[PATCH 3/8] phy: qcom: qmp-usbc: Add DP phy mode support on QCS615
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Fri Nov 29 14:33:13 UTC 2024
On Fri, 29 Nov 2024 at 09:59, Xiangxu Yin <quic_xiangxuy at quicinc.com> wrote:
>
> Extended DP support for QCS615 USB or DP phy. Differentiated between
> USBC and DP PHY using the match table’s type, dynamically generating
> different types of cfg and layout attributes during initialization based
> on this type. Static variables are stored in cfg, while parsed values
> are organized into the layout structure.
We didn't have an understanding / conclusion whether
qcom,usb-ssphy-qmp-usb3-or-dp PHYs are actually a single device / PHY
or two PHYs being placed next to each other. Could you please start
your commit message by explaining it? Or even better, make that a part
of the cover letter for a new series touching just the USBC PHY
driver. DP changes don't have anything in common with the PHY changes,
so you can split the series into two.
>
> Signed-off-by: Xiangxu Yin <quic_xiangxuy at quicinc.com>
> ---
> drivers/phy/qualcomm/phy-qcom-qmp-dp-phy.h | 1 +
> drivers/phy/qualcomm/phy-qcom-qmp-usbc.c | 1453 ++++++++++++++++++++++++----
Too many changes for a single patch. Please split into logical chunks.
> 2 files changed, 1254 insertions(+), 200 deletions(-)
>
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-dp-phy.h b/drivers/phy/qualcomm/phy-qcom-qmp-dp-phy.h
> index 0ebd405bcaf0cac8215550bfc9b226f30cc43a59..59885616405f878885d0837838a0bac1899fb69f 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-dp-phy.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-dp-phy.h
> @@ -25,6 +25,7 @@
> #define QSERDES_DP_PHY_AUX_CFG7 0x03c
> #define QSERDES_DP_PHY_AUX_CFG8 0x040
> #define QSERDES_DP_PHY_AUX_CFG9 0x044
> +#define QSERDES_DP_PHY_VCO_DIV 0x068
>
> /* QSERDES COM_BIAS_EN_CLKBUFLR_EN bits */
> # define QSERDES_V3_COM_BIAS_EN 0x0001
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
> index cf12a6f12134dc77ff032f967b2efa43e3de4b21..7fece9d7dc959ed5a7c62077d8552324c3734859 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
> @@ -22,13 +22,20 @@
> #include <linux/slab.h>
> #include <linux/usb/typec.h>
> #include <linux/usb/typec_mux.h>
> +#include <dt-bindings/phy/phy-qcom-qmp.h>
> +#include <drm/bridge/aux-bridge.h>
>
> #include "phy-qcom-qmp-common.h"
>
> #include "phy-qcom-qmp.h"
> #include "phy-qcom-qmp-pcs-misc-v3.h"
>
> +#include "phy-qcom-qmp-dp-phy.h"
> +#include "phy-qcom-qmp-dp-phy-v3.h"
> +
> #define PHY_INIT_COMPLETE_TIMEOUT 10000
> +#define SW_PORTSELECT_VAL BIT(0)
> +#define SW_PORTSELECT_MUX BIT(1)
>
> /* set of registers with offsets different per-PHY */
> enum qphy_reg_layout {
> @@ -284,7 +291,26 @@ static const struct qmp_phy_init_tbl qcm2290_usb3_pcs_tbl[] = {
> QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
> };
>
> -struct qmp_usbc_offsets {
> +enum qmp_phy_usbc_type {
> + QMP_PHY_USBC_INVALID,
How can a type be invalid?
> + QMP_PHY_USBC_USB,
> + QMP_PHY_USBC_DP,
> +};
> +
> +/* list of regulators */
> +struct qmp_regulator_data {
> + const char *name;
> + unsigned int enable_load;
> +};
> +
> +struct dev_cfg {
> + int type;
> + const void *cfg;
> +};
> +
> +struct qmp_usbc;
> +
> +struct qmp_usbc_usb_offsets {
> u16 serdes;
> u16 pcs;
> u16 pcs_misc;
> @@ -295,9 +321,9 @@ struct qmp_usbc_offsets {
> u16 rx2;
> };
>
> -/* struct qmp_phy_cfg - per-PHY initialization config */
> -struct qmp_phy_cfg {
> - const struct qmp_usbc_offsets *offsets;
> +/* struct qmp_phy_usb_cfg - per-usb PHY initialization config */
what is "per-usb PHY"?
> +struct qmp_phy_usb_cfg {
> + const struct qmp_usbc_usb_offsets *offsets;
>
> /* Init sequence for PHY blocks - serdes, tx, rx, pcs */
> const struct qmp_phy_init_tbl *serdes_tbl;
> @@ -317,11 +343,7 @@ struct qmp_phy_cfg {
> const unsigned int *regs;
> };
>
> -struct qmp_usbc {
> - struct device *dev;
> -
> - const struct qmp_phy_cfg *cfg;
> -
> +struct qmp_phy_usb_layout {
> void __iomem *serdes;
> void __iomem *pcs;
> void __iomem *pcs_misc;
> @@ -329,28 +351,67 @@ struct qmp_usbc {
> void __iomem *rx;
> void __iomem *tx2;
> void __iomem *rx2;
> -
> struct regmap *tcsr_map;
> u32 vls_clamp_reg;
> -
> + enum phy_mode mode;
> + struct typec_switch_dev *sw;
> struct clk *pipe_clk;
> + struct clk_fixed_rate pipe_clk_fixed;
> +};
> +
> +struct qmp_usbc_dp_offsets {
> + u16 dp_serdes;
> + u16 dp_txa;
> + u16 dp_txb;
> + u16 dp_phy;
> +};
> +
> +/* struct qmp_phy_dp_cfg - per-dp PHY initialization config */
> +struct qmp_phy_dp_cfg {
> + const struct qmp_usbc_dp_offsets *offsets;
> +
> + /* DP PHY swing and pre_emphasis tables */
> + const u8 (*swing_tbl)[4][4];
> + const u8 (*pre_emphasis_tbl)[4][4];
> +
> + // /* DP PHY callbacks */
> + int (*dp_aux_init)(struct qmp_usbc *qmp);
> + int (*configure_dp_serdes)(struct qmp_usbc *qmp);
> + int (*configure_dp_voltages)(struct qmp_usbc *qmp);
> + int (*configure_dp_phy)(struct qmp_usbc *qmp);
> + int (*calibrate_dp_phy)(struct qmp_usbc *qmp);
> +
> + const struct qmp_regulator_data *vreg_list;
> + int num_vregs;
> +};
> +
> +struct qmp_phy_dp_layout {
> + void __iomem *dp_phy;
> + void __iomem *dp_tx;
> + void __iomem *dp_tx2;
> + void __iomem *dp_serdes;
> + struct regmap *tcsr_map;
> + u32 dp_phy_mode;
> + unsigned int dp_aux_cfg;
> + struct phy_configure_opts_dp dp_opts;
> + struct clk_hw dp_link_hw;
> + struct clk_hw dp_pixel_hw;
> +};
> +
> +struct qmp_usbc {
> + struct device *dev;
> + int type;
> struct clk_bulk_data *clks;
> int num_clks;
> int num_resets;
> struct reset_control_bulk_data *resets;
> struct regulator_bulk_data *vregs;
> -
> struct mutex phy_mutex;
> -
> - enum phy_mode mode;
> - unsigned int usb_init_count;
> -
> struct phy *phy;
> -
> - struct clk_fixed_rate pipe_clk_fixed;
> -
> - struct typec_switch_dev *sw;
> enum typec_orientation orientation;
> + unsigned int init_count;
> + const void *cfg;
> + void *layout;
The patch contains a mixture of renames bundled with actual changes.
Please explain why old names are bad in a separate patch.
> };
>
> static inline void qphy_setbits(void __iomem *base, u32 offset, u32 val)
> @@ -391,12 +452,21 @@ static const char * const usb3phy_reset_l[] = {
> "phy_phy", "phy",
> };
>
> +static const char * const dp_usb3phy_reset_l[] = {
> + "phy",
> +};
> +
> /* list of regulators */
> -static const char * const qmp_phy_vreg_l[] = {
> +static const char * const qmp_phy_usb_vreg_l[] = {
> "vdda-phy", "vdda-pll",
> };
>
> -static const struct qmp_usbc_offsets qmp_usbc_offsets_v3_qcm2290 = {
> +static struct qmp_regulator_data qmp_phy_dp_vreg_l[] = {
> + { .name = "vdda-phy", .enable_load = 21800 },
> + { .name = "vdda-pll", .enable_load = 36000 },
> +};
> +
> +static const struct qmp_usbc_usb_offsets qmp_usbc_usb_offsets_v3_qcm2290 = {
> .serdes = 0x0,
> .pcs = 0xc00,
> .pcs_misc = 0xa00,
> @@ -406,8 +476,15 @@ static const struct qmp_usbc_offsets qmp_usbc_offsets_v3_qcm2290 = {
> .rx2 = 0x800,
> };
>
> -static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
> - .offsets = &qmp_usbc_offsets_v3_qcm2290,
> +static const struct qmp_usbc_dp_offsets qmp_usbc_dp_offsets_qcs615 = {
> + .dp_serdes = 0x0C00,
> + .dp_txa = 0x0400,
> + .dp_txb = 0x0800,
> + .dp_phy = 0x0000,
> +};
> +
> +static const struct qmp_phy_usb_cfg msm8998_usb3phy_cfg = {
> + .offsets = &qmp_usbc_usb_offsets_v3_qcm2290,
>
> .serdes_tbl = msm8998_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
> @@ -417,13 +494,13 @@ static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
> .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
> .pcs_tbl = msm8998_usb3_pcs_tbl,
> .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .vreg_list = qmp_phy_usb_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_usb_vreg_l),
> .regs = qmp_v3_usb3phy_regs_layout,
> };
>
> -static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> - .offsets = &qmp_usbc_offsets_v3_qcm2290,
> +static const struct qmp_phy_usb_cfg qcm2290_usb3phy_cfg = {
> + .offsets = &qmp_usbc_usb_offsets_v3_qcm2290,
>
> .serdes_tbl = qcm2290_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
> @@ -433,13 +510,13 @@ static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = {
> .rx_tbl_num = ARRAY_SIZE(qcm2290_usb3_rx_tbl),
> .pcs_tbl = qcm2290_usb3_pcs_tbl,
> .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .vreg_list = qmp_phy_usb_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_usb_vreg_l),
> .regs = qmp_v3_usb3phy_regs_layout_qcm2290,
> };
>
> -static const struct qmp_phy_cfg sdm660_usb3phy_cfg = {
> - .offsets = &qmp_usbc_offsets_v3_qcm2290,
> +static const struct qmp_phy_usb_cfg sdm660_usb3phy_cfg = {
> + .offsets = &qmp_usbc_usb_offsets_v3_qcm2290,
>
> .serdes_tbl = qcm2290_usb3_serdes_tbl,
> .serdes_tbl_num = ARRAY_SIZE(qcm2290_usb3_serdes_tbl),
> @@ -449,20 +526,352 @@ static const struct qmp_phy_cfg sdm660_usb3phy_cfg = {
> .rx_tbl_num = ARRAY_SIZE(sdm660_usb3_rx_tbl),
> .pcs_tbl = qcm2290_usb3_pcs_tbl,
> .pcs_tbl_num = ARRAY_SIZE(qcm2290_usb3_pcs_tbl),
> - .vreg_list = qmp_phy_vreg_l,
> - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
> + .vreg_list = qmp_phy_usb_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_usb_vreg_l),
> .regs = qmp_v3_usb3phy_regs_layout_qcm2290,
> };
>
> -static int qmp_usbc_init(struct phy *phy)
> +static const u8 qmp_dp_pre_emphasis_hbr2_rbr[4][4] = {
> + {0x00, 0x0B, 0x12, 0xFF}, /* pe0, 0 db */
> + {0x00, 0x0A, 0x12, 0xFF}, /* pe1, 3.5 db */
> + {0x00, 0x0C, 0xFF, 0xFF}, /* pe2, 6.0 db */
> + {0xFF, 0xFF, 0xFF, 0xFF} /* pe3, 9.5 db */
> +};
> +
> +static const u8 qmp_dp_voltage_swing_hbr2_rbr[4][4] = {
> + {0x07, 0x0F, 0x14, 0xFF}, /* sw0, 0.4v */
> + {0x11, 0x1D, 0x1F, 0xFF}, /* sw1, 0.6 v */
> + {0x18, 0x1F, 0xFF, 0xFF}, /* sw1, 0.8 v */
> + {0xFF, 0xFF, 0xFF, 0xFF} /* sw1, 1.2 v, optional */
> +};
> +
> +static int qcs615_qmp_dp_aux_init(struct qmp_usbc *qmp);
> +static int qcs615_qmp_configure_dp_serdes(struct qmp_usbc *qmp);
> +static int qcs615_qmp_configure_dp_voltages(struct qmp_usbc *qmp);
> +static int qcs615_qmp_configure_dp_phy(struct qmp_usbc *qmp);
> +static int qcs615_qmp_calibrate_dp_phy(struct qmp_usbc *qmp);
Are those functions really platform-specific?
> +
> +static void qmp_usbc_check_dp_phy(struct qmp_usbc *qmp, const char *pos);
> +
> +static const struct qmp_phy_dp_cfg qcs615_dpphy_cfg = {
> + .offsets = &qmp_usbc_dp_offsets_qcs615,
> +
> + .swing_tbl = &qmp_dp_voltage_swing_hbr2_rbr,
> + .pre_emphasis_tbl = &qmp_dp_pre_emphasis_hbr2_rbr,
> +
> + .dp_aux_init = qcs615_qmp_dp_aux_init,
> + .configure_dp_serdes = qcs615_qmp_configure_dp_serdes,
> + .configure_dp_voltages = qcs615_qmp_configure_dp_voltages,
> + .configure_dp_phy = qcs615_qmp_configure_dp_phy,
> + .calibrate_dp_phy = qcs615_qmp_calibrate_dp_phy,
> +
> + .vreg_list = qmp_phy_dp_vreg_l,
> + .num_vregs = ARRAY_SIZE(qmp_phy_dp_vreg_l),
> +};
> +
> +#define to_usb_cfg(x) ((struct qmp_phy_usb_cfg *)(x->cfg))
> +#define to_dp_cfg(x) ((struct qmp_phy_dp_cfg *)(x->cfg))
> +#define to_usb_layout(x) ((struct qmp_phy_usb_layout *)(x->layout))
> +#define to_dp_layout(x) ((struct qmp_phy_dp_layout *)(x->layout))
> +
> +static int qcs615_qmp_dp_aux_init(struct qmp_usbc *qmp)
> +{
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> +
> + regmap_write(layout->tcsr_map, layout->dp_phy_mode, 0x1);
> +
> + writel(DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN,
> + layout->dp_phy + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN,
> + layout->dp_phy + QSERDES_DP_PHY_PD_CTL);
> +
> + writel(0x00, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG0);
> + writel(0x13, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG1);
> + writel(0x00, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG2);
> + writel(0x00, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG3);
> + writel(0x0a, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG4);
> + writel(0x26, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG5);
> + writel(0x0a, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG6);
> + writel(0x03, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG7);
> + writel(0xbb, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG8);
> + writel(0x03, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG9);
> + layout->dp_aux_cfg = 0;
> +
> + writel(PHY_AUX_STOP_ERR_MASK | PHY_AUX_DEC_ERR_MASK |
> + PHY_AUX_SYNC_ERR_MASK | PHY_AUX_ALIGN_ERR_MASK |
> + PHY_AUX_REQ_ERR_MASK,
> + layout->dp_phy + QSERDES_V3_DP_PHY_AUX_INTERRUPT_MASK);
> + return 0;
> +}
We've had DP PHY implementation in QMP Combo PHY and in eDP PHY.
Please review them and work on extracting common bits into some kind
of a library. At least -combo and your -usbc implementation seem close
enough to warrant common library code.
> +
> +static int qcs615_qmp_configure_dp_serdes(struct qmp_usbc *qmp)
> +{
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> + void __iomem *serdes = layout->dp_serdes;
> + const struct phy_configure_opts_dp *dp_opts = &layout->dp_opts;
> + u8 hsclk_sel;
> + u8 dec_start_mode0;
> + u8 div_frac_start1_mode0;
> + u8 div_frac_start2_mode0;
> + u8 div_frac_start3_mode0;
> + u8 lock_cmp1_mode0;
> + u8 lock_cmp2_mode0;
> + u8 lock_cmp3_mode0;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + hsclk_sel = 0x2c;
> + dec_start_mode0 = 0x69;
> + div_frac_start1_mode0 = 0x00;
> + div_frac_start2_mode0 = 0x80;
> + div_frac_start3_mode0 = 0x07;
> + lock_cmp1_mode0 = 0xbf;
> + lock_cmp2_mode0 = 0x21;
> + lock_cmp3_mode0 = 0x00;
> + break;
> + case 2700:
> + hsclk_sel = 0x24;
> + dec_start_mode0 = 0x69;
> + div_frac_start1_mode0 = 0x00;
> + div_frac_start2_mode0 = 0x80;
> + div_frac_start3_mode0 = 0x07;
> + lock_cmp1_mode0 = 0x3f;
> + lock_cmp2_mode0 = 0x38;
> + lock_cmp3_mode0 = 0x00;
> + break;
> + case 5400:
> + hsclk_sel = 0x20;
> + dec_start_mode0 = 0x8c;
> + div_frac_start1_mode0 = 0x00;
> + div_frac_start2_mode0 = 0x00;
> + div_frac_start3_mode0 = 0x0a;
> + lock_cmp1_mode0 = 0x7f;
> + lock_cmp2_mode0 = 0x70;
> + lock_cmp3_mode0 = 0x00;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> +
> + writel(0x01, serdes + QSERDES_COM_SVS_MODE_CLK_SEL);
> + writel(0x37, serdes + QSERDES_COM_SYSCLK_EN_SEL);
> + writel(0x00, serdes + QSERDES_COM_CLK_SELECT);
> + writel(0x06, serdes + QSERDES_COM_SYS_CLK_CTRL);
> + writel(0x3f, serdes + QSERDES_COM_BIAS_EN_CLKBUFLR_EN);
> + writel(0x0e, serdes + QSERDES_COM_CLK_ENABLE1);
> + writel(0x0f, serdes + QSERDES_COM_BG_CTRL);
> + writel(0x06, serdes + QSERDES_COM_SYSCLK_BUF_ENABLE);
> + writel(0x30, serdes + QSERDES_COM_CLK_SELECT);
> + writel(0x0f, serdes + QSERDES_COM_PLL_IVCO);
> + writel(0x28, serdes + QSERDES_COM_PLL_CCTRL_MODE0);
> + writel(0x16, serdes + QSERDES_COM_PLL_RCTRL_MODE0);
> + writel(0x0b, serdes + QSERDES_COM_CP_CTRL_MODE0);
> +
> + writel(hsclk_sel, serdes + QSERDES_COM_HSCLK_SEL);
> + writel(dec_start_mode0, serdes + QSERDES_COM_DEC_START_MODE0);
> + writel(div_frac_start1_mode0, serdes + QSERDES_COM_DIV_FRAC_START1_MODE0);
> + writel(div_frac_start2_mode0, serdes + QSERDES_COM_DIV_FRAC_START2_MODE0);
> + writel(div_frac_start3_mode0, serdes + QSERDES_COM_DIV_FRAC_START3_MODE0);
> + writel(lock_cmp1_mode0, serdes + QSERDES_COM_LOCK_CMP1_MODE0);
> + writel(lock_cmp2_mode0, serdes + QSERDES_COM_LOCK_CMP2_MODE0);
> + writel(lock_cmp3_mode0, serdes + QSERDES_COM_LOCK_CMP3_MODE0);
> +
> + writel(0x40, serdes + QSERDES_COM_INTEGLOOP_GAIN0_MODE0);
> + writel(0x00, serdes + QSERDES_COM_INTEGLOOP_GAIN1_MODE0);
> + writel(0x00, serdes + QSERDES_COM_VCO_TUNE_MAP);
> + writel(0x08, serdes + QSERDES_COM_BG_TIMER);
> + writel(0x05, serdes + QSERDES_COM_CORECLK_DIV);
> + writel(0x00, serdes + QSERDES_COM_VCO_TUNE_CTRL);
> + writel(0x00, serdes + QSERDES_COM_VCO_TUNE1_MODE0);
> + writel(0x00, serdes + QSERDES_COM_VCO_TUNE2_MODE0);
> + writel(0x00, serdes + QSERDES_COM_VCO_TUNE_CTRL);
> +
> + writel(0x0f, serdes + QSERDES_COM_CORE_CLK_EN);
> +
> + return 0;
> +}
> +
> +static int qcs615_qmp_configure_dp_voltages(struct qmp_usbc *qmp)
> +{
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> + struct qmp_phy_dp_cfg *cfg = to_dp_cfg(qmp);
> + const struct phy_configure_opts_dp *dp_opts = &layout->dp_opts;
> + void __iomem *tx = layout->dp_tx;
> + void __iomem *tx2 = layout->dp_tx2;
> + unsigned int v_level = 0, p_level = 0;
> + u8 voltage_swing_cfg, pre_emphasis_cfg;
> + int i;
> +
> + if (dp_opts->lanes > 4) {
> + dev_err(qmp->dev, "Invalid lane_num(%d)\n", dp_opts->lanes);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < dp_opts->lanes; i++) {
> + v_level = max(v_level, dp_opts->voltage[i]);
> + p_level = max(p_level, dp_opts->pre[i]);
> + }
> +
> + if ((v_level > 4) || (pre_emphasis_cfg > 4)) {
> + dev_err(qmp->dev, "Invalid v(%d) | p(%d) level)\n",
> + v_level, pre_emphasis_cfg);
> + return -EINVAL;
> + }
> +
> + voltage_swing_cfg = (*cfg->swing_tbl)[v_level][p_level];
> + pre_emphasis_cfg = (*cfg->pre_emphasis_tbl)[v_level][p_level];
> +
> + /* Enable MUX to use Cursor values from these registers */
> + voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> + pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> +
> + if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> + return -EINVAL;
> +
> + /* program default setting first */
> + writel(0x2A, tx + QSERDES_V3_TX_TX_DRV_LVL);
> + writel(0x20, tx + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> + writel(0x2A, tx2 + QSERDES_V3_TX_TX_DRV_LVL);
> + writel(0x20, tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL);
Lowercase all hex numbers.
> +
> + writel(voltage_swing_cfg, tx + QSERDES_V3_TX_TX_DRV_LVL);
> + writel(pre_emphasis_cfg, tx + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> + writel(voltage_swing_cfg, tx2 + QSERDES_V3_TX_TX_DRV_LVL);
> + writel(pre_emphasis_cfg, tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> +
> + return 0;
> +}
> +
> +static int qcs615_qmp_configure_dp_phy(struct qmp_usbc *qmp)
> +{
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> + u32 status;
> +
> + writel(0x01, layout->dp_phy + QSERDES_DP_PHY_CFG);
> + writel(0x05, layout->dp_phy + QSERDES_DP_PHY_CFG);
> + writel(0x01, layout->dp_phy + QSERDES_DP_PHY_CFG);
> + writel(0x09, layout->dp_phy + QSERDES_DP_PHY_CFG);
> +
> + writel(0x20, layout->dp_serdes + QSERDES_COM_RESETSM_CNTRL);
> +
> + // C_READY
> + if (readl_poll_timeout(layout->dp_serdes + QSERDES_COM_C_READY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000)) {
> + dev_err(qmp->dev, "C_READY not ready\n");
> + return -ETIMEDOUT;
> + }
> +
> + // FREQ_DONE
> + if (readl_poll_timeout(layout->dp_serdes + QSERDES_COM_CMN_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000)){
> + dev_err(qmp->dev, "FREQ_DONE not ready\n");
> + return -ETIMEDOUT;
> + }
> +
> + // PLL_LOCKED
> + if (readl_poll_timeout(layout->dp_serdes + QSERDES_COM_CMN_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000)){
> + dev_err(qmp->dev, "PLL_LOCKED not ready\n");
> + return -ETIMEDOUT;
> + }
> +
> + writel(0x19, layout->dp_phy + QSERDES_DP_PHY_CFG);
> + udelay(10);
> +
> + // TSYNC_DONE
> + if (readl_poll_timeout(layout->dp_phy + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(0)) > 0),
> + 500,
> + 10000)){
> + dev_err(qmp->dev, "TSYNC_DONE not ready\n");
> + return -ETIMEDOUT;
> + }
> +
> + // PHY_READY
> + if (readl_poll_timeout(layout->dp_phy + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000)){
> + dev_err(qmp->dev, "PHY_READY not ready\n");
> + return -ETIMEDOUT;
> + }
> +
> + writel(0x3f, layout->dp_tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> + writel(0x10, layout->dp_tx + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(0x0a, layout->dp_tx + QSERDES_V3_TX_TX_POL_INV);
> + writel(0x3f, layout->dp_tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> + writel(0x10, layout->dp_tx2 + QSERDES_V3_TX_HIGHZ_DRVR_EN);
> + writel(0x0a, layout->dp_tx2 + QSERDES_V3_TX_TX_POL_INV);
> +
> + writel(0x18, layout->dp_phy + QSERDES_DP_PHY_CFG);
> + writel(0x19, layout->dp_phy + QSERDES_DP_PHY_CFG);
> +
> + if (readl_poll_timeout(layout->dp_phy + QSERDES_V3_DP_PHY_STATUS,
> + status,
> + ((status & BIT(1)) > 0),
> + 500,
> + 10000)){
> + dev_err(qmp->dev, "PHY_READY not ready\n");
> + return -ETIMEDOUT;
> + }
> +
> + return 0;
> +}
> +
> +static int qcs615_qmp_calibrate_dp_phy(struct qmp_usbc *qmp)
> +{
> + static const u8 cfg1_settings[] = {0x13, 0x23, 0x1d};
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> + u8 val;
> +
> + layout->dp_aux_cfg++;
> + layout->dp_aux_cfg %= ARRAY_SIZE(cfg1_settings);
> + val = cfg1_settings[layout->dp_aux_cfg];
> +
> + writel(val, layout->dp_phy + QSERDES_DP_PHY_AUX_CFG1);
> +
> + qmp_usbc_check_dp_phy(qmp, "pos_calibrate");
> +
> + return 0;
> +}
> +
> +static int qmp_usbc_com_init(struct phy *phy)
> {
> struct qmp_usbc *qmp = phy_get_drvdata(phy);
> - const struct qmp_phy_cfg *cfg = qmp->cfg;
> - void __iomem *pcs = qmp->pcs;
> + int num_vregs;
> u32 val = 0;
> int ret;
> + unsigned int reg_pwr_dn;
>
> - ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
> + if (qmp->type == QMP_PHY_USBC_USB) {
> + struct qmp_phy_usb_cfg *cfg = to_usb_cfg(qmp);
> +
> + num_vregs = cfg->num_vregs;
> + reg_pwr_dn = cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL];
> + } else {
> + struct qmp_phy_dp_cfg *cfg = to_dp_cfg(qmp);
> +
> + num_vregs = cfg->num_vregs;
> + }
> +
> + ret = regulator_bulk_enable(num_vregs, qmp->vregs);
> if (ret) {
> dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
> return ret;
> @@ -484,73 +893,85 @@ static int qmp_usbc_init(struct phy *phy)
> if (ret)
> goto err_assert_reset;
>
> - qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
> -
> -#define SW_PORTSELECT_VAL BIT(0)
> -#define SW_PORTSELECT_MUX BIT(1)
> /* Use software based port select and switch on typec orientation */
> val = SW_PORTSELECT_MUX;
> if (qmp->orientation == TYPEC_ORIENTATION_REVERSE)
> val |= SW_PORTSELECT_VAL;
> - writel(val, qmp->pcs_misc);
> +
> + if (qmp->type == QMP_PHY_USBC_USB) {
Why?
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
> +
> + qphy_setbits(layout->pcs, reg_pwr_dn, SW_PWRDN);
> + writel(val, layout->pcs_misc);
> + }
>
> return 0;
>
> err_assert_reset:
> reset_control_bulk_assert(qmp->num_resets, qmp->resets);
> err_disable_regulators:
> - regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> + regulator_bulk_disable(num_vregs, qmp->vregs);
>
> return ret;
> }
>
> -static int qmp_usbc_exit(struct phy *phy)
> +static int qmp_usbc_com_exit(struct phy *phy)
> {
> struct qmp_usbc *qmp = phy_get_drvdata(phy);
> - const struct qmp_phy_cfg *cfg = qmp->cfg;
> + int num_vregs;
>
> reset_control_bulk_assert(qmp->num_resets, qmp->resets);
>
> clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
>
> - regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> + if (qmp->type == QMP_PHY_USBC_USB) {
> + struct qmp_phy_usb_cfg *cfg = to_usb_cfg(qmp);
> +
> + num_vregs = cfg->num_vregs;
> + } else {
> + struct qmp_phy_dp_cfg *cfg = to_dp_cfg(qmp);
> +
> + num_vregs = cfg->num_vregs;
> + }
> + regulator_bulk_disable(num_vregs, qmp->vregs);
>
> return 0;
> }
>
> -static int qmp_usbc_power_on(struct phy *phy)
> +static int qmp_usbc_usb_power_on(struct phy *phy)
> {
> struct qmp_usbc *qmp = phy_get_drvdata(phy);
> - const struct qmp_phy_cfg *cfg = qmp->cfg;
> + const struct qmp_phy_usb_cfg *cfg = to_usb_cfg(qmp);
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
> void __iomem *status;
> unsigned int val;
> int ret;
>
> - qmp_configure(qmp->dev, qmp->serdes, cfg->serdes_tbl,
> + qmp_configure(qmp->dev, layout->serdes, cfg->serdes_tbl,
> cfg->serdes_tbl_num);
>
> - ret = clk_prepare_enable(qmp->pipe_clk);
> + ret = clk_prepare_enable(layout->pipe_clk);
> if (ret) {
> dev_err(qmp->dev, "pipe_clk enable failed err=%d\n", ret);
> return ret;
> }
>
> /* Tx, Rx, and PCS configurations */
> - qmp_configure_lane(qmp->dev, qmp->tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
> - qmp_configure_lane(qmp->dev, qmp->rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
> + qmp_configure_lane(qmp->dev, layout->tx, cfg->tx_tbl, cfg->tx_tbl_num, 1);
> + qmp_configure_lane(qmp->dev, layout->rx, cfg->rx_tbl, cfg->rx_tbl_num, 1);
>
> - qmp_configure_lane(qmp->dev, qmp->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
> - qmp_configure_lane(qmp->dev, qmp->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
> + qmp_configure_lane(qmp->dev, layout->tx2, cfg->tx_tbl, cfg->tx_tbl_num, 2);
> + qmp_configure_lane(qmp->dev, layout->rx2, cfg->rx_tbl, cfg->rx_tbl_num, 2);
>
> - qmp_configure(qmp->dev, qmp->pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
> + qmp_configure(qmp->dev, layout->pcs, cfg->pcs_tbl, cfg->pcs_tbl_num);
>
> /* Pull PHY out of reset state */
> - qphy_clrbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> + qphy_clrbits(layout->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>
> /* start SerDes and Phy-Coding-Sublayer */
> - qphy_setbits(qmp->pcs, cfg->regs[QPHY_START_CTRL], SERDES_START | PCS_START);
> + qphy_setbits(layout->pcs, cfg->regs[QPHY_START_CTRL], SERDES_START | PCS_START);
>
> - status = qmp->pcs + cfg->regs[QPHY_PCS_STATUS];
> + status = layout->pcs + cfg->regs[QPHY_PCS_STATUS];
> ret = readl_poll_timeout(status, val, !(val & PHYSTATUS), 200,
> PHY_INIT_COMPLETE_TIMEOUT);
> if (ret) {
> @@ -561,92 +982,348 @@ static int qmp_usbc_power_on(struct phy *phy)
> return 0;
>
> err_disable_pipe_clk:
> - clk_disable_unprepare(qmp->pipe_clk);
> + clk_disable_unprepare(layout->pipe_clk);
>
> return ret;
> }
>
> -static int qmp_usbc_power_off(struct phy *phy)
> +static int qmp_usbc_usb_power_off(struct phy *phy)
> {
> struct qmp_usbc *qmp = phy_get_drvdata(phy);
> - const struct qmp_phy_cfg *cfg = qmp->cfg;
> + const struct qmp_phy_usb_cfg *cfg = to_usb_cfg(qmp);
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
>
> - clk_disable_unprepare(qmp->pipe_clk);
> + clk_disable_unprepare(layout->pipe_clk);
>
> /* PHY reset */
> - qphy_setbits(qmp->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
> + qphy_setbits(layout->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>
> /* stop SerDes and Phy-Coding-Sublayer */
> - qphy_clrbits(qmp->pcs, cfg->regs[QPHY_START_CTRL],
> + qphy_clrbits(layout->pcs, cfg->regs[QPHY_START_CTRL],
> SERDES_START | PCS_START);
>
> /* Put PHY into POWER DOWN state: active low */
> - qphy_clrbits(qmp->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> + qphy_clrbits(layout->pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL],
> SW_PWRDN);
>
> return 0;
> }
>
> -static int qmp_usbc_enable(struct phy *phy)
> +static int qmp_usbc_usb_enable(struct phy *phy)
> {
> struct qmp_usbc *qmp = phy_get_drvdata(phy);
> int ret;
>
> mutex_lock(&qmp->phy_mutex);
>
> - ret = qmp_usbc_init(phy);
> + ret = qmp_usbc_com_init(phy);
> if (ret)
> goto out_unlock;
>
> - ret = qmp_usbc_power_on(phy);
> + ret = qmp_usbc_usb_power_on(phy);
> if (ret) {
> - qmp_usbc_exit(phy);
> + qmp_usbc_com_exit(phy);
> goto out_unlock;
> }
>
> - qmp->usb_init_count++;
> + qmp->init_count++;
> out_unlock:
> mutex_unlock(&qmp->phy_mutex);
>
> return ret;
> }
>
> -static int qmp_usbc_disable(struct phy *phy)
> +static int qmp_usbc_usb_disable(struct phy *phy)
> {
> struct qmp_usbc *qmp = phy_get_drvdata(phy);
> int ret;
>
> - qmp->usb_init_count--;
> - ret = qmp_usbc_power_off(phy);
> + qmp->init_count--;
> + ret = qmp_usbc_usb_power_off(phy);
> if (ret)
> return ret;
> - return qmp_usbc_exit(phy);
> + return qmp_usbc_com_exit(phy);
> +}
> +
> +static int qmp_usbc_usb_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +{
> + struct qmp_usbc *qmp = phy_get_drvdata(phy);
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
> +
> + layout->mode = mode;
> +
> + return 0;
> +}
> +
> +static int qmp_usbc_dp_init(struct phy *phy)
> +{
> + struct qmp_usbc *qmp = phy_get_drvdata(phy);
> + const struct qmp_phy_dp_cfg *cfg = to_dp_cfg(qmp);
> + int ret;
> +
> + if (qmp->init_count) {
> + dev_err(qmp->dev, "type(%d) inited(%d)\n", qmp->type, qmp->init_count);
> + return 0;
> + }
> +
> + mutex_lock(&qmp->phy_mutex);
> +
> + ret = qmp_usbc_com_init(phy);
> + if (ret) {
> + dev_err(qmp->dev, "type(%d) com_init fail\n", qmp->type);
> + goto dp_init_unlock;
> + }
> +
> + cfg->dp_aux_init(qmp);
> +
> + qmp->init_count++;
> +
> +dp_init_unlock:
> + mutex_unlock(&qmp->phy_mutex);
> + return ret;
> +}
> +
> +static int qmp_usbc_dp_exit(struct phy *phy)
> +{
> + struct qmp_usbc *qmp = phy_get_drvdata(phy);
> +
> + mutex_lock(&qmp->phy_mutex);
> +
> + qmp_usbc_com_exit(phy);
> +
> + qmp->init_count--;
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +}
> +
> +static int qmp_usbc_dp_configure(struct phy *phy, union phy_configure_opts *opts)
> +{
> + const struct phy_configure_opts_dp *dp_opts = &opts->dp;
> + struct qmp_usbc *qmp = phy_get_drvdata(phy);
> + struct qmp_phy_dp_cfg *cfg = to_dp_cfg(qmp);
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> + int ret;
> +
> + mutex_lock(&qmp->phy_mutex);
> +
> + memcpy(&layout->dp_opts, dp_opts, sizeof(*dp_opts));
> + if (layout->dp_opts.set_voltages) {
> + ret = cfg->configure_dp_voltages(qmp);
> + if (ret) {
> + dev_err(qmp->dev, "type(%d) err(%d)\n", qmp->type, ret);
> + mutex_unlock(&qmp->phy_mutex);
> + return ret;
> + }
> +
> + layout->dp_opts.set_voltages = 0;
> + }
> +
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return 0;
> +}
> +
> +static int qmp_usbc_dp_calibrate(struct phy *phy)
> +{
> + struct qmp_usbc *qmp = phy_get_drvdata(phy);
> + struct qmp_phy_dp_cfg *cfg = to_dp_cfg(qmp);
> + int ret = 0;
> +
> + mutex_lock(&qmp->phy_mutex);
> +
> + if (cfg->calibrate_dp_phy) {
> + ret = cfg->calibrate_dp_phy(qmp);
> + if (ret) {
> + dev_err(qmp->dev, "type(%d) err(%d)\n", qmp->type, ret);
> + mutex_unlock(&qmp->phy_mutex);
> + return ret;
> + }
> + }
> +
> + mutex_unlock(&qmp->phy_mutex);
> + return 0;
> }
>
> -static int qmp_usbc_set_mode(struct phy *phy, enum phy_mode mode, int submode)
> +static int qmp_usbc_configure_dp_clocks(struct qmp_usbc *qmp)
> +{
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> + const struct phy_configure_opts_dp *dp_opts = &layout->dp_opts;
> + u32 phy_vco_div;
> + unsigned long pixel_freq;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + phy_vco_div = 0x1;
> + pixel_freq = 1620000000UL / 2;
> + break;
> + case 2700:
> + phy_vco_div = 0x1;
> + pixel_freq = 2700000000UL / 2;
> + break;
> + case 5400:
> + phy_vco_div = 0x2;
> + pixel_freq = 5400000000UL / 4;
> + break;
> + case 8100:
> + phy_vco_div = 0x0;
> + pixel_freq = 8100000000UL / 6;
> + break;
> + default:
> + /* Other link rates aren't supported */
> + return -EINVAL;
> + }
> + writel(phy_vco_div, layout->dp_phy + QSERDES_DP_PHY_VCO_DIV);
> +
> + clk_set_rate(layout->dp_link_hw.clk, dp_opts->link_rate * 100000);
> + clk_set_rate(layout->dp_pixel_hw.clk, pixel_freq);
> +
> + return 0;
> +}
> +
> +static void qmp_usbc_check_dp_phy(struct qmp_usbc *qmp, const char *pos)
> +{
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> + u8 c_ready, cmn_status, phy_status;
> +
> + c_ready = readl(layout->dp_serdes + QSERDES_COM_C_READY_STATUS);
> + cmn_status = readl(layout->dp_serdes + QSERDES_COM_CMN_STATUS);
> + phy_status = readl(layout->dp_phy + QSERDES_V3_DP_PHY_STATUS);
> +
> + dev_dbg(qmp->dev, "pos(%s) c_ready(0x%x) cmn_status(0x%x) phy_status(0x%x)\n",
> + pos, c_ready, cmn_status, phy_status);
> +}
> +
> +static int qmp_usbc_dp_power_on(struct phy *phy)
> +{
> + struct qmp_usbc *qmp = phy_get_drvdata(phy);
> + const struct qmp_phy_dp_cfg *cfg = to_dp_cfg(qmp);
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> + const struct phy_configure_opts_dp *dp_opts = &layout->dp_opts;
> + bool reverse = (qmp->orientation == TYPEC_ORIENTATION_REVERSE);
> + void __iomem *tx = layout->dp_tx;
> + void __iomem *tx2 = layout->dp_tx2;
> + u8 lane_mode_1;
> + int ret = 0;
> +
> + mutex_lock(&qmp->phy_mutex);
> +
> + writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> + DP_PHY_PD_CTL_LANE_0_1_PWRDN | DP_PHY_PD_CTL_LANE_2_3_PWRDN |
> + DP_PHY_PD_CTL_PLL_PWRDN,
> + layout->dp_phy + QSERDES_DP_PHY_PD_CTL);
> +
> + ret = cfg->configure_dp_serdes(qmp);
> + if (ret) {
> + dev_err(qmp->dev, "failed to config pll\n");
> + goto power_on_unlock;
> + }
> +
> + if (dp_opts->link_rate >= 2700)
> + lane_mode_1 = 0xc4;
> + else
> + lane_mode_1 = 0xc6;
> +
> + writel(lane_mode_1, tx + QSERDES_V3_TX_LANE_MODE_1);
> + writel(lane_mode_1, tx2 + QSERDES_V3_TX_LANE_MODE_1);
> +
> + if (reverse)
> + writel(0xc9, layout->dp_phy + QSERDES_DP_PHY_MODE);
> + else
> + writel(0xd9, layout->dp_phy + QSERDES_DP_PHY_MODE);
> +
> + writel(0x05, layout->dp_phy + QSERDES_V3_DP_PHY_TX0_TX1_LANE_CTL);
> + writel(0x05, layout->dp_phy + QSERDES_V3_DP_PHY_TX2_TX3_LANE_CTL);
> +
> + writel(0x1a, tx + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> + writel(0x40, tx + QSERDES_V3_TX_VMODE_CTRL1);
> + writel(0x30, tx + QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN);
> + writel(0x3d, tx + QSERDES_V3_TX_INTERFACE_SELECT);
> + writel(0x0f, tx + QSERDES_V3_TX_CLKBUF_ENABLE);
> + writel(0x03, tx + QSERDES_V3_TX_RESET_TSYNC_EN);
> + writel(0x03, tx + QSERDES_V3_TX_TRAN_DRVR_EMP_EN);
> + writel(0x00, tx + QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN);
> + writel(0x00, tx + QSERDES_V3_TX_TX_INTERFACE_MODE);
> + writel(0x2b, tx + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> + writel(0x2f, tx + QSERDES_V3_TX_TX_DRV_LVL);
> + writel(0x04, tx + QSERDES_V3_TX_TX_BAND);
> + writel(0x12, tx + QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX);
> + writel(0x12, tx + QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX);
> +
> + writel(0x1a, tx2 + QSERDES_V3_TX_TRANSCEIVER_BIAS_EN);
> + writel(0x40, tx2 + QSERDES_V3_TX_VMODE_CTRL1);
> + writel(0x30, tx2 + QSERDES_V3_TX_PRE_STALL_LDO_BOOST_EN);
> + writel(0x3d, tx2 + QSERDES_V3_TX_INTERFACE_SELECT);
> + writel(0x0f, tx2 + QSERDES_V3_TX_CLKBUF_ENABLE);
> + writel(0x03, tx2 + QSERDES_V3_TX_RESET_TSYNC_EN);
> + writel(0x03, tx2 + QSERDES_V3_TX_TRAN_DRVR_EMP_EN);
> + writel(0x00, tx2 + QSERDES_V3_TX_PARRATE_REC_DETECT_IDLE_EN);
> + writel(0x00, tx2 + QSERDES_V3_TX_TX_INTERFACE_MODE);
> + writel(0x2b, tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL);
> + writel(0x2f, tx2 + QSERDES_V3_TX_TX_DRV_LVL);
> + writel(0x04, tx2 + QSERDES_V3_TX_TX_BAND);
> + writel(0x12, tx2 + QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX);
> + writel(0x12, tx2 + QSERDES_V3_TX_RES_CODE_LANE_OFFSET_RX);
> +
> + writel(0x02, layout->dp_serdes + QSERDES_COM_CMN_CONFIG);
> + qmp_usbc_configure_dp_clocks(qmp);
> +
> + ret = cfg->configure_dp_phy(qmp);
> + if (ret) {
> + dev_err(qmp->dev, "failed to config dp phy\n");
> + goto power_on_unlock;
> + }
> +
> + qmp_usbc_check_dp_phy(qmp, "usbc_dp_power_on_finish");
> +
> +power_on_unlock:
> + mutex_unlock(&qmp->phy_mutex);
> +
> + return ret;
> +}
> +
> +static int qmp_usbc_dp_power_off(struct phy *phy)
> {
> struct qmp_usbc *qmp = phy_get_drvdata(phy);
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> +
> + mutex_lock(&qmp->phy_mutex);
>
> - qmp->mode = mode;
> + /* Assert DP PHY power down */
> + writel(DP_PHY_PD_CTL_PSR_PWRDN, layout->dp_phy + QSERDES_DP_PHY_PD_CTL);
> +
> + mutex_unlock(&qmp->phy_mutex);
>
> return 0;
> }
>
> -static const struct phy_ops qmp_usbc_phy_ops = {
> - .init = qmp_usbc_enable,
> - .exit = qmp_usbc_disable,
> - .set_mode = qmp_usbc_set_mode,
> +static const struct phy_ops qmp_usbc_usb_phy_ops = {
> + .init = qmp_usbc_usb_enable,
> + .exit = qmp_usbc_usb_disable,
> + .set_mode = qmp_usbc_usb_set_mode,
> + .owner = THIS_MODULE,
> +};
> +
> +static const struct phy_ops qmp_usbc_dp_phy_ops = {
> + .init = qmp_usbc_dp_init,
> + .exit = qmp_usbc_dp_exit,
> + .configure = qmp_usbc_dp_configure,
> + .calibrate = qmp_usbc_dp_calibrate,
> + .power_on = qmp_usbc_dp_power_on,
> + .power_off = qmp_usbc_dp_power_off,
> .owner = THIS_MODULE,
> };
>
> static void qmp_usbc_enable_autonomous_mode(struct qmp_usbc *qmp)
> {
> - const struct qmp_phy_cfg *cfg = qmp->cfg;
> - void __iomem *pcs = qmp->pcs;
> + const struct qmp_phy_usb_cfg *cfg = to_usb_cfg(qmp);
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
> + void __iomem *pcs = layout->pcs;
> u32 intr_mask;
>
> - if (qmp->mode == PHY_MODE_USB_HOST_SS ||
> - qmp->mode == PHY_MODE_USB_DEVICE_SS)
> + if (layout->mode == PHY_MODE_USB_HOST_SS ||
> + layout->mode == PHY_MODE_USB_DEVICE_SS)
> intr_mask = ARCVR_DTCT_EN | ALFPS_DTCT_EN;
> else
> intr_mask = ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL;
> @@ -663,18 +1340,19 @@ static void qmp_usbc_enable_autonomous_mode(struct qmp_usbc *qmp)
> qphy_setbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL], intr_mask);
>
> /* Enable i/o clamp_n for autonomous mode */
> - if (qmp->tcsr_map && qmp->vls_clamp_reg)
> - regmap_write(qmp->tcsr_map, qmp->vls_clamp_reg, 1);
> + if (layout->tcsr_map && layout->vls_clamp_reg)
> + regmap_write(layout->tcsr_map, layout->vls_clamp_reg, 1);
> }
>
> static void qmp_usbc_disable_autonomous_mode(struct qmp_usbc *qmp)
> {
> - const struct qmp_phy_cfg *cfg = qmp->cfg;
> - void __iomem *pcs = qmp->pcs;
> + const struct qmp_phy_usb_cfg *cfg = to_usb_cfg(qmp);
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
> + void __iomem *pcs = layout->pcs;
>
> /* Disable i/o clamp_n on resume for normal mode */
> - if (qmp->tcsr_map && qmp->vls_clamp_reg)
> - regmap_write(qmp->tcsr_map, qmp->vls_clamp_reg, 0);
> + if (layout->tcsr_map && layout->vls_clamp_reg)
> + regmap_write(layout->tcsr_map, layout->vls_clamp_reg, 0);
>
> qphy_clrbits(pcs, cfg->regs[QPHY_PCS_AUTONOMOUS_MODE_CTRL],
> ARCVR_DTCT_EN | ARCVR_DTCT_EVENT_SEL | ALFPS_DTCT_EN);
> @@ -688,16 +1366,19 @@ static int __maybe_unused qmp_usbc_runtime_suspend(struct device *dev)
> {
> struct qmp_usbc *qmp = dev_get_drvdata(dev);
>
> - dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qmp->mode);
> -
> if (!qmp->phy->init_count) {
> dev_vdbg(dev, "PHY not initialized, bailing out\n");
> return 0;
> }
>
> - qmp_usbc_enable_autonomous_mode(qmp);
> + if (qmp->type == QMP_PHY_USBC_USB) {
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
> +
> + dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", layout->mode);
> + qmp_usbc_enable_autonomous_mode(qmp);
> + clk_disable_unprepare(layout->pipe_clk);
> + }
>
> - clk_disable_unprepare(qmp->pipe_clk);
> clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
>
> return 0;
> @@ -708,8 +1389,6 @@ static int __maybe_unused qmp_usbc_runtime_resume(struct device *dev)
> struct qmp_usbc *qmp = dev_get_drvdata(dev);
> int ret = 0;
>
> - dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qmp->mode);
> -
> if (!qmp->phy->init_count) {
> dev_vdbg(dev, "PHY not initialized, bailing out\n");
> return 0;
> @@ -719,14 +1398,19 @@ static int __maybe_unused qmp_usbc_runtime_resume(struct device *dev)
> if (ret)
> return ret;
>
> - ret = clk_prepare_enable(qmp->pipe_clk);
> - if (ret) {
> - dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
> - clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
> - return ret;
> - }
> + if (qmp->type == QMP_PHY_USBC_USB) {
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
>
> - qmp_usbc_disable_autonomous_mode(qmp);
> + dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", layout->mode);
> + ret = clk_prepare_enable(layout->pipe_clk);
> + if (ret) {
> + dev_err(dev, "pipe_clk enable failed, err=%d\n", ret);
> + clk_bulk_disable_unprepare(qmp->num_clks, qmp->clks);
> + return ret;
> + }
> +
> + qmp_usbc_disable_autonomous_mode(qmp);
> + }
>
> return 0;
> }
> @@ -738,19 +1422,54 @@ static const struct dev_pm_ops qmp_usbc_pm_ops = {
>
> static int qmp_usbc_vreg_init(struct qmp_usbc *qmp)
> {
> - const struct qmp_phy_cfg *cfg = qmp->cfg;
> struct device *dev = qmp->dev;
> - int num = cfg->num_vregs;
> - int i;
> + int ret, i;
>
> - qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> - if (!qmp->vregs)
> - return -ENOMEM;
> + if (qmp->type == QMP_PHY_USBC_USB) {
> + struct qmp_phy_usb_cfg *cfg = to_usb_cfg(qmp);
> + int num = cfg->num_vregs;
>
> - for (i = 0; i < num; i++)
> - qmp->vregs[i].supply = cfg->vreg_list[i];
> + qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> + if (!qmp->vregs)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->vregs[i].supply = cfg->vreg_list[i];
>
> - return devm_regulator_bulk_get(dev, num, qmp->vregs);
> + ret = devm_regulator_bulk_get(dev, num, qmp->vregs);
> + if (ret) {
> + dev_err(dev, "failed at devm_regulator_bulk_get\n");
> + return ret;
> + }
> + } else {
> + struct qmp_phy_dp_cfg *cfg = to_dp_cfg(qmp);
> + int num = cfg->num_vregs;
> +
> + qmp->vregs = devm_kcalloc(dev, num, sizeof(*qmp->vregs), GFP_KERNEL);
> + if (!qmp->vregs)
> + return -ENOMEM;
> +
> + for (i = 0; i < num; i++)
> + qmp->vregs[i].supply = cfg->vreg_list[i].name;
> +
> + ret = devm_regulator_bulk_get(dev, num, qmp->vregs);
> + if (ret) {
> + dev_err(dev, "failed at devm_regulator_bulk_get\n");
> + return ret;
> + }
> +
> + for (i = 0; i < num; i++) {
> + ret = regulator_set_load(qmp->vregs[i].consumer,
> + cfg->vreg_list[i].enable_load);
> + if (ret) {
> + dev_err(dev, "failed to set load at %s\n",
> + qmp->vregs[i].supply);
> + return ret;
> + }
> + }
> + }
> +
> + return 0;
> }
>
> static int qmp_usbc_reset_init(struct qmp_usbc *qmp,
> @@ -821,7 +1540,9 @@ static void phy_clk_release_provider(void *res)
> */
> static int phy_pipe_clk_register(struct qmp_usbc *qmp, struct device_node *np)
> {
> - struct clk_fixed_rate *fixed = &qmp->pipe_clk_fixed;
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
> +
> + struct clk_fixed_rate *fixed = &layout->pipe_clk_fixed;
> struct clk_init_data init = { };
> int ret;
>
> @@ -864,12 +1585,12 @@ static int qmp_usbc_typec_switch_set(struct typec_switch_dev *sw,
> mutex_lock(&qmp->phy_mutex);
> qmp->orientation = orientation;
>
> - if (qmp->usb_init_count) {
> - qmp_usbc_power_off(qmp->phy);
> - qmp_usbc_exit(qmp->phy);
> + if (qmp->init_count) {
> + qmp_usbc_usb_power_off(qmp->phy);
> + qmp_usbc_com_exit(qmp->phy);
>
> - qmp_usbc_init(qmp->phy);
> - qmp_usbc_power_on(qmp->phy);
> + qmp_usbc_com_init(qmp->phy);
> + qmp_usbc_usb_power_on(qmp->phy);
> }
>
> mutex_unlock(&qmp->phy_mutex);
> @@ -880,22 +1601,24 @@ static int qmp_usbc_typec_switch_set(struct typec_switch_dev *sw,
> static void qmp_usbc_typec_unregister(void *data)
> {
> struct qmp_usbc *qmp = data;
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
>
> - typec_switch_unregister(qmp->sw);
> + typec_switch_unregister(layout->sw);
> }
>
> static int qmp_usbc_typec_switch_register(struct qmp_usbc *qmp)
> {
> struct typec_switch_desc sw_desc = {};
> struct device *dev = qmp->dev;
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
>
> sw_desc.drvdata = qmp;
> sw_desc.fwnode = dev->fwnode;
> sw_desc.set = qmp_usbc_typec_switch_set;
> - qmp->sw = typec_switch_register(dev, &sw_desc);
> - if (IS_ERR(qmp->sw)) {
> - dev_err(dev, "Unable to register typec switch: %pe\n", qmp->sw);
> - return PTR_ERR(qmp->sw);
> + layout->sw = typec_switch_register(dev, &sw_desc);
> + if (IS_ERR(layout->sw)) {
> + dev_err(dev, "Unable to register typec switch: %pe\n", layout->sw);
> + return PTR_ERR(layout->sw);
> }
>
> return devm_add_action_or_reset(dev, qmp_usbc_typec_unregister, qmp);
> @@ -907,15 +1630,16 @@ static int qmp_usbc_typec_switch_register(struct qmp_usbc *qmp)
> }
> #endif
>
> -static int qmp_usbc_parse_dt_legacy(struct qmp_usbc *qmp, struct device_node *np)
> +static int qmp_usbc_parse_usb_dt_legacy(struct qmp_usbc *qmp, struct device_node *np)
> {
> struct platform_device *pdev = to_platform_device(qmp->dev);
> struct device *dev = qmp->dev;
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
> int ret;
>
> - qmp->serdes = devm_platform_ioremap_resource(pdev, 0);
> - if (IS_ERR(qmp->serdes))
> - return PTR_ERR(qmp->serdes);
> + layout->serdes = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(layout->serdes))
> + return PTR_ERR(layout->serdes);
>
> /*
> * Get memory resources for the PHY:
> @@ -923,35 +1647,35 @@ static int qmp_usbc_parse_dt_legacy(struct qmp_usbc *qmp, struct device_node *np
> * For dual lane PHYs: tx2 -> 3, rx2 -> 4, pcs_misc (optional) -> 5
> * For single lane PHYs: pcs_misc (optional) -> 3.
> */
> - qmp->tx = devm_of_iomap(dev, np, 0, NULL);
> - if (IS_ERR(qmp->tx))
> - return PTR_ERR(qmp->tx);
> + layout->tx = devm_of_iomap(dev, np, 0, NULL);
> + if (IS_ERR(layout->tx))
> + return PTR_ERR(layout->tx);
>
> - qmp->rx = devm_of_iomap(dev, np, 1, NULL);
> - if (IS_ERR(qmp->rx))
> - return PTR_ERR(qmp->rx);
> + layout->rx = devm_of_iomap(dev, np, 1, NULL);
> + if (IS_ERR(layout->rx))
> + return PTR_ERR(layout->rx);
>
> - qmp->pcs = devm_of_iomap(dev, np, 2, NULL);
> - if (IS_ERR(qmp->pcs))
> - return PTR_ERR(qmp->pcs);
> + layout->pcs = devm_of_iomap(dev, np, 2, NULL);
> + if (IS_ERR(layout->pcs))
> + return PTR_ERR(layout->pcs);
>
> - qmp->tx2 = devm_of_iomap(dev, np, 3, NULL);
> - if (IS_ERR(qmp->tx2))
> - return PTR_ERR(qmp->tx2);
> + layout->tx2 = devm_of_iomap(dev, np, 3, NULL);
> + if (IS_ERR(layout->tx2))
> + return PTR_ERR(layout->tx2);
>
> - qmp->rx2 = devm_of_iomap(dev, np, 4, NULL);
> - if (IS_ERR(qmp->rx2))
> - return PTR_ERR(qmp->rx2);
> + layout->rx2 = devm_of_iomap(dev, np, 4, NULL);
> + if (IS_ERR(layout->rx2))
> + return PTR_ERR(layout->rx2);
>
> - qmp->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
> - if (IS_ERR(qmp->pcs_misc)) {
> + layout->pcs_misc = devm_of_iomap(dev, np, 5, NULL);
> + if (IS_ERR(layout->pcs_misc)) {
> dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
> - qmp->pcs_misc = NULL;
> + layout->pcs_misc = NULL;
> }
>
> - qmp->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
> - if (IS_ERR(qmp->pipe_clk)) {
> - return dev_err_probe(dev, PTR_ERR(qmp->pipe_clk),
> + layout->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
> + if (IS_ERR(layout->pipe_clk)) {
> + return dev_err_probe(dev, PTR_ERR(layout->pipe_clk),
> "failed to get pipe clock\n");
> }
>
> @@ -969,11 +1693,12 @@ static int qmp_usbc_parse_dt_legacy(struct qmp_usbc *qmp, struct device_node *np
> return 0;
> }
>
> -static int qmp_usbc_parse_dt(struct qmp_usbc *qmp)
> +static int qmp_usbc_parse_usb_dt(struct qmp_usbc *qmp)
> {
> struct platform_device *pdev = to_platform_device(qmp->dev);
> - const struct qmp_phy_cfg *cfg = qmp->cfg;
> - const struct qmp_usbc_offsets *offs = cfg->offsets;
> + const struct qmp_phy_usb_cfg *cfg = to_usb_cfg(qmp);
> + const struct qmp_usbc_usb_offsets *offs = cfg->offsets;
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
> struct device *dev = qmp->dev;
> void __iomem *base;
> int ret;
> @@ -985,23 +1710,23 @@ static int qmp_usbc_parse_dt(struct qmp_usbc *qmp)
> if (IS_ERR(base))
> return PTR_ERR(base);
>
> - qmp->serdes = base + offs->serdes;
> - qmp->pcs = base + offs->pcs;
> + layout->serdes = base + offs->serdes;
> + layout->pcs = base + offs->pcs;
> if (offs->pcs_misc)
> - qmp->pcs_misc = base + offs->pcs_misc;
> - qmp->tx = base + offs->tx;
> - qmp->rx = base + offs->rx;
> + layout->pcs_misc = base + offs->pcs_misc;
> + layout->tx = base + offs->tx;
> + layout->rx = base + offs->rx;
>
> - qmp->tx2 = base + offs->tx2;
> - qmp->rx2 = base + offs->rx2;
> + layout->tx2 = base + offs->tx2;
> + layout->rx2 = base + offs->rx2;
>
> ret = qmp_usbc_clk_init(qmp);
> if (ret)
> return ret;
>
> - qmp->pipe_clk = devm_clk_get(dev, "pipe");
> - if (IS_ERR(qmp->pipe_clk)) {
> - return dev_err_probe(dev, PTR_ERR(qmp->pipe_clk),
> + layout->pipe_clk = devm_clk_get(dev, "pipe");
> + if (IS_ERR(layout->pipe_clk)) {
> + return dev_err_probe(dev, PTR_ERR(layout->pipe_clk),
> "failed to get pipe clock\n");
> }
>
> @@ -1013,10 +1738,11 @@ static int qmp_usbc_parse_dt(struct qmp_usbc *qmp)
> return 0;
> }
>
> -static int qmp_usbc_parse_vls_clamp(struct qmp_usbc *qmp)
> +static int qmp_usbc_parse_usb_vls_clamp(struct qmp_usbc *qmp)
> {
> struct of_phandle_args tcsr_args;
> struct device *dev = qmp->dev;
> + struct qmp_phy_usb_layout *layout = to_usb_layout(qmp);
> int ret;
>
> /* for backwards compatibility ignore if there is no property */
> @@ -1027,22 +1753,280 @@ static int qmp_usbc_parse_vls_clamp(struct qmp_usbc *qmp)
> else if (ret < 0)
> return dev_err_probe(dev, ret, "Failed to parse qcom,tcsr-reg\n");
>
> - qmp->tcsr_map = syscon_node_to_regmap(tcsr_args.np);
> + layout->tcsr_map = syscon_node_to_regmap(tcsr_args.np);
> of_node_put(tcsr_args.np);
> - if (IS_ERR(qmp->tcsr_map))
> - return PTR_ERR(qmp->tcsr_map);
> + if (IS_ERR(layout->tcsr_map))
> + return PTR_ERR(layout->tcsr_map);
>
> - qmp->vls_clamp_reg = tcsr_args.args[0];
> + layout->vls_clamp_reg = tcsr_args.args[0];
>
> return 0;
> }
>
> +static int qmp_usbc_parse_dp_phy_mode(struct qmp_usbc *qmp)
> +{
> + struct of_phandle_args tcsr_args;
> + struct device *dev = qmp->dev;
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> + int ret;
> +
> + /* for backwards compatibility ignore if there is no property */
> + ret = of_parse_phandle_with_fixed_args(dev->of_node, "qcom,tcsr-reg", 1, 0,
> + &tcsr_args);
> + if (ret < 0)
> + return dev_err_probe(dev, ret, "Failed to parse qcom,tcsr-reg\n");
> +
> + layout->tcsr_map = syscon_node_to_regmap(tcsr_args.np);
> + of_node_put(tcsr_args.np);
> + if (IS_ERR(layout->tcsr_map))
> + return PTR_ERR(layout->tcsr_map);
> +
> + layout->dp_phy_mode = tcsr_args.args[0];
> +
> + return 0;
> +}
> +
> +static int qmp_usbc_parse_dp_dt(struct qmp_usbc *qmp)
> +{
> + struct platform_device *pdev = to_platform_device(qmp->dev);
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> + struct qmp_phy_dp_cfg *cfg = to_dp_cfg(qmp);
> + const struct qmp_usbc_dp_offsets *offs = cfg->offsets;
> + struct device *dev = qmp->dev;
> + void __iomem *base;
> + int ret;
> +
> + base = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(base)) {
> + dev_err(dev, "get resource fail, ret:%d\n", ret);
> + return PTR_ERR(base);
> + }
> +
> + layout->dp_serdes = base + offs->dp_serdes;
> + layout->dp_tx = base + offs->dp_txa;
> + layout->dp_tx2 = base + offs->dp_txb;
> + layout->dp_phy = base + offs->dp_phy;
> +
> + ret = qmp_usbc_clk_init(qmp);
> + if (ret) {
> + dev_err(dev, "clk init fail, ret:%d\n", ret);
> + return ret;
> + }
> +
> + ret = qmp_usbc_reset_init(qmp, dp_usb3phy_reset_l,
> + ARRAY_SIZE(dp_usb3phy_reset_l));
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +/*
> + * Display Port PLL driver block diagram for branch clocks
> + *
> + * +------------------------------+
> + * | DP_VCO_CLK |
> + * | |
> + * | +-------------------+ |
> + * | | (DP PLL/VCO) | |
> + * | +---------+---------+ |
> + * | v |
> + * | +----------+-----------+ |
> + * | | hsclk_divsel_clk_src | |
> + * | +----------+-----------+ |
> + * +------------------------------+
> + * |
> + * +---------<---------v------------>----------+
> + * | |
> + * +--------v----------------+ |
> + * | dp_phy_pll_link_clk | |
> + * | link_clk | |
> + * +--------+----------------+ |
> + * | |
> + * | |
> + * v v
> + * Input to DISPCC block |
> + * for link clk, crypto clk |
> + * and interface clock |
> + * |
> + * |
> + * +--------<------------+-----------------+---<---+
> + * | | |
> + * +----v---------+ +--------v-----+ +--------v------+
> + * | vco_divided | | vco_divided | | vco_divided |
> + * | _clk_src | | _clk_src | | _clk_src |
> + * | | | | | |
> + * |divsel_six | | divsel_two | | divsel_four |
> + * +-------+------+ +-----+--------+ +--------+------+
> + * | | |
> + * v---->----------v-------------<------v
> + * |
> + * +----------+-----------------+
> + * | dp_phy_pll_vco_div_clk |
> + * +---------+------------------+
> + * |
> + * v
> + * Input to DISPCC block
> + * for DP pixel clock
> + *
> + */
> +static int qmp_dp_pixel_clk_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 1620000000UL / 2:
> + case 2700000000UL / 2:
> + /* 5.4 and 8.1 GHz are same link rate as 2.7GHz, i.e. div 4 and div 6 */
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long qmp_dp_pixel_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + // const struct qmp_usbc *qmp;
> + struct qmp_phy_dp_layout *layout;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + layout = container_of(hw, struct qmp_phy_dp_layout, dp_pixel_hw);
> +
> + dp_opts = &layout->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + return 1620000000UL / 2;
> + case 2700:
> + return 2700000000UL / 2;
> + case 5400:
> + return 5400000000UL / 4;
> + case 8100:
> + return 8100000000UL / 6;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qmp_dp_pixel_clk_ops = {
> + .determine_rate = qmp_dp_pixel_clk_determine_rate,
> + .recalc_rate = qmp_dp_pixel_clk_recalc_rate,
> +};
> +
> +static int qmp_dp_link_clk_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
> +{
> + switch (req->rate) {
> + case 162000000:
> + case 270000000:
> + case 540000000:
> + case 810000000:
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static unsigned long qmp_dp_link_clk_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + // const struct qmp_combo *qmp;
> + struct qmp_phy_dp_layout *layout;
> + const struct phy_configure_opts_dp *dp_opts;
> +
> + layout = container_of(hw, struct qmp_phy_dp_layout, dp_link_hw);
> + dp_opts = &layout->dp_opts;
> +
> + switch (dp_opts->link_rate) {
> + case 1620:
> + case 2700:
> + case 5400:
> + case 8100:
> + return dp_opts->link_rate * 100000;
> + default:
> + return 0;
> + }
> +}
> +
> +static const struct clk_ops qmp_dp_link_clk_ops = {
> + .determine_rate = qmp_dp_link_clk_determine_rate,
> + .recalc_rate = qmp_dp_link_clk_recalc_rate,
> +};
> +
> +static int phy_dp_clks_register(struct qmp_usbc *qmp, struct device_node *np)
> +{
> + struct clk_init_data init = { };
> + int ret = 0;
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> +
> + ret = of_property_read_string_index(np, "clock-output-names", 0, &init.name);
> + if (ret < 0) {
> + dev_err(qmp->dev, "%pOFn: No link clock-output-names\n", np);
> + return ret;
> + }
> +
> + init.ops = &qmp_dp_link_clk_ops;
> + layout->dp_link_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &layout->dp_link_hw);
> + if (ret < 0) {
> + dev_err(qmp->dev, "link clk reg fail ret=%d\n", ret);
> + return ret;
> + }
> +
> + ret = of_property_read_string_index(np, "clock-output-names", 1, &init.name);
> + if (ret) {
> + dev_err(qmp->dev, "%pOFn: No div clock-output-names\n", np);
> + return ret;
> + }
> +
> + init.ops = &qmp_dp_pixel_clk_ops;
> + layout->dp_pixel_hw.init = &init;
> + ret = devm_clk_hw_register(qmp->dev, &layout->dp_pixel_hw);
> + if (ret) {
> + dev_err(qmp->dev, "pxl clk reg fail ret=%d\n", ret);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static struct clk_hw *qmp_dp_clks_hw_get(struct of_phandle_args *clkspec, void *data)
> +{
> + struct qmp_usbc *qmp = data;
> + struct qmp_phy_dp_layout *layout = to_dp_layout(qmp);
> +
> + switch (clkspec->args[0]) {
> + case QMP_USB43DP_DP_LINK_CLK:
> + return &layout->dp_link_hw;
> + case QMP_USB43DP_DP_VCO_DIV_CLK:
> + return &layout->dp_pixel_hw;
> + }
> +
> + return ERR_PTR(-EINVAL);
> +}
> +
> +static int qmp_dp_register_clocks(struct qmp_usbc *qmp, struct device_node *dp_np)
> +{
> + int ret;
> +
> + ret = phy_dp_clks_register(qmp, dp_np);
> + if (ret) {
> + dev_err(qmp->dev, "dp clk reg fail ret:%d\n", ret);
> + return ret;
> + }
> +
> + ret = of_clk_add_hw_provider(dp_np, qmp_dp_clks_hw_get, qmp);
> + if (ret) {
> + dev_err(qmp->dev, "add provider fail ret:%d\n", ret);
> + return ret;
> + }
> +
> + return devm_add_action_or_reset(qmp->dev, phy_clk_release_provider, dp_np);
> +}
> +
> static int qmp_usbc_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> struct phy_provider *phy_provider;
> struct device_node *np;
> struct qmp_usbc *qmp;
> + const struct dev_cfg *data_cfg;
> int ret;
>
> qmp = devm_kzalloc(dev, sizeof(*qmp), GFP_KERNEL);
> @@ -1050,38 +2034,74 @@ static int qmp_usbc_probe(struct platform_device *pdev)
> return -ENOMEM;
>
> qmp->dev = dev;
> - dev_set_drvdata(dev, qmp);
>
> qmp->orientation = TYPEC_ORIENTATION_NORMAL;
>
> - qmp->cfg = of_device_get_match_data(dev);
> - if (!qmp->cfg)
> + qmp->init_count = 0;
> +
> + data_cfg = of_device_get_match_data(dev);
> + if (!data_cfg) {
> + dev_err(qmp->dev, "get data fail\n");
> return -EINVAL;
> + }
>
> mutex_init(&qmp->phy_mutex);
>
> - ret = qmp_usbc_vreg_init(qmp);
> - if (ret)
> - return ret;
> + qmp->type = data_cfg->type;
> + qmp->cfg = data_cfg->cfg;
>
> - ret = qmp_usbc_typec_switch_register(qmp);
> - if (ret)
> + ret = qmp_usbc_vreg_init(qmp);
> + if (ret) {
> + dev_err(qmp->dev, "qmp_type(%d) vreg init fail\n", qmp->type);
> return ret;
> + }
>
> - ret = qmp_usbc_parse_vls_clamp(qmp);
> - if (ret)
> - return ret;
> + if (qmp->type == QMP_PHY_USBC_USB) {
> + qmp->layout = devm_kzalloc(dev, sizeof(struct qmp_phy_usb_layout), GFP_KERNEL);
> + if (!qmp->layout)
> + return -ENOMEM;
> +
> + ret = qmp_usbc_typec_switch_register(qmp);
> + if (ret)
> + return ret;
> +
> + ret = qmp_usbc_parse_usb_vls_clamp(qmp);
> + if (ret)
> + return ret;
> +
> + /* Check for legacy binding with child node. */
> + np = of_get_child_by_name(dev->of_node, "phy");
> + if (np) {
> + ret = qmp_usbc_parse_usb_dt_legacy(qmp, np);
> + } else {
> + np = of_node_get(dev->of_node);
> + ret = qmp_usbc_parse_usb_dt(qmp);
> + }
> + if (ret)
> + goto err_node_put;
> + } else if (qmp->type == QMP_PHY_USBC_DP) {
> + qmp->layout = devm_kzalloc(dev, sizeof(struct qmp_phy_dp_layout), GFP_KERNEL);
> + if (!qmp->layout)
> + return -ENOMEM;
>
> - /* Check for legacy binding with child node. */
> - np = of_get_child_by_name(dev->of_node, "phy");
> - if (np) {
> - ret = qmp_usbc_parse_dt_legacy(qmp, np);
> - } else {
> np = of_node_get(dev->of_node);
> - ret = qmp_usbc_parse_dt(qmp);
> - }
> - if (ret)
> + ret = qmp_usbc_parse_dp_phy_mode(qmp);
> + if (ret)
> + goto err_node_put;
> +
> + ret = qmp_usbc_parse_dp_dt(qmp);
> + if (ret)
> + goto err_node_put;
> +
> + ret = drm_aux_bridge_register(dev);
> + if (ret) {
> + dev_err(qmp->dev, "aux bridge reg fail ret=%d\n", ret);
> + goto err_node_put;
> + }
> + } else {
> + dev_err(dev, "invalid phy type: %d\n", qmp->type);
> goto err_node_put;
> + }
>
> pm_runtime_set_active(dev);
> ret = devm_pm_runtime_enable(dev);
> @@ -1093,19 +2113,33 @@ static int qmp_usbc_probe(struct platform_device *pdev)
> */
> pm_runtime_forbid(dev);
>
> - ret = phy_pipe_clk_register(qmp, np);
> - if (ret)
> - goto err_node_put;
> -
> - qmp->phy = devm_phy_create(dev, np, &qmp_usbc_phy_ops);
> - if (IS_ERR(qmp->phy)) {
> - ret = PTR_ERR(qmp->phy);
> - dev_err(dev, "failed to create PHY: %d\n", ret);
> - goto err_node_put;
> + if (qmp->type == QMP_PHY_USBC_USB) {
> + // pipe clk process
> + ret = phy_pipe_clk_register(qmp, np);
> + if (ret)
> + goto err_node_put;
> +
> + qmp->phy = devm_phy_create(dev, np, &qmp_usbc_usb_phy_ops);
> + if (IS_ERR(qmp->phy)) {
> + ret = PTR_ERR(qmp->phy);
> + dev_err(dev, "failed to create PHY: %d\n", ret);
> + goto err_node_put;
> + }
> + } else {
> + ret = qmp_dp_register_clocks(qmp, np);
> + if (ret)
> + goto err_node_put;
> +
> + qmp->phy = devm_phy_create(dev, np, &qmp_usbc_dp_phy_ops);
> + if (IS_ERR(qmp->phy)) {
> + ret = PTR_ERR(qmp->phy);
> + dev_err(dev, "failed to create PHY: %d\n", ret);
> + goto err_node_put;
> + }
> }
>
> phy_set_drvdata(qmp->phy, qmp);
> -
> + dev_set_drvdata(dev, qmp);
> of_node_put(np);
>
> phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> @@ -1120,19 +2154,38 @@ static int qmp_usbc_probe(struct platform_device *pdev)
> static const struct of_device_id qmp_usbc_of_match_table[] = {
> {
> .compatible = "qcom,msm8998-qmp-usb3-phy",
> - .data = &msm8998_usb3phy_cfg,
> + .data = &(struct dev_cfg) {
> + .type = QMP_PHY_USBC_USB,
> + .cfg = &msm8998_usb3phy_cfg,
> + },
> }, {
> .compatible = "qcom,qcm2290-qmp-usb3-phy",
> - .data = &qcm2290_usb3phy_cfg,
> + .data = &(struct dev_cfg) {
> + .type = QMP_PHY_USBC_USB,
> + .cfg = &qcm2290_usb3phy_cfg,
> + },
> + }, {
> + .compatible = "qcom,qcs615-qmp-dp-phy",
> + .data = &(struct dev_cfg) {
> + .type = QMP_PHY_USBC_DP,
> + .cfg = &qcs615_dpphy_cfg,
> + },
> }, {
> .compatible = "qcom,sdm660-qmp-usb3-phy",
> - .data = &sdm660_usb3phy_cfg,
> + .data = &(struct dev_cfg) {
> + .type = QMP_PHY_USBC_USB,
> + .cfg = &sdm660_usb3phy_cfg,
> + },
> }, {
> .compatible = "qcom,sm6115-qmp-usb3-phy",
> - .data = &qcm2290_usb3phy_cfg,
> + .data = &(struct dev_cfg) {
> + .type = QMP_PHY_USBC_USB,
> + .cfg = &qcm2290_usb3phy_cfg,
> + },
> },
> { },
> };
> +
> MODULE_DEVICE_TABLE(of, qmp_usbc_of_match_table);
>
> static struct platform_driver qmp_usbc_driver = {
>
> --
> 2.25.1
>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list