[PATCH drm-dp 1/4] drm/hisilicon/hibmc: add dp aux in hibmc drivers

[Andy Yan]

Hi Baihan，

At 2024-10-01 15:26:23, "shiyongbang" <shiyongbang at huawei.com> wrote:
>From: baihan li <libaihan at huawei.com>
>
>Add dp aux read/write functions. They are basic functions
> and will be used later.
>
>Signed-off-by: baihan li <libaihan at huawei.com>
>---
> drivers/gpu/drm/hisilicon/hibmc/Makefile     |   3 +-
> drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.c  | 227 +++++++++++++++++++
> drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.h  |  80 +++++++
> drivers/gpu/drm/hisilicon/hibmc/dp/dp_comm.h |  88 +++++++
> drivers/gpu/drm/hisilicon/hibmc/dp/dp_reg.h  |  76 +++++++
> 5 files changed, 473 insertions(+), 1 deletion(-)
> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.c
> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_aux.h
> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_comm.h
> create mode 100644 drivers/gpu/drm/hisilicon/hibmc/dp/dp_reg.h
>
>diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile
>index d25c75e60d3d..8770ec6dfffd 100644
>--- a/drivers/gpu/drm/hisilicon/hibmc/Makefile
>+++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile
>@@ -1,4 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0-only
>-hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_drm_i2c.o
>+hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_drm_i2c.o \
>+	       dp/dp_aux.o

>+
>+#define DPCD_LINK_BW_SET		0x0100
>+#define DPCD_LANE_COUNT_SET		0x0101
>+#define DPCD_TRAINING_PATTERN_SET	0x0102
>+#define DPCD_TRAINING_LANE0_SET		0x0103
>+#define DPCD_DOWNSPREAD_CTRL		0x0107
>+#define DPCD_LANE0_1_STATUS		0x0202
>+#define DPCD_ADJUST_REQUEST_LANE0_1	0x0206

It seems that all of these have been defined in this header file.
 include/drm/display/drm_dp.h：
DP_LINK_BW_SET
DP_LANE_COUNT_SET




>+
>+#define DPCD_VOLTAGE_SWING_LANE_0	(BIT(0) | BIT(1))
>+#define DPCD_PRE_EMPHASIS_LANE_0	(BIT(2) | BIT(3))
>+#define DPCD_VOLTAGE_SWING_SET_S	0
>+#define DPCD_PRE_EMPHASIS_SET_S		3
>+#define DPCD_SCRAMBLING_DISABLE		BIT(5)
>+#define DPCD_CR_DONE_BITS		BIT(0)
>+#define DPCD_EQ_DONE_BITS		(BIT(0) | BIT(1) | BIT(2))
>+#define DPCD_ENHANCED_FRAME_EN		0x80
>+
>+#define DPCD_TRAINING_PATTERN_DISABLE	0x0
>+#define DPCD_TRAINING_PATTERN_1		0x1
>+#define DPCD_TRAINING_PATTERN_2		0x2
>+#define DPCD_TRAINING_PATTERN_3		0x3
>+#define DPCD_TRAINING_PATTERN_4		0x7
>+#define DPCD_VOLTAGE_SWING_LEVEL_0	FIELD_PREP(GENMASK(1, 0), 0)
>+#define DPCD_VOLTAGE_SWING_LEVEL_1	FIELD_PREP(GENMASK(1, 0), 1)
>+#define DPCD_VOLTAGE_SWING_LEVEL_2	FIELD_PREP(GENMASK(1, 0), 2)
>+#define DPCD_VOLTAGE_SWING_LEVEL_3	FIELD_PREP(GENMASK(1, 0), 3)
>+#define DPCD_PRE_EMPHASIS_LEVEL_0	FIELD_PREP(GENMASK(4, 3), 0)
>+#define DPCD_PRE_EMPHASIS_LEVEL_1	FIELD_PREP(GENMASK(4, 3), 1)
>+#define DPCD_PRE_EMPHASIS_LEVEL_2	FIELD_PREP(GENMASK(4, 3), 2)
>+#define DPCD_PRE_EMPHASIS_LEVEL_3	FIELD_PREP(GENMASK(4, 3), 3)
>+
>+#define DP_LINK_RATE_NUM		4
>+#define DP_LINK_RATE_0			0x6
>+#define DP_LINK_RATE_1			0xA
>+#define DP_LINK_RATE_2			0x14
>+#define DP_LINK_RATE_3			0x1E
>+#define DP_AUX_NATIVE_REPLY_MASK	(0x3 << 4)
>+#define DP_AUX_ACK			(0 << 4)
>+#define DP_AUX_NACK			(0x1 << 4)
>+#define DP_AUX_DEFER			(0x2 << 4)
>+#define DP_CFG_AUX_S			17
>+#define DP_CFG_AUX_STATUS_S		4
>+
>+#define AUX_4_BYTE			4
>+#define AUX_4_BIT			4
>+#define AUX_8_BIT			8
>+#define AUX_RESET_INTERVAL		15
>+#define AUX_RETRY_INTERVAL		500
>+#define AUX_READY_DATA_BYTE_S		12
>+
>+/* aux_cmd_addr register shift */
>+#define AUX_CMD_REQ_TYPE_S		0
>+#define AUX_CMD_REQ_LEN_S		4
>+#define AUX_CMD_ADDR_S			8
>+#define AUX_CMD_I2C_ADDR_ONLY_S		28
>