[PATCH 3/5] arm64: dts: imx8mp-msc-sm2s-ep1: Add HDMI connector

Marek Vasut marex at denx.de
Fri Oct 18 09:35:53 UTC 2024


On 10/18/24 11:00 AM, Liu Ying wrote:
> On 10/18/2024, Marek Vasut wrote:
>> On 10/18/24 8:48 AM, Liu Ying wrote:
>>> Add a HDMI connector to connect with i.MX8MP HDMI TX output.
>>> This is a preparation for making the i.MX8MP LCDIF driver use
>>> drm_bridge_connector which requires the DRM_BRIDGE_ATTACH_NO_CONNECTOR
>>> flag.  With that flag, the DW HDMI bridge core driver would
>>> try to attach the next bridge which is the HDMI connector.
>>>
>>> Signed-off-by: Liu Ying <victor.liu at nxp.com>
>>> ---
>>>    .../dts/freescale/imx8mp-msc-sm2s-ep1.dts     | 19 +++++++++++++++++++
>>>    1 file changed, 19 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
>>> index 83194ea7cb81..b776646a258a 100644
>>> --- a/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
>>> +++ b/arch/arm64/boot/dts/freescale/imx8mp-msc-sm2s-ep1.dts
>>> @@ -15,6 +15,17 @@ / {
>>>                 "avnet,sm2s-imx8mp-14N0600E", "avnet,sm2s-imx8mp",
>>>                 "fsl,imx8mp";
>>>    +    hdmi-connector {
>>> +        compatible = "hdmi-connector";
>>> +        type = "a";
>> Shouldn't this also have a 'label' property ?
> 
> 'label' property is not required by hdmi-connector.yaml and there
> are in-tree hdmi-connector nodes that haven't got it.
> I tried to find schematics for the board online, but failed.
> I don't have the board to see the label printed in silk layer, either.
> 
> If anyone can provide a valid label name, I may add it.
For the Kontron board, Frieder might be able to look it up for you ?

For the MSC one, hmmm, I am not sure. Anyone ?


More information about the dri-devel mailing list