[PATCH v2 00/14] drm/msm/dpu: Support quad pipe with dual-DSI

Jun Nie jun.nie at linaro.org
Wed Oct 9 08:50:13 UTC 2024


---
2 or more SSPPs and dual-DSI interface are need for super wide DSI panel.
And 4 DSC are prefered for power optimal in this case. This patch set
extend number of pipes to 4 and revise related mixer blending logic
to support quad pipe.  All these changes depends on the virtual plane
feature to split a super wide drm plane horizontally into 2 or more sub
clip. Thus DMA of multiple SSPPs can share the effort of fetching the
whole drm plane.

The first pipe pair co-work with the first mixer pair to cover the left
half of screen and 2nd pair of pipes and mixers are for the right half
of screen. If a plane is only for the right half of screen, only one
or two of pipes in the 2nd pipe pair are valid, and no SSPP or mixer is
assinged for invalid pipe.

For those panel that does not require quad-pipe, only 1 or 2 pipes in
the 1st pipe pair will be used. There is no concept of right half of
screen.

For legacy non virtual plane mode, the first 1 or 2 pipes are used for
the single SSPP and its multi-rect mode.

This patch set depends on virtual plane patch set v5 and flexible
number of DSC patch set:
https://patchwork.freedesktop.org/series/135456/

Changes in v2:
- Revise the patch sequence with changing to 2 pipes topology first. Then
  prepare for quad-pipe setup, then enable quad-pipe at last.
- Link to v1: https://lore.kernel.org/all/20240829-sm8650-v6-11-hmd-pocf-mdss-quad-upstream-8-v1-0-bdb05b4b5a2e@linaro.org/

Signed-off-by: Jun Nie <jun.nie at linaro.org>

---
Jun Nie (14):
      drm/msm/dpu: polish log for resource allocation
      drm/msm/dpu: decide right side per last bit
      drm/msm/dpu: fix mixer number counter on allocation
      drm/msm/dpu: switch RM to use crtc_id rather than enc_id for allocation
      drm/msm/dpu: handle pipes as array
      drm/msm/dpu: split PIPES_PER_STAGE definition per plane and mixer
      drm/msm/dpu: bind correct pingpong for quad pipe
      drm/msm/dpu: update mixer number info earlier
      drm/msm/dpu: blend pipes per mixer pairs config
      drm/msm/dpu: Support quad-pipe in SSPP checking
      drm/msm/dpu: Share SSPP info for multi-rect case
      drm/msm/dpu: support plane splitting in quad-pipe case
      drm/msm/dpu: support SSPP assignment for quad-pipe case
      drm/msm/dpu: Enable quad-pipe for DSC and dual-DSI case

 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c         |  74 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.h         |  12 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c      |  69 ++--
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h |   3 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h   |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c       |   2 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h       |   4 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h      |   4 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_sspp.h      |   2 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h          |  12 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c        | 408 +++++++++++++----------
 drivers/gpu/drm/msm/disp/dpu1/dpu_plane.h        |  12 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c           | 210 ++++++------
 drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h           |  19 +-
 drivers/gpu/drm/msm/disp/dpu1/dpu_trace.h        |  10 +-
 15 files changed, 478 insertions(+), 364 deletions(-)
---
base-commit: eac5b436019c2eeb005f7bdf3ca29d5e8f443d67
change-id: 20241009-sm8650-v6-11-hmd-pocf-mdss-quad-upstream-21-1142507692ba

Best regards,
-- 
Jun Nie <jun.nie at linaro.org>



More information about the dri-devel mailing list