[PATCH v2 5/9] dt-bindings: display: bridge: Add ITE IT6263 LVDS to HDMI converter
Dmitry Baryshkov
dmitry.baryshkov at linaro.org
Sat Oct 12 08:30:01 UTC 2024
On Sat, Oct 12, 2024 at 03:35:39PM +0800, Liu Ying wrote:
> Document ITE IT6263 LVDS to HDMI converter.
>
> Product link:
> https://www.ite.com.tw/en/product/cate1/IT6263
>
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
> v2:
> * Document number of LVDS link data lanes. (Biju)
> * Simplify ports property by dropping "oneOf". (Rob)
>
> .../bindings/display/bridge/ite,it6263.yaml | 276 ++++++++++++++++++
> 1 file changed, 276 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
> new file mode 100644
> index 000000000000..bc2bbec07623
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml
> @@ -0,0 +1,276 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ITE IT6263 LVDS to HDMI converter
> +
> +maintainers:
> + - Liu Ying <victor.liu at nxp.com>
> +
> +description: |
> + The IT6263 is a high-performance single-chip De-SSC(De-Spread Spectrum) LVDS
> + to HDMI converter. Combined with LVDS receiver and HDMI 1.4a transmitter,
> + the IT6263 supports LVDS input and HDMI 1.4 output by conversion function.
> + The built-in LVDS receiver can support single-link and dual-link LVDS inputs,
> + and the built-in HDMI transmitter is fully compliant with HDMI 1.4a/3D, HDCP
> + 1.2 and backward compatible with DVI 1.0 specification.
> +
> + The IT6263 also encodes and transmits up to 8 channels of I2S digital audio,
> + with sampling rate up to 192KHz and sample size up to 24 bits. In addition,
> + an S/PDIF input port takes in compressed audio of up to 192KHz frame rate.
> +
> + The newly supported High-Bit Rate(HBR) audio by HDMI specifications v1.3 is
> + provided by the IT6263 in two interfaces: the four I2S input ports or the
> + S/PDIF input port. With both interfaces the highest possible HBR frame rate
> + is supported at up to 768KHz.
> +
> +properties:
No LVDS data-mapping support?
> + compatible:
> + const: ite,it6263
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> + description: audio master clock
> +
> + clock-names:
> + const: mclk
> +
> + reset-gpios:
> + maxItems: 1
> +
> + ivdd-supply:
> + description: 1.8V digital logic power
> +
> + ovdd-supply:
> + description: 3.3V I/O pin power
> +
> + txavcc18-supply:
> + description: 1.8V HDMI analog frontend power
> +
> + txavcc33-supply:
> + description: 3.3V HDMI analog frontend power
> +
> + pvcc1-supply:
> + description: 1.8V HDMI frontend core PLL power
> +
> + pvcc2-supply:
> + description: 1.8V HDMI frontend filter PLL power
> +
> + avcc-supply:
> + description: 3.3V LVDS frontend power
> +
> + anvdd-supply:
> + description: 1.8V LVDS frontend analog power
> +
> + apvdd-supply:
> + description: 1.8V LVDS frontend PLL power
> +
> + "#sound-dai-cells":
> + const: 0
> +
> + ite,lvds-link-num-data-lanes:
> + $ref: /schemas/types.yaml#/definitions/uint8
> + enum: [3, 4, 5]
> + description: number of data lanes per LVDS link
Please use data-lanes property inside the OF graph.
> +
> + ite,i2s-audio-fifo-sources:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 4
> + items:
> + enum: [0, 1, 2, 3]
> + description:
> + Each array element indicates the pin number of an I2S serial data input
> + line which is connected to an audio FIFO, from audio FIFO0 to FIFO3.
What does that mean from the board point of view? Routed audio links for
the multichannel audio?
> +
> + ite,rl-channel-swap-audio-sources:
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + minItems: 1
> + maxItems: 4
> + uniqueItems: true
> + items:
> + enum: [0, 1, 2, 3]
> + description:
> + Each array element indicates an audio source whose right channel and left
> + channel are swapped by this converter. For I2S, the element is the pin
> + number of an I2S serial data input line. For S/PDIF, the element is always
> + 0.
Why?
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port at 0:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description:
> + The first LVDS input link.
> + In dual-link LVDS mode, this link works together with the second LVDS
> + input link, and one link receives odd pixels while the other receives
> + even pixels. Specify the pixels with one of the dual-lvds-odd-pixels
> + and dual-lvds-even-pixels properties when and only when dual-link LVDS
> + mode is used.
> +
> + properties:
> + dual-lvds-odd-pixels:
> + type: boolean
> + description: the first sink port for odd pixels
> +
> + dual-lvds-even-pixels:
> + type: boolean
> + description: the first sink port for even pixels
> +
> + port at 1:
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> + description: the second LVDS input link
> +
> + properties:
> + dual-lvds-even-pixels:
> + type: boolean
> + description: the second sink port for even pixels
> +
> + dual-lvds-odd-pixels:
> + type: boolean
> + description: the second sink port for odd pixels
> +
> + oneOf:
> + - required: [dual-lvds-even-pixels]
> + - required: [dual-lvds-odd-pixels]
This still allows one to specify that both ports provide odd pixels. Is
that expected? Also why do you need two properties which specify the
same option.
My suggestion would be to add a single root-level property which
specifies which port provides even pixel data.
> +
> + port at 2:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: video port for the HDMI output
> +
> + port at 3:
> + $ref: /schemas/graph.yaml#/properties/port
> + description: sound input port
> +
> + required:
> + - port at 0
> + - port at 2
> +
> +required:
> + - compatible
> + - reg
> + - ivdd-supply
> + - ovdd-supply
> + - txavcc18-supply
> + - txavcc33-supply
> + - pvcc1-supply
> + - pvcc2-supply
> + - avcc-supply
> + - anvdd-supply
> + - apvdd-supply
> + - ite,lvds-link-num-data-lanes
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + /* single-link LVDS input */
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hdmi at 4c {
> + compatible = "ite,it6263";
> + reg = <0x4c>;
> + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> + ivdd-supply = <®_buck5>;
> + ovdd-supply = <®_vext_3v3>;
> + txavcc18-supply = <®_buck5>;
> + txavcc33-supply = <®_vext_3v3>;
> + pvcc1-supply = <®_buck5>;
> + pvcc2-supply = <®_buck5>;
> + avcc-supply = <®_vext_3v3>;
> + anvdd-supply = <®_buck5>;
> + apvdd-supply = <®_buck5>;
> + ite,lvds-link-num-data-lanes = /bits/ 8 <4>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> +
> + it6263_lvds_link1: endpoint {
> + remote-endpoint = <&ldb_lvds_ch0>;
> + };
> + };
> +
> + port at 2 {
> + reg = <2>;
> +
> + it6263_out: endpoint {
> + remote-endpoint = <&hdmi_in>;
> + };
> + };
> + };
> + };
> + };
> +
> + - |
> + /* dual-link LVDS input */
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + hdmi at 4c {
> + compatible = "ite,it6263";
> + reg = <0x4c>;
> + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> + ivdd-supply = <®_buck5>;
> + ovdd-supply = <®_vext_3v3>;
> + txavcc18-supply = <®_buck5>;
> + txavcc33-supply = <®_vext_3v3>;
> + pvcc1-supply = <®_buck5>;
> + pvcc2-supply = <®_buck5>;
> + avcc-supply = <®_vext_3v3>;
> + anvdd-supply = <®_buck5>;
> + apvdd-supply = <®_buck5>;
> + ite,lvds-link-num-data-lanes = /bits/ 8 <4>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + dual-lvds-odd-pixels;
> +
> + it6263_lvds_link1_dual: endpoint {
> + remote-endpoint = <&ldb_lvds_ch0>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + dual-lvds-even-pixels;
> +
> + it6263_lvds_link2_dual: endpoint {
> + remote-endpoint = <&ldb_lvds_ch1>;
> + };
> + };
> +
> + port at 2 {
> + reg = <2>;
> +
> + it6263_out_dual: endpoint {
> + remote-endpoint = <&hdmi_in>;
> + };
> + };
> + };
> + };
> + };
> --
> 2.34.1
>
--
With best wishes
Dmitry
More information about the dri-devel
mailing list