[WIP RFC v2 15/35] WIP: rust: drm/kms: Add OpaquePlane and OpaquePlaneState

[Daniel Almeida]

Hi Lyude,

> On 30 Sep 2024, at 20:09, Lyude Paul <lyude at redhat.com> wrote:
> 
> Same thing as OpaqueCrtc and OpaqueCrtcState, but for plane states now.
> 
> Signed-off-by: Lyude Paul <lyude at redhat.com>
> 
> ---
> 
> TODO:
> * Finish adding upcast functions.
> 
> Signed-off-by: Lyude Paul <lyude at redhat.com>
> ---
> rust/kernel/drm/kms/plane.rs | 143 +++++++++++++++++++++++++++++++++++
> 1 file changed, 143 insertions(+)
> 
> diff --git a/rust/kernel/drm/kms/plane.rs b/rust/kernel/drm/kms/plane.rs
> index 3040c4546b121..3ace487316d46 100644
> --- a/rust/kernel/drm/kms/plane.rs
> +++ b/rust/kernel/drm/kms/plane.rs
> @@ -217,6 +217,43 @@ pub fn new<'a, 'b: 'a, const FMT_COUNT: usize, const MOD_COUNT: usize>(
>         // SAFETY: We don't move anything
>         Ok(unsafe { &*Box::into_raw(Pin::into_inner_unchecked(this)) })
>     }
> +
> +    /// Attempt to convert an [`OpaquePlane`] into a fully qualified [`Plane`].
> +    ///
> +    /// This checks if the given [`OpaquePlane`] uses the same [`DriverPlane`] implementation, and
> +    /// returns the [`OpaquePlane`] as a [`Plane`] object if so.
> +    pub fn try_from_opaque<'a, D>(opaque: &'a OpaquePlane<D>) -> Option<&'a Self>
> +    where
> +        D: KmsDriver,
> +        T: DriverPlane<Driver = D>
> +    {
> +        // SAFETY: The vtables for a `Plane` are initialized by the time that we expose `Plane`
> +        // objects to users, and their values are invariant throughout the lifetime of the device.
> +        let funcs = unsafe { (*opaque.plane.get()).funcs };
> +
> +        // SAFETY: We just guaranteed that the opaque plane shares our vtable pointers, which means
> +        // it must belong to our `DriverPlane` implementation. As well, all `Plane<DriverPlane>`
> +        // objects start with an identical data layout to `OpaquePlane`
> +        ptr::eq(funcs, &T::OPS.funcs).then(|| unsafe { mem::transmute(opaque) })
> +    }
> +
> +    /// Convert a [`OpaquePlane`] into its fully qualified [`Plane`].
> +    ///
> +    /// This is an infallible version of [`Self::try_from_opaque`]. This function is mainly useful
> +    /// for drivers where only a single [`DriverPlane`] implementation exists.
> +    ///
> +    /// # Panics
> +    ///
> +    /// This function will panic if the underlying [`Plane`] which contains the provided
> +    /// [`OpaquePlane`] does not belong to the same [`DriverPlane`] implementation.
> +    pub fn from_opaque<'a, D>(opaque: &'a OpaquePlane<D>) -> &'a Self
> +    where
> +        D: KmsDriver,
> +        T: DriverPlane<Driver = D>
> +    {
> +        Self::try_from_opaque(opaque)
> +            .expect("Passed OpaquePlane does not share this DriverPlane implementation")
> +    }

I guess the same question from the previous patch applies. If a driver has only a single implementor for
`DriverPlane`, why should it care about OpaquePlane?

> }
> 
> /// A trait implemented by any type that acts as a [`struct drm_plane`] interface.
> @@ -275,6 +312,63 @@ unsafe impl<T: DriverPlane> Send for Plane<T> {}
> // SAFETY: Our interface is thread-safe.
> unsafe impl<T: DriverPlane> Sync for Plane<T> {}
> 
> +/// A [`struct drm_plane`] without a known [`DriverPlane`] implementation.
> +///
> +/// This is mainly for situations where our bindings can't infer the [`DriverPlane`] implementation
> +/// for a [`struct drm_plane`] automatically. It is identical to [`Plane`], except that it does not
> +/// provide access to the driver's private data.
> +///
> +/// It may be upcasted to a full [`Plane`] using [`Plane::from_opaque`] or
> +/// [`Plane::try_from_opaque`].
> +///
> +/// # Invariants
> +///
> +/// - `plane` is initialized for as long as this object is made available to users.
> +/// - The data layout of this structure is equivalent to [`struct drm_plane`].
> +///
> +/// [`struct drm_plane`]: srctree/include/drm/drm_plane.h
> +#[repr(transparent)]
> +pub struct OpaquePlane<T: KmsDriver> {
> +    plane: Opaque<bindings::drm_plane>,
> +    _p: PhantomData<T>,
> +}
> +
> +impl<T: KmsDriver> Sealed for OpaquePlane<T> {}
> +
> +impl<T: KmsDriver> AsRawPlane for OpaquePlane<T> {
> +    type State = OpaquePlaneState<T>;
> +
> +    fn as_raw(&self) -> *mut bindings::drm_plane {
> +        self.plane.get()
> +    }
> +
> +    unsafe fn from_raw<'a>(ptr: *mut bindings::drm_plane) -> &'a Self {
> +        // SAFETY: Our data layout is identical to `bindings::drm_plane`
> +        unsafe { &*ptr.cast() }
> +    }
> +}
> +
> +impl<T: KmsDriver> ModeObject for OpaquePlane<T> {
> +    type Driver = T;
> +
> +    fn drm_dev(&self) -> &Device<Self::Driver> {
> +        // SAFETY: DRM planes exist for as long as the device does, so this pointer is always valid
> +        unsafe { Device::borrow((*self.as_raw()).dev) }
> +    }
> +
> +    fn raw_mode_obj(&self) -> *mut bindings::drm_mode_object {
> +        // SAFETY: We don't expose DRM planes to users before `base` is initialized
> +        unsafe { &mut ((*self.as_raw()).base) }
> +    }
> +}
> +
> +// SAFETY: Planes do not have a refcount
> +unsafe impl<T: KmsDriver> StaticModeObject for OpaquePlane<T> {}
> +
> +// SAFETY: Our plane interfaces are guaranteed to be thread-safe
> +unsafe impl<T: KmsDriver> Send for OpaquePlane<T> {}
> +unsafe impl<T: KmsDriver> Sync for OpaquePlane<T> {}
> +
> /// A trait implemented by any type which can produce a reference to a [`struct drm_plane_state`].
> ///
> /// This is implemented internally by DRM.
> @@ -419,6 +513,55 @@ fn deref_mut(&mut self) -> &mut Self::Target {
>     }
> }
> 
> +/// A [`struct drm_plane_state`] without a known [`DriverPlaneState`] implementation.
> +///
> +/// This is mainly for situations where our bindings can't infer the [`DriverPlaneState`]
> +/// implementation for a [`struct drm_plane_state`] automatically. It is identical to [`Plane`],
> +/// except that it does not provide access to the driver's private data.
> +///
> +/// TODO: Add upcast functions
> +///
> +/// # Invariants
> +///
> +/// - The DRM C API and our interface guarantees that only the user has mutable access to `state`,
> +///   up until [`drm_atomic_helper_commit_hw_done`] is called. Therefore, `plane` follows rust's
> +///   data aliasing rules and does not need to be behind an [`Opaque`] type.
> +/// - `state` is initialized for as long as this object is exposed to users.
> +/// - The data layout of this structure is identical to [`struct drm_plane_state`].
> +///
> +/// [`struct drm_plane_state`]: srctree/include/drm/drm_plane.h
> +/// [`drm_atomic_helper_commit_hw_done`]: srctree/include/drm/drm_atomic_helper.h
> +#[repr(transparent)]
> +pub struct OpaquePlaneState<T: KmsDriver> {
> +    state: bindings::drm_plane_state,
> +    _p: PhantomData<T>,
> +}
> +
> +impl<T: KmsDriver> AsRawPlaneState for OpaquePlaneState<T> {
> +    type Plane = OpaquePlane<T>;
> +}
> +
> +impl<T: KmsDriver> private::AsRawPlaneState for OpaquePlaneState<T> {
> +    fn as_raw(&self) -> &bindings::drm_plane_state {
> +        &self.state
> +    }
> +
> +    unsafe fn as_raw_mut(&mut self) -> &mut bindings::drm_plane_state {
> +        &mut self.state
> +    }
> +}
> +
> +impl<T: KmsDriver> FromRawPlaneState for OpaquePlaneState<T> {
> +    unsafe fn from_raw<'a>(ptr: *const bindings::drm_plane_state) -> &'a Self {
> +        // SAFETY: Our data layout is identical to `ptr`
> +        unsafe { &*ptr.cast() }
> +    }
> +
> +    unsafe fn from_raw_mut<'a>(ptr: *mut bindings::drm_plane_state) -> &'a mut Self {
> +        // SAFETY: Our data layout is identical to `ptr`
> +        unsafe { &mut *ptr.cast() }
> +    }
> +}
> unsafe extern "C" fn plane_destroy_callback<T: DriverPlane>(
>     plane: *mut bindings::drm_plane
> ) {
> -- 
> 2.46.1
> 

Apart for the clarification I asked above, this patch looks good.

— Daniel