[PATCH v1 06/10] drm/bridge: analogix_dp: Add support for phy configuration.
Damon Ding
damon.ding at rock-chips.com
Wed Nov 27 07:51:53 UTC 2024
Add support to configurate link rate, lane count, voltage swing and
pre-emphasis with phy_configure(). It is helpful in application scenarios
where analogix controller is mixed with the phy of other vendors.
Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
---
.../drm/bridge/analogix/analogix_dp_core.c | 4 +-
.../drm/bridge/analogix/analogix_dp_core.h | 2 +
.../gpu/drm/bridge/analogix/analogix_dp_reg.c | 90 +++++++++++++++++++
3 files changed, 94 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index 6f10d88a34c5..7624ed13cdbf 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1672,7 +1672,7 @@ EXPORT_SYMBOL_GPL(analogix_dp_probe);
int analogix_dp_suspend(struct analogix_dp_device *dp)
{
- phy_power_off(dp->phy);
+ analogix_dp_phy_power_off(dp);
if (dp->plat_data->power_off)
dp->plat_data->power_off(dp->plat_data);
@@ -1696,7 +1696,7 @@ int analogix_dp_resume(struct analogix_dp_device *dp)
if (dp->plat_data->power_on)
dp->plat_data->power_on(dp->plat_data);
- phy_power_on(dp->phy);
+ analogix_dp_phy_power_on(dp);
analogix_dp_init_dp(dp);
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
index 774d11574b09..a76079d61768 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h
@@ -232,5 +232,7 @@ int analogix_dp_send_psr_spd(struct analogix_dp_device *dp,
struct dp_sdp *vsc, bool blocking);
ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
struct drm_dp_aux_msg *msg);
+void analogix_dp_phy_power_on(struct analogix_dp_device *dp);
+void analogix_dp_phy_power_off(struct analogix_dp_device *dp);
#endif /* _ANALOGIX_DP_CORE_H */
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
index 3afc73c858c4..809bb0c72d18 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c
@@ -11,6 +11,7 @@
#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/iopoll.h>
+#include <linux/phy/phy.h>
#include <drm/bridge/analogix_dp.h>
@@ -513,10 +514,27 @@ void analogix_dp_enable_sw_function(struct analogix_dp_device *dp)
void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype)
{
u32 reg;
+ int ret;
reg = bwtype;
if ((bwtype == DP_LINK_BW_2_7) || (bwtype == DP_LINK_BW_1_62))
writel(reg, dp->reg_base + ANALOGIX_DP_LINK_BW_SET);
+
+ if (dp->phy) {
+ union phy_configure_opts phy_cfg = {0};
+
+ phy_cfg.dp.lanes = dp->link_train.lane_count;
+ phy_cfg.dp.link_rate =
+ drm_dp_bw_code_to_link_rate(dp->link_train.link_rate) / 100;
+ phy_cfg.dp.set_lanes = false;
+ phy_cfg.dp.set_rate = true;
+ phy_cfg.dp.set_voltages = false;
+ ret = phy_configure(dp->phy, &phy_cfg);
+ if (ret && ret != -EOPNOTSUPP) {
+ dev_err(dp->dev, "%s: phy_configure() failed: %d\n", __func__, ret);
+ return;
+ }
+ }
}
void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype)
@@ -530,9 +548,24 @@ void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype)
void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count)
{
u32 reg;
+ int ret;
reg = count;
writel(reg, dp->reg_base + ANALOGIX_DP_LANE_COUNT_SET);
+
+ if (dp->phy) {
+ union phy_configure_opts phy_cfg = {0};
+
+ phy_cfg.dp.lanes = dp->link_train.lane_count;
+ phy_cfg.dp.set_lanes = true;
+ phy_cfg.dp.set_rate = false;
+ phy_cfg.dp.set_voltages = false;
+ ret = phy_configure(dp->phy, &phy_cfg);
+ if (ret && ret != -EOPNOTSUPP) {
+ dev_err(dp->dev, "%s: phy_configure() failed: %d\n", __func__, ret);
+ return;
+ }
+ }
}
void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count)
@@ -546,10 +579,39 @@ void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count)
void analogix_dp_set_lane_link_training(struct analogix_dp_device *dp)
{
u8 lane;
+ int ret;
for (lane = 0; lane < dp->link_train.lane_count; lane++)
writel(dp->link_train.training_lane[lane],
dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL + 4 * lane);
+
+ if (dp->phy) {
+ union phy_configure_opts phy_cfg = {0};
+
+ for (lane = 0; lane < dp->link_train.lane_count; lane++) {
+ u8 training_lane = dp->link_train.training_lane[lane];
+ u8 vs, pe;
+
+ vs = (training_lane & DP_TRAIN_VOLTAGE_SWING_MASK) >>
+ DP_TRAIN_VOLTAGE_SWING_SHIFT;
+ pe = (training_lane & DP_TRAIN_PRE_EMPHASIS_MASK) >>
+ DP_TRAIN_PRE_EMPHASIS_SHIFT;
+ phy_cfg.dp.voltage[lane] = vs;
+ phy_cfg.dp.pre[lane] = pe;
+ }
+
+ phy_cfg.dp.lanes = dp->link_train.lane_count;
+ phy_cfg.dp.link_rate =
+ drm_dp_bw_code_to_link_rate(dp->link_train.link_rate) / 100;
+ phy_cfg.dp.set_lanes = false;
+ phy_cfg.dp.set_rate = false;
+ phy_cfg.dp.set_voltages = true;
+ ret = phy_configure(dp->phy, &phy_cfg);
+ if (ret && ret != -EOPNOTSUPP) {
+ dev_err(dp->dev, "%s: phy_configure() failed: %d\n", __func__, ret);
+ return;
+ }
+ }
}
u32 analogix_dp_get_lane_link_training(struct analogix_dp_device *dp, u8 lane)
@@ -1053,3 +1115,31 @@ ssize_t analogix_dp_transfer(struct analogix_dp_device *dp,
return -EREMOTEIO;
}
+
+void analogix_dp_phy_power_on(struct analogix_dp_device *dp)
+{
+ int ret;
+
+ ret = phy_set_mode(dp->phy, PHY_MODE_DP);
+ if (ret) {
+ dev_err(dp->dev, "%s: phy_set_mode() failed: %d\n", __func__, ret);
+ return;
+ }
+
+ ret = phy_power_on(dp->phy);
+ if (ret) {
+ dev_err(dp->dev, "%s: phy_power_on() failed: %d\n", __func__, ret);
+ return;
+ }
+}
+
+void analogix_dp_phy_power_off(struct analogix_dp_device *dp)
+{
+ int ret;
+
+ ret = phy_power_off(dp->phy);
+ if (ret) {
+ dev_err(dp->dev, "%s: phy_power_off() failed: %d\n", __func__, ret);
+ return;
+ }
+}
--
2.34.1
More information about the dri-devel
mailing list