init the device pointer used by the
-	 * following DSC setup, until a fix moving this to DRM core.
-	 */
-	intel_connector->base.dev = mgr->dev;
-
-	intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port);
-	intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector);
-	intel_connector->dp.dsc_hblank_expansion_quirk =
-		detect_dsc_hblank_expansion_quirk(intel_connector);
-
-	connector = &intel_connector->base;
-	ret = drm_connector_init(display->drm, connector, &mst_connector_funcs,
-				 DRM_MODE_CONNECTOR_DisplayPort);
+	ret = drm_connector_init_core(display->drm, connector, &mst_connector_funcs,
+				      DRM_MODE_CONNECTOR_DisplayPort, NULL);
 	if (ret) {
 		drm_dp_mst_put_port_malloc(port);
 		intel_connector_free(intel_connector);
 		return NULL;
 	}
 
+	intel_connector->dp.dsc_decompression_aux = drm_dp_mst_dsc_aux_for_port(port);
+	intel_dp_mst_read_decompression_port_dsc_caps(intel_dp, intel_connector);
+	intel_connector->dp.dsc_hblank_expansion_quirk =
+		detect_dsc_hblank_expansion_quirk(intel_connector);
+
 	drm_connector_helper_add(connector, &mst_connector_helper_funcs);
 
 	for_each_pipe(display, pipe) {
@@ -1752,6 +1743,8 @@ mst_topology_add_connector(struct drm_dp_mst_topology_mgr *mgr,
 		drm_dbg_kms(display->drm, "[%s:%d] HDCP MST init failed, skipping.\n",
 			    connector->name, connector->base.id);
 
+	drm_connector_add(connector);
+
 	return connector;
 
 err:
-- 
2.44.2