[PATCH v1 2/7] dt-bindings: display: mediatek: Add binding for MT8195 HDMI-TX v2

[CK Hu (胡俊光)]

On Thu, 2024-11-28 at 11:32 +0100, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until you have verified the sender or the content.
> 
> 
> Il 28/11/24 07:02, CK Hu (胡俊光) ha scritto:
> > Hi, Angelo:
> > 
> > On Wed, 2024-11-20 at 13:45 +0100, AngeloGioacchino Del Regno wrote:
> > > External email : Please do not click links or open attachments until you have verified the sender or the content.
> > > 
> > > 
> > > Add a binding for the HDMI TX v2 Encoder found in MediaTek MT8195
> > > and MT8188 SoCs.
> > > 
> > > This fully supports the HDMI Specification 2.0b, hence it provides
> > > support for 3D-HDMI, Polarity inversion, up to 16 bits Deep Color,
> > > color spaces including RGB444, YCBCR420/422/444 (ITU601/ITU709) and
> > > xvYCC, with output resolutions up to 3840x2160p at 60Hz.
> > > 
> > > Moreover, it also supports HDCP 1.4 and 2.3, Variable Refresh Rate
> > > (VRR) and Consumer Electronics Control (CEC).
> > > 
> > > This IP also includes support for HDMI Audio, including IEC60958
> > > and IEC61937 SPDIF, 8-channel PCM, DSD, and other lossless audio
> > > according to HDMI 2.0.
> > > 
> > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> > > ---
> > >   .../mediatek/mediatek,mt8195-hdmi.yaml        | 150 ++++++++++++++++++
> > >   1 file changed, 150 insertions(+)
> > >   create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
> > > new file mode 100644
> > > index 000000000000..273a8871461e
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mt8195-hdmi.yaml
> > > @@ -0,0 +1,150 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/display/mediatek/mediatek,mt8195-hdmi.yaml*__;Iw!!CTRNKA9wMg0ARbw!lu0D_C3TwQ2-02jWYABnMIQ8vEoUwP0O4gbQndJnPUMpdi6wXdAHra9ivCfB7zoelDI7qsS20YdRlmP4bEKAABletXFX$
> > > +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!lu0D_C3TwQ2-02jWYABnMIQ8vEoUwP0O4gbQndJnPUMpdi6wXdAHra9ivCfB7zoelDI7qsS20YdRlmP4bEKAAFlnY-KY$
> > > +
> > > +title: MediaTek HDMI-TX v2 Encoder
> > > +
> > > +maintainers:
> > > +  - AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> > > +  - CK Hu <ck.hu at mediatek.com>
> > > +
> > > +description: |
> > > +  The MediaTek HDMI-TX v2 encoder can generate HDMI format data based on
> > > +  the HDMI Specification 2.0b.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - mediatek,mt8188-hdmi-tx
> > > +      - mediatek,mt8195-hdmi-tx
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +
> > > +  interrupts:
> > > +    maxItems: 1
> > > +
> > > +  clocks:
> > > +    items:
> > > +      - description: HDMI APB clock
> > > +      - description: HDCP top clock
> > > +      - description: HDCP reference clock
> > > +      - description: VPP HDMI Split clock
> > 
> > I would like to know more about HDMI v2.
> > Would you map each v2 clock to v1 clock?
> > If one clock has no mapping, is it a new feature that v1 does not has?
> > 
> 
> The HDMIv2 HW block seems to be almost completely different from the v1, and
> it is also interconnected in a different way compared to MT8173 (the path goes
> through VPP1, while the v1 is just direct to DPI/MMSYS).
> 
> The v1 block had specific clocks for the audio (i2s, I believe) and for the SPDIF,
> and I have no idea how v1 does HDCP, but I don't see any specific clock for that.
> 
> The v2 block is clocked from the HDCP clock, the (apb) bus has its own clock, and
> the video out needs the vpp split clock.
> 
> It's just different, and we can't shove the v2 binding inside of the v1 one, but
> even if we could, since the v2 block is *that much* different from v1, it'd be a
> mistake to do so.
> 
> Since the binding describes hardware, and since this v2 HW is *very* different
> from v1, it needs a new binding document, that is true even if you find a way to
> get the clocks to match (which is not possible, anyway).

v2 indeed is very different from v1, so it's not necessary to merge binding document.
I would like to have more information about the difference in binding document,
so that we could clearly understand that v1 and v2 are so different.

I think pixel clock is important for HDMI hardware, but I do not see it in HDMI v2.
It is better has some documentation about why pixel clock disappear in HDMI v2.

I've some 'WHY' about v2.
Why no audio clock in v2?
Audio control part is moved out of HDMI block?

For HDCP, maybe v1 driver has not implement it so forget to add it in binding document.
So just skip the HDCP.

The four clock in v2 does not exist in v1, so what is the function of each one?
If possible, ask MediaTek staff for more information.

Regards,
CK

> 
> Cheers,
> Angelo
> 
> > Regards,
> > CK
> > 
> > > +
> > > +  clock-names:
> > > +    items:
> > > +      - const: bus
> > > +      - const: hdcp
> > > +      - const: hdcp24m
> > > +      - const: hdmi-split
> > > +
> > > 
> > > --
> > > 2.47.0
> > > 
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20241129/0690cf1b/attachment-0001.htm>