[PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter

[Biju Das]

Hi Liu Ying,

> -----Original Message-----
> From: Liu Ying <victor.liu at nxp.com>
> Sent: Monday, October 14, 2024 8:18 AM
> Subject: Re: [PATCH v2 6/9] drm/bridge: Add ITE IT6263 LVDS to HDMI converter
> 
> On 10/14/2024, Dmitry Baryshkov wrote:
> > On Sat, Oct 12, 2024 at 03:35:40PM +0800, Liu Ying wrote:
> >> Add basic HDMI video output support. Currently, only RGB888 output
> >> pixel format is supported.  At the LVDS input side, the driver
> >> supports single LVDS link and dual LVDS links with "jeida-24" LVDS
> >> mapping.
> >>
> >> Product link:
> >> https://www.ite.com.tw/en/product/cate1/IT6263
> >>
> >> Signed-off-by: Liu Ying <victor.liu at nxp.com>
> >> ---
> >> v2:
> >> * Add AVI inforframe support.  (Maxime)
> >> * Add DRM_MODE_CONNECTOR_HDMIA.  (Biju)
> >> * Rename it6263_reset() to it6263_hw_reset().  (Biju)
> >> * Check number of LVDS link data lanes.  (Biju)
> >>
> >>  drivers/gpu/drm/bridge/Kconfig      |   8 +
> >>  drivers/gpu/drm/bridge/Makefile     |   1 +
> >>  drivers/gpu/drm/bridge/ite-it6263.c | 919
> >> ++++++++++++++++++++++++++++
> >>  3 files changed, 928 insertions(+)
> >>  create mode 100644 drivers/gpu/drm/bridge/ite-it6263.c
> >>
> >
> > [...]
> >
> >> +static int it6263_parse_dt(struct it6263 *it) {
> >> +	struct device *dev = it->dev;
> >> +	struct device_node *port0, *port1;
> >> +	int ret;
> >> +
> >> +	ret = of_property_read_u8(dev->of_node, "ite,lvds-link-num-data-lanes",
> >> +				  &it->lvds_link_num_dlanes);
> >> +	if (ret) {
> >> +		dev_err(dev, "failed to get LVDS link number of data lanes: %d\n",
> >> +			ret);
> >> +		return ret;
> >> +	}
> >> +
> >> +	it->next_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 2, 0);
> >> +	if (IS_ERR(it->next_bridge))
> >> +		return dev_err_probe(dev, PTR_ERR(it->next_bridge),
> >> +				     "failed to get next bridge\n");
> >> +
> >> +	port0 = of_graph_get_port_by_id(dev->of_node, 0);
> >> +	port1 = of_graph_get_port_by_id(dev->of_node, 1);
> >> +	if (port0 && port1) {
> >> +		if (of_property_read_bool(port0, "dual-lvds-even-pixels") &&
> >> +		    of_property_read_bool(port1, "dual-lvds-odd-pixels")) {
> >> +			it->lvds_dual_link = true;
> >> +			it->lvds_link12_swap = true;
> >> +		} else if (of_property_read_bool(port0, "dual-lvds-odd-pixels") &&
> >> +			   of_property_read_bool(port1, "dual-lvds-even-pixels")) {
> >> +			it->lvds_dual_link = true;
> >> +		}
> >> +
> >> +		if (!it->lvds_dual_link) {
> >> +			dev_err(dev,
> >> +				"failed to get LVDS dual link pixel order\n");
> >> +			ret = -EINVAL;
> >> +		}
> >
> > Please use drm_of_lvds_get_dual_link_pixel_order(), it validates that
> > the DT definition is sound: one port for odd pixels, one port for even
> > pixels.
> 
> It cannot be used, because it get the pixel order for the LVDS source not sink. IT6263 is the LVDS
> sink.
> 
>  * drm_of_lvds_get_dual_link_pixel_order - Get LVDS dual-link pixel order
>  * @port1: First DT port node of the Dual-link LVDS source
>  * @port2: Second DT port node of the Dual-link LVDS source


Can't you use drm_of_lvds_get_dual_link_pixel_order() from host for the same use case. See [1]?

[1]
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/drivers/gpu/drm/renesas/rcar-du/rcar_lvds.c?h=next-20241011

lvds_bridge0: lvds-to-hdmi-bridge at 4c {
		compatible = "ite,it6263";
		reg = <0x4c>;
		ports {
			#address-cells = <1>;
			#size-cells = <0>;

			port at 0 {
				reg = <0>;
				dual-lvds-odd-pixels;
				lvds0_in0: endpoint at 0 {
					remote-endpoint = <&lvds0_out>;
				};
			};

			port at 1 {
				reg = <1>;
				dual-lvds-even-pixels;
				lvds0_in1: endpoint at 1 {
					remote-endpoint = <&lvds1_out>;
				};
			};

			port at 2 {
				reg = <2>;
				it6263_out: endpoint at 2 {
					remote-endpoint = <&lvds_to_hdmi_con_out>;
				};
			};
		};
	};
};

Cheers,
Biju


> 
> >
> >> +	} else if (port1) {
> >> +		ret = -EINVAL;
> >> +		dev_err(dev, "single input LVDS port1 is not supported\n");
> >> +	} else if (!port0) {
> >> +		ret = -EINVAL;
> >> +		dev_err(dev, "no input LVDS port\n");
> >> +	}
> >> +
> >> +	of_node_put(port0);
> >> +	of_node_put(port1);
> >> +
> >> +	return ret;
> >> +}
> >> +
> >
> 
> --
> Regards,
> Liu Ying