[PATCH v5 07/10] drm/display: bridge_connector: use drm_bridge_connector_mode_valid()

[Dmitry Baryshkov]

Use new drm_bridge_connector_mode_valid() helper if there is a HDMI
bridge in the bridge chain. This removes the need to perform TMDS char
rate check manually in the bridge driver.

Reviewed-by: Chen-Yu Tsai <wens at csie.org>
Reviewed-by: Maxime Ripard <mripard at kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
---
 drivers/gpu/drm/display/drm_bridge_connector.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/display/drm_bridge_connector.c b/drivers/gpu/drm/display/drm_bridge_connector.c
index 320c297008aaa8b6ef5b1f4c71928849b202e8ac..512ced87ea18c74e182a558a686ddd83de891814 100644
--- a/drivers/gpu/drm/display/drm_bridge_connector.c
+++ b/drivers/gpu/drm/display/drm_bridge_connector.c
@@ -18,6 +18,7 @@
 #include <drm/drm_managed.h>
 #include <drm/drm_modeset_helper_vtables.h>
 #include <drm/drm_probe_helper.h>
+#include <drm/display/drm_hdmi_helper.h>
 #include <drm/display/drm_hdmi_state_helper.h>
 
 /**
@@ -299,9 +300,22 @@ static int drm_bridge_connector_get_modes(struct drm_connector *connector)
 	return 0;
 }
 
+static enum drm_mode_status
+drm_bridge_connector_mode_valid(struct drm_connector *connector,
+				struct drm_display_mode *mode)
+{
+	struct drm_bridge_connector *bridge_connector =
+		to_drm_bridge_connector(connector);
+
+	if (bridge_connector->bridge_hdmi)
+		return drm_hdmi_connector_mode_valid(connector, mode);
+
+	return MODE_OK;
+}
+
 static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = {
 	.get_modes = drm_bridge_connector_get_modes,
-	/* No need for .mode_valid(), the bridges are checked by the core. */
+	.mode_valid = drm_bridge_connector_mode_valid,
 	.enable_hpd = drm_bridge_connector_enable_hpd,
 	.disable_hpd = drm_bridge_connector_disable_hpd,
 };

-- 
2.39.5