[PATCH v2 2/9] arm64: dts: imx8mp-phyboard-pollux-rdk: Add panel-timing node to panel-lvds node

[Marek Vasut]

On 10/12/24 9:35 AM, Liu Ying wrote:
> Add a panel-timing node to panel-lvds node to override any fixed
> display modes written in a panel driver.  This way, 74.25MHz clock
> frequency specified in panel-timing node may accommodate 7-fold
> 519.75MHz "media_ldb" clock which is derived from 1.0395GHz
> "video_pll1" clock.
> 
> This should suppress this LDB driver warning:
> [   17.923709] fsl-ldb 32ec0000.blk-ctrl:bridge at 5c: Configured LDB clock (72400000 Hz) does not match requested LVDS clock: 506800000 Hz
> 
> This also makes the display mode used by the panel pass mode validation
> against pixel clock rate and "media_ldb" clock rate in a certain display
> driver.
> 
> Fixes: 326d86e197fc ("arm64: dts: imx8mp-phyboard-pollux-rdk: add etml panel support")
> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> ---
> v2:
> * No change.
> 
>   .../dts/freescale/imx8mp-phyboard-pollux-rdk.dts  | 15 +++++++++++++++
>   1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> index 50debe821c42..20cb5363cccb 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts
> @@ -37,6 +37,21 @@ panel1_lvds: panel-lvds {
>   		backlight = <&backlight_lvds>;
>   		power-supply = <&reg_vcc_3v3_sw>;
>   
> +		panel-timing {
> +			clock-frequency = <74250000>;
> +			hactive = <1280>;
> +			vactive = <800>;
> +			hfront-porch = <72>;
> +			hback-porch = <86>;
> +			hsync-len = <2>;
> +			vfront-porch = <15>;
> +			vback-porch = <21>;
> +			vsync-len = <2>;
> +			hsync-active = <0>;
> +			vsync-active = <0>;
> +			de-active = <1>;
> +		};
There is an existing entry for this panel in panel-simple.c , please do 
not duplicate timings in the DT:

drivers/gpu/drm/panel/panel-simple.c:static const struct panel_desc 
edt_etml1010g3dra = {
drivers/gpu/drm/panel/panel-simple.c:   .timings = 
&edt_etml1010g3dra_timing,
drivers/gpu/drm/panel/panel-simple.c:           .compatible = 
"edt,etml1010g3dra",